Bosch · Analog 0-5 V (ratiometric)
Bosch PSS-140 fluid pressure sensor, 0-140 bar (0 261 545 053)
Bosch 0 261 545 053 is the PSS-140, an absolute fluid pressure sensor for 0-140 bar (0-2,030 psi), designed for gasoline direct-injection rails but also rated for Diesel, oil, transmission fluid and brake fluid. It runs on 5 V with a ratiometric 0.5-4.5 V output at 28.57 mV per bar. Pins: 1 ground, 2 signal, 3 supply; M10x1 sealed-cone thread.2
Key specifications
Measures: Absolute fluid pressure, 0-140 bar (0-2,030 psi). Output: Analog 0-5 V (ratiometric).
- M10x1, 27 mm hex, sealed cone
- 22 ± 2 N·m in aluminium, 32.5 ± 2.5 N·m in steel
| Part number | Maker | Note |
|---|---|---|
| 0 261 545 053 | Bosch | Printed 0261.545.053 on the data sheet2 |
Pinout and connector
- Supply
- Ground / return
- Signal
- Shield
- Not used / not listed
| Pin | Function (as published) | Typical ECU input | Wire note |
|---|---|---|---|
| 1 | Ground | Sensor ground | Return to sensor ground, not chassis |
| 2 | Signal | Analog voltage input (pull-up off) | — |
| 3 | Supply (5 V) | +5 V sensor reference | — |
Pin functions as Bosch publishes them. Note the order differs from the Bosch PS-A air sensors (pin 1 supply there).2 The ECU-input and wire columns are our general guidance, not the maker's.
Connector: Bosch Compact, 3-pole; mating part D261.205.366-012 Connector library
Terminals and seals: Not listed: the data sheet gives the mating housing only.
Transfer function and calibration data
Ua = 0.5 V + 0.02857 V/bar × p (at Us = 5 V)
Points computed from Bosch's sensitivity and offset.
Show the 5 data points
| Absolute pressure (bar) | Output (V) |
|---|---|
| 0 | 0.5 |
| 35 | 1.5 |
| 70 | 2.5 |
| 105 | 3.5 |
| 140 | 4.5 |
How it's calibrated
ECU-neutral: enter these values in whichever ECU you use. Nominal values without the maker's tolerance band.
Transfer function
- 0.5–4.5 V → 0–14,000 kPa absolute (maker: Ua = 0.5 V + 0.02857 V/bar × p (at Us = 5 V))2Calculated from the maker's data
Worked conversion
- At 2.5 V the maker's transfer line gives 7,000 kPa absolute (1,015 psia).2Calculated from the maker's data
Pressure transfer at 5 V: output voltage to pressure (17 rows)Calculated from the maker's data
| Output (V) | Pressure (kPa absolute) | Pressure (psia) |
|---|---|---|
| 0.5 | 0 | 0 |
| 0.75 | 875 | 126.91 |
| 1 | 1750 | 253.82 |
| 1.25 | 2625 | 380.72 |
| 1.5 | 3500 | 507.63 |
| 1.75 | 4375 | 634.54 |
| 2 | 5250 | 761.45 |
| 2.25 | 6125 | 888.36 |
| 2.5 | 7000 | 1015.26 |
| 2.75 | 7875 | 1142.17 |
| 3 | 8750 | 1269.08 |
| 3.25 | 9625 | 1395.99 |
| 3.5 | 10500 | 1522.9 |
| 3.75 | 11375 | 1649.8 |
| 4 | 12250 | 1776.71 |
| 4.25 | 13125 | 1903.62 |
| 4.5 | 14000 | 2030.53 |
Interpolated between the maker's published points; nominal values with no tolerance band.
