BorgWarner and Garrett, by application · K0 / GT15 family · Gasoline

Ford 3.5 EcoBoost twin turbos (BorgWarner K03 / Garrett GT1549L, Gen 2 BorgWarner)

3.5 EcoBoost turbosF-150 EcoBoost turbosCL3Z-6K682-ACL3Z-6K682-BTwin parallel turbosLeft and right units differGen 1: BorgWarner K03 (trucks) / Garrett GT1549L (transverse)Gen 2: electronic wastegatesWater and oil cooled

The 3.5 EcoBoost turbo setup is a pair of small parallel turbochargers, one per cylinder bank. First-generation F-150s (2011-2016) use BorgWarner K03 units at up to 15 psi (1.0 bar), while transverse cars such as the Taurus SHO and Explorer Sport use Garrett GT1549L units at up to 11 psi (0.76 bar). The second-generation engine from 2017 keeps BorgWarner turbos with electronically actuated wastegates.Medium12

CompressorjournalwaterwastegateTurbine
Illustration of the layout, not the part.

Cars and engines

4 factory applications

VehicleEngineYearsPart number
Ford F-150North America3.5 EcoBoost Gen 12011-2012CL3Z-6K682-A (left), CL3Z-6K682-B (right)Ford rated the F-150 at 365 hp. Wikipedia lists two BorgWarner K03s on F-series engines.21
Ford F-150, Ford Expedition, Lincoln Navigator3.5 EcoBoost Gen 1F-150 2013-2016; Expedition and Navigator 2015-2017DL3Z-6K682-E (left), DL3Z-6K682-F or CL3Z-6K682-F (right) per Garrett's cross-referenceFord rated the Expedition at 365 hp and the Navigator at 380 hp.21
Ford Taurus SHO, Police Interceptor Sedan and Utility, Explorer Sport / Platinum, Flex, Lincoln MKS / MKT, Transit3.5 EcoBoost Gen 1 (transverse and van)2010-2019—Wikipedia lists two Garrett GT1549L turbos at up to 11 psi (76 kPa) on transverse versions. Ratings run from 310 hp (Transit) to 365 hp.Medium1
Ford F-150 (incl. High Output and Raptor), Expedition, Lincoln Navigator, Ford GT, Transit3.5 EcoBoost Gen 2 (D35)2017-present—Wikipedia says BorgWarner continues to supply the turbos, with electronically actuated wastegates and Mar-M-247 turbine wheels. Ratings run from 375 hp to 450 hp on trucks and 647-660 hp on the Ford GT, whose turbos are not documented here.Medium13

Specifications

Wheel sizes vary by source and revision; differences are flagged.

Layout and control

SpecValueSource
LayoutTwo turbos in parallel, one per bank; left and right units have different part numbers2
Gen 1 truck turboBorgWarner K03, up to 15 psi (100 kPa)Medium1
Gen 1 transverse turboGarrett GT1549L, up to 11 psi (76 kPa)Medium1
Gen 2 wastegateElectronically actuatedMedium13
Gen 2 boost changeRevised compressor wheels allow 2.5-16 psi (0.17-1.10 bar) more boost than Gen 1, per WikipediaMedium1
Gen 2 turbine wheel materialMar-M-247 nickel superalloyMedium1

Wheels

SpecValueSource
Stock compressor and turbine wheel sizesNot publishedNeither Ford, BorgWarner nor Garrett publishes OE wheel sizes. Garrett states only relative flow gains for its replacements.UnverifiedLow23
Gen 2 OE flow referenceGarrett's GT2260S replacement: 54% more compressor flow and 52% more turbine flow than OEM3

Two generations, three turbo types

The 3.5 EcoBoost turbo hardware depends on the engine generation and layout.

Gen 1 trucks use BorgWarner K03s, Gen 1 transverse cars use Garrett GT1549Ls, and Gen 2 engines from 2017 use BorgWarner turbos with electronic wastegates.Medium1

The left and right turbos are mirror units with separate part numbers. Order by side and by year, because Ford superseded numbers between 2012 and 2013.2

How to identify your turbos

Start from the engine generation and model year, then read the Ford number on each turbo (for example CL3Z-6K682-A).

Garrett's cross-reference ties these Ford numbers to its PowerMax replacements.2

What the factory turbos support

Ford rated Gen 1 trucks at 365-380 hp and Gen 2 trucks at 375-450 hp.

