With ECU2
ECU2 supplies road speed for the reverse lockout and runs flat-shift and launch from the clutch input.
GAINS PDM2 · Gearboxes · T56 Magnum
Tremec · ManualThe aftermarket six-speed built for swaps. PDM2 handles its reverse lockout and speed signal.
Aftermarket six-speed for swaps, in rear-mid and remote-shift versions.
| GM LS / LT, Ford Coyote, Mopar Hemi | G-body, Nissan 350Z, Lexus IS300, BMW E30 and Pro Touring builds |
|---|
Swap guides that use the T56 Magnum:
No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor.
ECU2 supplies road speed for the reverse lockout and runs flat-shift and launch from the clutch input.
It is planned (v1 target). No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor. Nothing is supported until bench and vehicle logs and an engineering review are done.
GM LS / LT, Ford Coyote, Mopar Hemi: G-body, Nissan 350Z, Lexus IS300, BMW E30 and Pro Touring builds.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies road speed for the reverse lockout and runs flat-shift and launch from the clutch input.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Tremec and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist