Cars and engines
3 factory applications
| Vehicle | Engine | Years | Part number |
|---|---|---|---|
| Toyota Supra Turbo (JZA80, North America and Europe) | 2JZ-GTE | Export A80 generation | CT12B pairSequential layout; stainless-steel turbine wheels. Toyota rated export cars at 320 hp (239 kW) at 5,600 rpm.Medium1 |
| Toyota Soarer GT, Mark II 2.5GT Twin Turbo (JZX81), Supra 2.5 Twin Turbo R (JZA70) | 1JZ-GTE (gen 1) | From 1991 (Soarer GT) | CT12A pair (17201-46010 listed by sellers as CT12A or CT12B)Parallel twins with ceramic turbine wheels.Medium12 |
| Toyota 4Runner, Land Cruiser TD (diesel) | 1KZ-TE (3.0 L diesel) | Not stated in sources | 17201-67010, 17201-67040Low34 |
Specifications
Wheel sizes vary by source and revision; differences are flagged.
Layout and hardware
| Spec | Value | Source |
|---|---|---|
| Layout (export 2JZ-GTE) | Sequential twin, co-developed with Hitachi, air-to-air side-mount intercooler | Medium1 |
| Layout (1JZ-GTE gen 1) | Parallel twin CT12A, side- or front-mount intercooler | Medium1 |
| Turbine wheel material | Stainless steel (export 2JZ CT12B); ceramic (1JZ CT12A) | Medium1 |
| Model name for 17201-46010 | CT12A or CT12BWikipedia names the 1JZ-GTE pair CT12A; one replacement seller sells 17201-46010 as a CT12B for the JZA70 1JZ-GTE. | Sources differLow12 |
| Wastegate | Internal | Low2 |
| Wheel sizes | Not found in a reliable sourceNo Toyota figure found. | UnverifiedLow2 |
| Factory boost | Not stated by Wikipedia for any generationCheck the service manual. | UnverifiedLow1 |
What the CT12B is
The CT12B turbo is a small Toyota unit best known as the pair on the export 2JZ-GTE in the A80 Supra Turbo.
Japanese-market engines used CT20-series turbos with ceramic wheels instead.Medium1
The 2JZ-GTE's sequential system was co-developed with Hitachi. Export cars got 550 cc/min injectors and Toyota's 320 hp (239 kW) rating.Medium1
How the 2JZ sequential system works
In a sequential system one turbo carries the engine at low rpm, and valves bring the second turbo in as flow rises.
The aim is small-turbo response with two-turbo top-end flow.Medium1
The extra valves, actuators and vacuum lines add failure points. A sticking valve or split hose can make the second turbo come in late or not at all.Low1
The CT12A on the 1JZ-GTE
The first-generation 1JZ-GTE, introduced in the 1991 Soarer GT, used two CT12A turbos in parallel.
Wikipedia says their ceramic turbine wheels were prone to delamination at high shaft speed and temperature.Medium1
Around 1996 Toyota replaced the pair with a single CT15B on the VVT-i 1JZ-GTE.Medium1
How to identify one
Read the Toyota 17201- number on the tag.
Sellers list 17201-46010 for the JZA70 1JZ-GTE and 17201-67010 and 17201-67040 for the 1KZ-TE diesel.Low234
Sellers disagree on whether 17201-46010 is a CT12A or CT12B, so confirm wheel material and housing before buying parts.Low21
Common problems
What fails, why, and the usual fix.
1Ceramic turbine wheel delamination (1JZ-GTE CT12A)
Usual causeHigh shaft speed and exhaust temperature, made worse by raised boost.
FixKeep factory boost on ceramic units or replace them; Toyota's own fix was the later single-turbo engine.Medium1
2Second turbo on a 2JZ-GTE coming in late or not at all
Usual causeSequential control valves, actuators or vacuum lines leaking or sticking.
FixTest each vacuum line and actuator before replacing turbos.Low1
Upgrade paths
The routes owners take from the factory unit.
Export CT12B pair onto a JDM 2JZ-GTE
Owners swap the steel-wheel export pair for the ceramic-wheel JDM CT20 pair before raising boost.Low1
Sequential twins → large single turbo
Most high-output 2JZ builds drop the sequential system for one larger turbo on a new manifold. Compare candidate maps such as the EFR 7670 against the engine's airflow target.Low1
BorgWarner EFR 7670 compressor map →Frequently asked
What turbos does the 2JZ-GTE have?
Two sequential turbos. Wikipedia says export engines in the North American and European A80 Supra use CT12B units with stainless-steel turbine wheels, and Japanese-market engines use CT20-series units with ceramic wheels. The system was co-developed with Hitachi.Medium1
What is the difference between CT12A and CT12B?
Wikipedia names the parallel pair on the first-generation 1JZ-GTE as CT12A, with ceramic turbine wheels, and the sequential pair on the export 2JZ-GTE as CT12B, with steel wheels. Some replacement sellers label 1JZ-GTE part 17201-46010 as CT12B, so check the tag.Medium12
Are US Supra turbos ceramic?
No. Wikipedia says the export 2JZ-GTE CT12B turbos use stainless-steel turbine wheels, while the Japanese-market CT20 turbos are ceramic. That is why owners often prefer export turbos when raising boost on a JDM engine.Medium1
Why do 1JZ-GTE twin turbos fail?
The early 1JZ-GTE's parallel CT12A turbos have ceramic turbine wheels, which Wikipedia describes as prone to delamination under high shaft speed and temperature. Raised boost makes it more likely. Toyota moved to a single CT15B on the later VVT-i engine.Medium1
Should I go single turbo on a 2JZ?
It depends on goals. The factory sequential pair gives early boost but has more valves and lines to fail. A single turbo simplifies plumbing and can flow more, but needs a new manifold, oil and water lines, and a matching fuel system and calibration.Low1
Related
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Toyota JZ engine (1JZ-GTE, 2JZ-GTE) · Wikipedia · reference · retrieved 2026-11-04
- CT12B turbocharger core 17201-46010 for Toyota Supra JZA70 1JZ-GTE · LeadTurbo · vendor-doc · retrieved 2026-11-04
- 17201-67010 CT12B turbocharger replacement for Toyota 4Runner 1KZ-TE · LeadTurbo · vendor-doc · retrieved 2026-11-04
- CT12B turbocharger 17201-67040 for Toyota Land Cruiser TD 1KZ-TE · FridayParts · vendor-doc · retrieved 2026-11-04
Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.