Those are the only ratings that apply to stock turbos.Medium1

Garrett rates its own drop-in replacements by compressor choke flow: up to 300 hp per turbo for the Gen 1 Stage 1, and up to 700 bhp for the Gen 2 pair. Garrett notes real results depend on the vehicle and calibration.23

Safety when replacing turbos

The turbos sit low in the engine bay next to the exhaust and oil and coolant lines.

Work on a cold engine, support the truck on stands rather than a jack, and replace crush washers and oil feed lines as the service procedure requires.Low2

Common problems

What fails, why, and the usual fix.

  1. 1Wastegate rattle and boost faults

    Usual cause

    Wear in the internal wastegate linkage on Gen 1 turbos, and actuator faults on Gen 2 electronic wastegates.

    Fix

    Check for wastegate play with the actuator disconnected and read boost-related fault codes. Replace the affected turbo by side.Low1

  2. 2Oil consumption or smoke from one bank

    Usual cause

    Seal or bearing wear in one turbo. Because each bank has its own turbo, the fault often shows on one side.

    Fix

    Inspect each compressor inlet and outlet for oil and check shaft play. Replace the failed side with the correct left or right part.Low2

Upgrade paths

The routes owners take from the factory unit.

Bolt-on

Garrett PowerMax Stage 1 (Gen 1, 2011-2017)

Drop-in left and right turbos with forged, fully machined compressor wheels. Garrett states 22% more flow than OEM and up to 300 hp per turbo from choke flow, with CARB EO D-871-6. Garrett marks it not approved for street use.2

Bolt-on

Garrett PowerMax GT2260S Stage 2 (Gen 2, 2017-2020)

Journal-bearing GT2260S pair with 60 mm billet compressor wheels, 50 mm Inconel turbine wheels, 0.45 A/R turbine housings and calibrated electric actuators. Garrett states up to 700 bhp from choke flow and a 176,000 rpm turbo speed limit.3

Hybrid

Hybrid OE turbos

Rebuilders also fit larger wheels into OE housings. Ratings are each seller's claim; compare compressor flow, not peak horsepower figures.Low2

Frequently asked

Who makes the 3.5 EcoBoost turbos?

It depends on the version. Wikipedia lists BorgWarner K03s on Gen 1 F-series trucks, Garrett GT1549Ls on Gen 1 transverse cars such as the Taurus SHO and Explorer Sport, and BorgWarner turbos on the Gen 2 engine from 2017.Medium1

Are the left and right EcoBoost turbos the same?

No. Each bank has its own turbo with its own part number. On 2011-2012 F-150s Ford lists CL3Z-6K682-A for the left and CL3Z-6K682-B for the right, and later trucks use DL3Z-series numbers.2

How much boost does a 3.5 EcoBoost run?

Wikipedia gives up to 15 psi (100 kPa) on Gen 1 trucks and up to 11 psi (76 kPa) on Gen 1 transverse cars. It says the Gen 2 compressor wheels allow between 2.5 and 16 psi more than Gen 1. Actual boost varies with load and calibration.Medium1

What turbos does the Taurus SHO use?

The Taurus SHO uses the transverse 3.5 EcoBoost, which Wikipedia lists with two Garrett GT1549L turbos at up to 11 psi (76 kPa). Ford rated the SHO at 365 hp.Medium1

What are the signs of a failing EcoBoost turbo?

Common signs are a rattle from the wastegate on decel or idle, boost-related fault codes, blue smoke and oil in the intercooler piping from one bank. Because the turbos are separate per bank, check each side for shaft play and oil.Low12

Is there a bolt-on turbo upgrade for the 3.5 EcoBoost?

Yes. Garrett sells PowerMax drop-in pairs for Gen 1 (2011-2017) and Gen 2 (2017-2020) trucks. Garrett rates them from compressor choke flow and marks them for off-road use; the Gen 1 Stage 1 carries a CARB EO number.23

Related

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Ford EcoBoost engine (3.5 L Gen 1 and Gen 2) · Wikipedia · reference · retrieved 2026-11-04
  2. PowerMax F-150 / Expedition / Navigator 3.5L 2011-2017 Stage 1 turbo kit · Garrett Motion · vendor-doc · retrieved 2026-11-04
  3. PowerMax 2017+ Ford Raptor / F-150 3.5L EcoBoost turbo upgrade (GT2260S) · Garrett Motion · vendor-doc · retrieved 2026-11-04

Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.