GAINS PDM2 · Gearboxes · 4R100 and E4OD

Ford · Automatic

4R100 and E4OD standalone controller for Ford big-block, 7.3 Power Stroke, Godzilla 7.3 swaps

The heavy-duty Ford four-speed. Same control pattern as the 4R70W; planned for direct control.

ControlDirect control
StatusPlanned · v1 target
Gears4
Also calledE4OD, 4R100
Common swaps

Where it ends up.

Ford Super Duty and full-size trucks and vans, 1989 on.

Ford big-block, 7.3 Power Stroke, Godzilla 7.3heavy-duty truck and tow builds
Direct control

What PDM2 runs.

PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.

  • Shift solenoids and coast clutch
  • Converter clutch
  • Electronic pressure control
  • Speed sensors, range sensor, fluid temperature

With ECU2

ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

FAQ
Can the GAINS PDM2 control a 4R100 and E4OD?

It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the 4R100 and E4OD?

Ford big-block, 7.3 Power Stroke, Godzilla 7.3: heavy-duty truck and tow builds.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Ford and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist