Garrett (for Nissan) · T2 family · Gasoline

Nissan RB26DETT twin turbos (Garrett T28 / T25 type)

RB26 turbosR32 GT-R turbosR33 GT-R turbosR34 GT-R turbosTwin parallel turbosCeramic turbine wheel (standard)Steel turbine wheel (N1)Ball bearing on R34Internal wastegates

The RB26 turbos are a pair of small Garrett-built units, one per bank of three cylinders, on the Skyline GT-R's 2.6 L RB26DETT. Standard units have ceramic turbine wheels; Nismo N1 versions use steel. Wikipedia names them T25 in one place and T28 in another. Owners report the ceramic wheels can break above about 1.1 bar (16 psi), which drives most upgrades.Medium12

CompressorjournalwastegateTurbine
Illustration of the layout, not the part.

Cars and engines

6 factory applications

VehicleEngineYearsPart number
Nissan Skyline GT-R (BNR32)RB26DETT1989-199314411-05U20 (1989-1991); 14411-05U21 / 14411-05U22 (1991-1993)Ceramic turbine wheels.Medium21
Nissan Skyline GT-R (BCNR33)RB26DETTR33 generation14411-24U04 (standard)Medium21
Nissan Skyline GT-R (BCNR33) N1RB26DETT N1R33 generation14411-24U10N1 turbos use steel turbine wheels; GTRUSA lists the unit at 280 PS.Medium21
Nissan Skyline GT-R (BNR34)RB26DETTR34 generation (to 2002)—Ball-bearing turbos with ceramic turbine wheels; N1 versions use Garrett GT25 ball-bearing units.Medium1
Nissan Stagea 260RS (WGNC34)RB26DETTNot stated—Medium1
Nismo replacement for BNR32RB26DETTAftermarket OEM option14411-06U00GTRUSA lists it at 300 PS; ATP sells a Garrett GT2860 journal-bearing unit in RB26 housings under this Nissan number.Medium23

Specifications

Wheel sizes vary by source and revision; differences are flagged.

Layout and hardware

SpecValueSource
LayoutTwo turbos in parallel, one per three-cylinder bank, with intercoolerMedium1
FrameGarrett T25 or T28 typeWikipedia's text says T25-type and its infobox says T28-type; N1 units are described as T25 / GT25.Sources differMedium1
Turbine wheel materialCeramic (standard); steel (N1)Medium12
BearingJournal (R32, R33); ball bearing (R34)Medium1
WastegateInternal, one per turboMedium1
Compressor and turbine wheel sizesNot found in a reliable sourceNo Nissan or Garrett figure found for the stock wheels; aftermarket GT2860R replacements list about 47 mm inducer and 60 mm exducer.UnverifiedLow56

Factory boost

SpecValueSource
Wastegate setting (Wikipedia)About 10 psi (0.69 bar)Medium1
Peak boost by model (GTRUSA)R32 ~0.8 bar (11.5 psi); R33 ~0.9 bar (13 psi); R34 ~1.0 bar (14.5 psi)Low2
Ceramic wheel risk threshold (owner-reported)About 1.1 bar (16 psi)An owner-community figure, not a Nissan limit.Low2

What the RB26 turbos are

The RB26 turbos are two small Garrett units on the RB26DETT, the 2.6 L straight-six in the R32, R33 and R34 Skyline GT-R.

Each turbo feeds from its own three-cylinder exhaust manifold, and both share one intercooler.Medium1

Nissan advertised 280 PS (206 kW) under Japan's gentlemen's agreement, later rated 320 PS (235 kW) by end of production. Wikipedia notes enthusiasts believed real output was nearer the higher figure from the start.Medium1

T25 or T28?

Sources disagree on the name.

Wikipedia's RB page calls them T25-type in its text and T28-type in its infobox, and describes the N1 units as T25 and, on the R34, GT25.Medium1

The useful distinction is generation and wheel material, not the frame label. Identify a pair by the Nissan 14411- number on the tag.Low2

Ceramic vs N1 steel turbine wheels

Standard RB26 turbos use ceramic turbine wheels to cut inertia.

Nismo's N1 turbos, built for Group A and Group N racing, use steel wheels instead.Medium1

GTRUSA reports the ceramic wheel is prone to breaking off above about 1.1 bar (16 psi).Low2

The R34 moved to ball-bearing turbos and kept ceramic exhaust wheels; the R34 N1 used Garrett GT25 ball-bearing units with steel wheels.Medium1

Working on them safely

Turbo work on a GT-R usually means time under the car.

