GAINS PDM2 · Gearboxes · TH400, TH350, Powerglide and C4

GM / Ford · Non-electronic automatic

TH400, TH350, Powerglide and C4: trans-brake and line-lock control

The drag-race classics. Nothing to shift electronically; PDM2 runs the trans-brake and line-lock and ECU2 handles launch.

ControlInterlocks and switches
StatusPlanned · v1 target
Also calledTurbo 400, TH400, TH350
Interlocks and switches

What PDM2 runs.

No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor.

  • Trans-brake solenoid
  • Line-lock solenoid
  • Vehicle speed input
  • Converter lock-up, where fitted

With ECU2

ECU2 runs launch control and staging logic with the trans-brake and line-lock outputs.

FAQ
Can the GAINS PDM2 control a TH400, TH350, Powerglide and C4?

It is planned (v1 target). No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the TH400, TH350, Powerglide and C4?

GM LS and small-block, Ford small-block and Coyote: drag cars, C10s, G-bodies, 240Z, classic Mustangs.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 runs launch control and staging logic with the trans-brake and line-lock outputs.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. GM / Ford and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist