Compressor pressure ratio calculator
Compressor pressure ratio = absolute pressure after the compressor ÷ absolute pressure at its inlet. At sea level, 14.7 psi of boost with typical losses is a pressure ratio of about 2.3; at altitude the same boost needs more.
Result
Planning estimate from the formula below, not a measurement.
How it works
The formula, the method step by step, then a worked example.
PR = (P_amb + boost + ΔP_loss) ÷ (P_amb − ΔP_inlet); P_amb = 14.696 × (1 − 6.8754×10⁻⁶ × ft)^5.2559
- Convert boost to absolute pressure by adding ambient pressure, which falls with altitude.
- Add downstream losses to get compressor outlet pressure; subtract inlet losses to get compressor inlet pressure.
- Their ratio is the compressor map's y-axis.
Worked example
Inputs
- Boost (gauge)
- 14.7 psi
- Altitude
- 0 ft
- Intercooler and piping pressure loss
- 2 psi
- Intake (pre-turbo) pressure loss
- 1 psi
Result
Assumptions and limits
- Standard atmosphere for ambient pressure; weather changes it by a few percent.
Related terms
Frequently asked
What is pressure ratio on a turbo?
Pressure ratio is absolute compressor outlet pressure divided by absolute inlet pressure. At sea level, 14.7 psi of boost is a pressure ratio of about 2.0 before losses, and about 2.3 with typical intercooler and filter losses.
Why does altitude increase pressure ratio?
Ambient pressure drops with altitude, so the compressor must squeeze thinner air harder to reach the same manifold pressure. At 5,000 ft, ambient is about 12.2 psia, so the same boost target needs a higher pressure ratio.
How do I use pressure ratio on a compressor map?
Plot pressure ratio on the vertical axis against corrected airflow on the horizontal axis at several rpm points. The points should sit in the efficient islands and to the right of the surge line.
Answers draw on the sources below.
Sources
- Turbo Tech 103: Expert compressor matching · Garrett Motion
- U.S. Standard Atmosphere, 1976 · NOAA / NASA / USAF
Spot an error? Tell us.

