Honda (Acura) · Analog 0-5 V (ratiometric)

Honda / Acura 16400-RBB-A01 K24A2 electronic throttle body (2006-08 TSX)

Acura 16400-RBB-A01Acura 16400-RBB-J02Acura 16400-RLG-J01

Acura 16400-RBB-A01 is the electronic-control (drive-by-wire) throttle body for the 2006-08 Acura TSX with the K24A2. Acura lists it for US-market cars with 5-speed automatic or 6-speed manual. The 2004-05 TSX uses a different body, 16400-RBB-J02, and later TSX bodies carry RL5 and RLG numbers.12

Key specifications

Measures: Throttle plate angle (redundant tracks); motor-driven throttle actuator. Output: Analog 0-5 V (ratiometric).

Acura descriptionThrottle body, electronic control (GMA9A)Sourced12
Shipping weight3.30lb1.5 kgDealer listing weight, may include packaging.Sourced · medium1
BoreUnverifiedHonda's parts catalog does not state the bore; retail figures are not used here.Researched, unverified
Connector pinoutUnverifiedHonda's public parts catalog does not publish the pinout; reseller and forum pinouts are not used here.Researched, unverified
Sensor type and output slopesUnverifiedNot published in the Honda parts data cited.Researched, unverified
Part numberMakerNote
16400-RBB-A01Acura2006-08 TSX, type GMA9A12
16400-RBB-J02AcuraDifferent TSX throttle body (replaces 16400-RBB-J01); not a supersession of A012
16400-RLG-J01AcuraLater TSX electronic throttle body (GME1A, replaces 16400-RL5-A01); not interchangeable without checking2

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Throttle tracks on AVI1/AVI2 (pins 17-18) with the pull-up off; motor on the H-bridge pins 21-22 of the ECU2. Concept hardware: the drive-by-wire path needs qualified-human review before release.Medium4
Haltech (Elite / Nexus)UnverifiedNot checked against a public Haltech document that names this throttle body. Confirm drive-by-wire support and the setup with Haltech before wiring.No public source
Link (G4X)UnverifiedNot checked against a public Link document that names this throttle body. Confirm drive-by-wire support and the setup with Link before wiring.No public source
MoTeC (M1)UnverifiedNot checked against a public MoTeC document that names this throttle body. Confirm drive-by-wire support and the setup with MoTeC before wiring.No public source
ECUMaster (EMU Black)UnverifiedNot checked against a public ECUMaster document that names this throttle body. Confirm drive-by-wire support and the setup with ECUMaster before wiring.No public source
AEM (Infinity)UnverifiedNot checked against a public AEM document that names this throttle body. Confirm drive-by-wire support and the setup with AEM before wiring.No public source
MaxxECUUnverifiedNot checked against a public MaxxECU document that names this throttle body. Confirm drive-by-wire support and the setup with MaxxECU before wiring.No public source
Holley (Terminator X / EFI)UnverifiedNot checked against a public Holley document that names this throttle body. Confirm drive-by-wire support and the setup with Holley before wiring.No public source

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

Acura's TSX catalog lists four throttle bodies across the model's life. Order by the number on the body, not by car, and check whether the donor ECU or a standalone will run its throttle control.2

On a standalone ECU, wire both throttle tracks to dedicated analog inputs and the motor to the ECU's H-bridge, using Honda service data for this body.Medium34

Failure modes and checks

Throttle body does not match the swap harness

Likely cause A 2004-05 (RBB-J02) or later (RL5/RLG) body was supplied

Check Compare the part number on the body with 16400-RBB-A01 before wiring.2

Limp mode or no throttle after a swap

Likely cause ECU not configured for this body or tracks disagree

Check Log both throttle tracks through a slow sweep and run the ECU's throttle learn.Low3

Frequently asked

What throttle body does the 2006-2008 TSX use?

Acura part 16400-RBB-A01, an electronic-control throttle body, for US-market 2006-08 TSX with automatic or manual.1

What is the difference between 16400-RBB-A01 and 16400-RBB-J02?

They are separate Acura numbers: J02 (replacing J01) is listed for the earlier TSX, A01 for 2006-08. Acura does not list one as replacing the other.Medium21

Will a TSX throttle body fit a K-series swap?

It bolts to K24A2 intakes; whether it runs depends on the ECU. A drive-by-wire body needs an ECU with electronic throttle control and a matching pedal.Low13

Related

Use it with GAINS

Honda / Acura 16400-RBB-A01 K24A2 electronic throttle body (2006-08 TSX) on GAINS hardware

ECU2AVI1-AVI2 (TPS1/TPS2) + HB1/HB2 (motor)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Throttle tracks on AVI1/AVI2, motor on the H-bridge pins 21-22 (about 3 A continuous / 10 A peak, under review). DBW sensors never over CAN.Medium4

Drive-by-wire control is safety-relevant; the ECU2's DBW path needs qualified-human review before release.4

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.45

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

  1. Genuine Acura 16400-RBB-A01 Throttle Body, Electronic Control (GMA9A) · AutoPartsPrime (Honda/Acura parts dealer) · oem · retrieved 2026-11-04
  2. Acura TSX throttle bodies (catalog) · AcuraPartsWarehouse (Acura parts dealer) · oem · retrieved 2026-11-04
  3. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  4. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  5. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)

Not yet indexed: more than 40% of specs unverified.