Native support across ECUs
| ECU platform | Status | How to set it up | Source |
|---|---|---|---|
| GAINS ECU2Concept | Configurable (generic input) | Any AVI (AVI1-6; pins 17-20, 14 and 26 on the ECU2): 0-5 V input with the pull-up off. Concept hardware. | Medium3 |
| Haltech (Elite / Nexus) | Configurable (generic input) | One of the 11 0-5 V analog inputs listed for the Nexus R3 (switchable 5 V pull-up, set off); enter the maker's transfer function. | Medium5 |
| Link (G4X) | Configurable (generic input) | Analogue voltage input (9 on the G4X FuryX). Link's public page does not describe how a custom calibration is entered. | Medium6 |
| MoTeC (M1) | Configurable (generic input) | Analogue voltage input (17 on the M150). The public page does not describe calibration entry for this sensor. | Medium7 |
| ECUMaster (EMU Black) | Configurable (generic input) | One of 9 analog 0-5 V inputs (10-bit) on the EMU Black. The page lists user-defined characteristics only for fuel pressure. | Medium8 |
| AEM (Infinity) | Configurable (generic input) | Analog 0-5 V input (12-bit). AEM's spec sheet does not say how a custom calibration is entered. | Medium9 |
| MaxxECU | Configurable (generic input) | Extra 0-5 V input on the RACE. The public page does not describe calibration entry. | Medium10 |
| Holley (Terminator X / EFI) | Unverified | Not checked: we cite only public product pages, and none for Holley covers this sensor. | No public source |
Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.
Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.
CAD and drawings
- Data sheetPressure Sensor Fluid PSS-140 data sheet (PDF)2Download from Bosch MotorsportNo login at last check; the maker may change this
We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.
Wiring and installation
Pin 1 ground, pin 2 signal, pin 3 5 V supply: three wires to an analog input with no pull-up. Bosch states protection against overvoltage, reverse polarity and short circuit.2
Fuel at these pressures is a fire and injection-injury hazard. Depressurise the system first, use the sealed-cone seat at the specified torque and leak-check before running. Bosch advises against mounting the sensor directly on the engine block because of vibration.Medium21
Failure modes and checks
Likely cause Sensor not seeing pressure: blocked port or a closed valve
Check Check the port and line; 0.5 V is Bosch's zero-pressure output.Medium2
Likely cause Pins 1 and 3 swapped (this sensor puts ground on pin 1, supply on pin 3)
Check Measure the harness at the connector before plugging in.2
Likely cause Mounted on the block, exposed to vibration beyond its rating
Check Move it to a bracket or line mount as Bosch recommends.Medium2
Test it with a multimeter
- Key on, engine off, port open to air: back-probe signal to sensor ground and expect about 0.53 V; the supply pin should read the ECU's 5 V reference.2Calculated from the maker's data
Frequently asked
What is the pinout of the Bosch PSS-140?
Pin 1 ground, pin 2 signal, pin 3 5 V supply, on a 3-pole Bosch Compact connector (mating housing D261.205.366-01).2
Can the PSS-140 measure brake or oil pressure?
Yes. Bosch designs it for direct-injection fuel but lists Diesel, engine oil, transmission oil and brake fluid as compatible media. Its 140 bar span gives coarse resolution for low-pressure oil, so a smaller sensor suits that job better.Medium2
What is the transfer function of the PSS-140?
0.5 V at 0 bar rising 28.57 mV per bar to 4.5 V at 140 bar, with a 5 V supply. Bosch rates accuracy at ±1 % of full scale from 0 to 100 °C.2
Related
Use it with GAINS
Bosch PSS-140 fluid pressure sensor, 0-140 bar (0 261 545 053) on GAINS hardware
GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.34
Concept Pre-release hardware. Pin assignments come from the current design documents and may change.
Sources
10 sources
- Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-11-04
- Pressure Sensor Fluid PSS-140 data sheet (27 Jan 2026) · Bosch Motorsport (Bosch Engineering GmbH) · vendor-doc · retrieved 2026-11-04
- internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
- internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
- Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-11-04
- G4X FuryX product page · Link Engine Management · vendor-doc · retrieved 2026-10-27
- M150 product page (M1 series) · MoTeC · vendor-doc · retrieved 2026-10-27
- EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-11-04
- Infinity Series 5 hardware specification · AEM Electronics · vendor-doc · retrieved 2026-10-27
- MaxxECU RACE product page · MaxxECU · vendor-doc · retrieved 2026-11-04

