Cars and engines
5 factory applications
| Vehicle | Engine | Years | Part number |
|---|---|---|---|
| Nissan GT-R (R35, CBA) | VR38DETT | 2007-2010 | —Wikipedia lists 480 PS (353 kW) rising to 485 PS (357 kW).Medium2 |
| Nissan GT-R (R35, DBA) | VR38DETT | 2010-2016 | —530 PS (390 kW), then 550 PS (405 kW) from the 2012 update.Medium2 |
| Nissan GT-R (R35, 4BA) | VR38DETT | 2016-2025 | —570 PS (419 kW); Wikipedia says turbos were revised for the 2020 model year.Medium2 |
| Nissan GT-R Nismo / Track Edition | VR38DETT | 2013 on | —Larger turbochargers from the GT3 race car; 600 PS (441 kW). Upgraded again in the 2019 Nismo update.Medium21 |
| Praga Bohema | VR38DETT (as PL38DETT, tuned by Litchfield) | 2023 on | —Medium1 |
Specifications
Wheel sizes vary by source and revision; differences are flagged.
Layout and hardware
| Spec | Value | Source |
|---|---|---|
| Layout | Two IHI turbos in parallel, one per cylinder bank | Medium21 |
| Turbine housing | Integrated into the exhaust manifold | Medium123 |
| Model | IHI RHF55 | Medium23 |
| Boost | More than 0.7 bar (10 psi)The only figure Wikipedia gives; Nissan raised boost-holding capability with cooling changes for 2017. | Medium2 |
Wheel and rotor figures (one source, unconfirmed)
| Spec | Value | Source |
|---|---|---|
| Compressor wheel | 60 mm / 46.5 mm, 6+6 bladesFrom a parts listing quoted by GTRUSA; the author doubts it describes the standard GT-R turbo. | UnverifiedLow3 |
| Turbine wheel | 53 mm / 48 mm, 11 bladesSame listing; floating metal (journal) bearing stated. | UnverifiedLow3 |
| Maximum turbine speed | 165,000 rpmSame listing. | UnverifiedLow3 |
What the VR38 turbos are
The VR38 turbos are a pair of IHI units on the 3.8 L VR38DETT V6 that powered the R35 Nissan GT-R from 2007 to 2025.
Each bank of three cylinders drives its own turbo.Medium12
Nissan cast each turbine housing into its exhaust manifold. Wikipedia says the aim was to reduce lag and weight.Medium2
How the turbos changed over the R35's life
Rated output climbed from 480 PS (353 kW) in 2007 to 570 PS (419 kW) from 2016.
Much of that came from mapping, intake, exhaust and cooling changes; Wikipedia credits the 2017 cooling upgrade with letting the car hold higher boost.Medium2
For the 2020 model year Nissan fitted revised turbochargers, which Wikipedia says improved response and efficiency by 5 percent.Medium2
Nismo cars from 2013 used larger turbos from the GT3 race car and reached 600 PS (441 kW). The 2019 Nismo update lists upgraded turbochargers again.Medium2
Why the integrated manifold matters
Because the turbine housing is part of the manifold, a turbo change on a VR38 is a manifold change too.
Replacing or upgrading the turbos means removing manifold and turbo as one assembly.Medium13
Upgrade paths therefore come as complete turbo-and-manifold assemblies or as full kits such as HKS's R35 turbine kits.Low34
Working on them safely
Turbo removal on an R35 is a lift job.
Use a rated two-post lift or stands, let the exhaust cool fully, and treat the oil and coolant lines to the turbos as hot and pressurized until the engine has cooled.Low1
Common problems
What fails, why, and the usual fix.
1Every turbo replacement is also a manifold job
Upgrade paths
The routes owners take from the factory unit.
Later or Nismo GT-R turbos onto an earlier car
Nismo cars used larger GT3-derived turbos and later cars got revised turbos for 2020. Fitting them to an earlier R35 needs matching calibration; check part compatibility for your model year.Low2
Full turbo kit with separate manifolds
HKS lists R35 GT900 and GT1000 full turbine kits; confirm with the maker exactly which manifold and turbo parts each kit includes. Compare compressor maps such as the G30-900 against your airflow target per bank.Low45
Garrett G30-900 compressor map →Frequently asked
What turbos are on the R35 GT-R?
Two parallel IHI turbos, one per cylinder bank of the 3.8 L VR38DETT. Wikipedia names them IHI RHF55 and notes their turbine housings are integrated into the exhaust manifolds. Nissan revised them for the 2020 model year, and Nismo cars use larger GT3-derived units.Medium21
Are the GT-R turbos built into the exhaust manifold?
Yes. Wikipedia says the turbine housings of both IHI turbos are integrated into the exhaust manifolds to reduce lag and weight. That means changing a turbo also means removing or replacing that side's manifold.Medium12
What is different about the GT-R Nismo turbos?
Wikipedia says the Nismo GT-R used larger turbochargers from the GT3 race car, part of the change to 600 PS (441 kW), and that the 2019 Nismo update fitted upgraded turbochargers again.Medium2
How much boost does a stock GT-R run?
Wikipedia gives only one figure: more than 0.7 bar (10 psi). Boost varies by model year and conditions, and Nissan raised boost-holding ability with cooling changes for 2017. Check logged data from your own car rather than a single number.Medium2
Did Nissan change the turbos over the R35's life?
Yes. Wikipedia lists revised turbochargers for the 2020 model year, credited with 5 percent better response and efficiency, plus larger GT3-derived turbos on Nismo cars and upgraded Nismo turbos in the 2019 update.Medium2
Related
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Nissan VR engine (VR38DETT) · Wikipedia · reference · retrieved 2026-11-04
- Nissan GT-R · Wikipedia · reference · retrieved 2026-11-04
- Nissan GT-R turbos R32, R33, R34, R35 (Sean Morris, 2010) · GTRUSA Blog · community · retrieved 2026-11-04
- R35 GT-R GT1000 full turbine kit · HKS USA · vendor-doc · retrieved 2026-11-04
- Full turbine kit R35 GT900 · HKS USA · vendor-doc · retrieved 2026-11-04
Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.