Support it on rated stands, never on a jack alone, and let the exhaust cool fully before loosening manifold studs.Low1

Common problems

What fails, why, and the usual fix.

  1. 1Ceramic turbine wheel breaking up

    Usual cause

    Running boost above the factory level, owner-reported from about 1.1 bar (16 psi), and age.

    Fix

    Keep standard turbos near factory boost, or replace with steel-wheel N1 or aftermarket units before raising boost.Low21

  2. 2Smoke from one bank and loss of boost

    Usual cause

    Seal or bearing wear on one turbo of the pair.

    Fix

    Replace or rebuild both turbos as a matched pair so flow stays equal between banks.Low2

Upgrade paths

The routes owners take from the factory unit.

OEM swap

Nismo N1 turbos (steel wheel)

N1 turbos keep the factory layout but use steel turbine wheels, removing the ceramic-wheel limit. GTRUSA lists the R33 N1 unit as 14411-24U10.Medium21

Bolt-on

Garrett GT2860R-5 pair

A ball-bearing pair marketed as a Skyline GT-R replacement, listed at 47.2 mm inducer and 62 trim. Z1 Motorsports sells it as an RB26DETT bolt-on upgrade.Low56

Bolt-on

Garrett GTX2871R / GTX2867R drop-in pair

ATP sells GTX-series drop-in RB26 turbos in factory-style housings; the GTX2871R lists a 54.1 mm inducer and 71.4 mm exducer. Compare against the GTX2867R Gen II map.Low4

Garrett GTX2867R Gen II compressor map →
Twins to single

Single turbo on a new manifold

Many high-output RB26 builds replace both turbos with one larger unit on a single manifold. Compare compressor maps such as the GTX3582R Gen II against the target airflow.Low2

Garrett GTX3582R Gen II compressor map →

Frequently asked

What turbos does the RB26DETT have?

Two small Garrett-built turbos in parallel, one for each bank of three cylinders. Standard units use ceramic turbine wheels; R32 and R33 units have journal bearings and R34 units ball bearings. Nismo N1 versions use steel turbine wheels.Medium1

Are RB26 turbos T25 or T28?

Sources disagree. Wikipedia's RB page calls them T25-type in the text and T28-type in the infobox, and describes the N1 turbos as T25 or GT25. Identify your pair by the Nissan 14411- part number rather than the frame name.Medium12

How much boost can stock RB26 turbos take?

There is no Nissan rating for more boost. GTRUSA lists factory peaks of about 0.8 bar on the R32 to 1.0 bar on the R34, and reports the ceramic wheels are prone to failure above about 1.1 bar (16 psi). Treat that as an owner figure, not a safe limit.Low2

What is the difference between N1 and standard RB26 turbos?

N1 turbos, made for Group A and Group N racing, use steel turbine wheels instead of ceramic. GTRUSA lists the R33 N1 pair as 14411-24U10. The steel wheel tolerates more boost and heat than the ceramic wheel, at the cost of more inertia.Medium12

Did the R34 GT-R have ball bearing turbos?

Yes. Wikipedia says the R34 moved to ball-bearing turbos while keeping ceramic turbine wheels, and that R34 N1 cars used Garrett GT25 ball-bearing units with steel wheels.Medium1

What are the best bolt-on turbos for an RB26?

There is no single best choice. Common bolt-on paths are N1 turbos, Garrett GT2860R-5 pairs and GTX-series drop-in pairs in factory-style housings. Pick by comparing compressor maps against your target airflow and keep fuel and calibration in step.Low254

Related

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Nissan RB engine (RB26DETT, N1) · Wikipedia · reference · retrieved 2026-11-04
  2. Nissan GT-R turbos R32, R33, R34, R35 (Sean Morris, 2010) · GTRUSA Blog · community · retrieved 2026-11-04
  3. ATP Garrett GT2860 journal bearing with RB26DETT Skyline housings, Nissan P/N 14411-06U00 · Speed Science (ATP Turbo listing) · vendor-doc · retrieved 2026-11-04
  4. ATP Garrett GTX2871R RB26DETT drop-in turbo upgrade · Speed Science (ATP Turbo listing) · vendor-doc · retrieved 2026-11-04
  5. Garrett GT2860R-5 dual ball bearing turbocharger · Raw Brokerage · vendor-doc · retrieved 2026-11-04
  6. Garrett GT2860R RB26DETT turbo upgrade · Z1 Motorsports · vendor-doc · retrieved 2026-11-04

Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.