Engine: K24A1 / K24A4 (CR-V / Accord)
Part of the Honda K-series family. The budget K24 swap block
Modeled power and torque
Modelled estimate, not a dyno result.
Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.
Stock is anchored to the factory rating (160 hp at 5500 rpm, 161 lb-ft at 4500 rpm); the curve shape between peaks is modeled. Intake + exhaust + tune (pump fuel): Typical NA gains come mostly above mid-rpm.
K24A1 / K24A4 (CR-V / Accord) data
- Load sensing
- MAP speed-density
- O2 sensor
- wideband A/F upstream (inferred from K24A2/TSX and K-series practice)
- Closed loop
- A/F-sensor closed loop part load; open loop high load
- Block
- aluminium
- Rods / pistons
- Not yet sourced
- Reported limit
- Very wide spread: rod vendor (Hybrid Racing) says ~250-300 whp on stock rods; forum reports of ~550-600 whp on stock K24 bottom ends (forum anecdote, low confidence)
- Factory
- Honda top-feed (Keihin/Denso family; maker not confirmed)
- Impedance
- high (saturated)
- Direct-fit upgrades
- 2 maker-listed
- Knock
- Honda 30530-PPL-A01 (replaces 30530-PNA-003)
- MAP / MAF
- Honda 37830-PNC-003
- O2 (upstream)
- Honda 36531-PPA-305 (replaces 36531-PPA-A01)
Platform background
The 2003-07 Accord used the K24 in two very different tunes. The North American CM sedan and coupe carry the 160 hp, 9.7:1 K24A4 economy i-VTEC. The CL-chassis Accord sold in Europe and Australasia used the higher-compression K24A3, and the Japanese Euro R used a K20A. The K24A4 is a popular low-cost bottom end for K-swaps and K20/K24 hybrids.
Factory ECU
2354 cc DOHC i-VTEC, 9.7:1, 160 hp @ 5500 rpm, 161 lb-ft @ 4500 rpm, regular unleaded
Sourced3Not confirmed: the 2003 press kit lists electronic throttle control without clearly assigning it to the 2.4
Verify per year and market before planning a swap or DBW calibration.Sourced · medium3Factory ECU: harness cross-reference
From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.
- ECU family
- Honda K-series (RAA)
- Applies to
- 2003-05 Accord 2.4 manual (A04 example 2003-04)
- Not for
- RAA-315 is automatic
2005 manual number not confirmed.
- ECU family
- Honda K-series
- Applies to
- 2006-07 Accord 2.4 manual
Family from maker fitment only.
Factory ECU pinout: pending
No OEM pin table is in our library yet for the K24A1 / K24A4 (CR-V / Accord) factory ECU. No OEM-grade ECM/PCM terminal table could be read for this guide (the factory manuals located online are image-only). Competitor plug-in manuals were not used, by policy. Needed: Honda 2003-2007 Accord Service Manual and Electrical Troubleshooting Manual, PCM connector terminal tables for the K24A4 (and market-specific manual for CL K24A3/K20A). Until then, wire from the harness maker's instructions or the factory service manual.
Factory ECU pinout
No OEM-grade ECM/PCM terminal table could be read for this guide (the factory manuals located online are image-only). Competitor plug-in manuals were not used, by policy. Needed: Honda 2003-2007 Accord Service Manual and Electrical Troubleshooting Manual, PCM connector terminal tables for the K24A4 (and market-specific manual for CL K24A3/K20A).
Plug-and-play harness
No Haltech S3 plug-in harness is listed for this vehicle, but a Boomslang adapter harness is: it plugs into the factory ECU connector on one side and the S3 pinout on the other, so the ECU2 replaces the factory ECU without cutting the loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.
| Maker | Harness | Fits | Link | |
|---|---|---|---|---|
![]() | Manual 2003 - 2005 Honda AccordBF29024-S3 | 2003-05 Accord 2.4 manual (A04 example 2003-04) | $840Lowest | Maker ↗ |
![]() | Manual 2006 - 2007 Honda AccordBF29026-S3 | 2006-07 Accord 2.4 manual | $1,200 | Maker ↗ |
| Wire-in | Universal flying lead or re-terminated factory harness | Any engine (terminate to ECU2's two Superseal 34 connectors) | Universal harness from $405 | Maker ↗ |

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 2003 - 2005 Honda Accord
- Plugs into
Honda Accord ECM (K24A4, 7th gen) · 37820-RAA-A04
- OEM part numbers
- 37820-RAA-A04
- ECU
- Honda K-series (RAA)
- Confidence
- low
2005 manual number not confirmed.
Sources: E-1466
- Fits
- 2003-05 Accord 2.4 manual (A04 example 2003-04)
- Exclusions
- RAA-315 is automatic
- SKU
- BF29024-S3
- Maker fitment
- Honda Accord (Manual); selector years 2003-2005; SKU label: Manual 2003 - 2005 Honda Accord
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); Accord 2003-05 only; CR-V/Element not listed

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 2006 - 2007 Honda Accord
- Plugs into
Honda Accord ECM (K24A8, 2006-07)
- ECU
- Honda K-series
- Confidence
- low
Family from maker fitment only.
- Fits
- 2006-07 Accord 2.4 manual
- SKU
- BF29026-S3
- Maker fitment
- Honda Accord (Manual); selector years 2006-2007; SKU label: Manual 2006 - 2007 Honda Accord
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); Accord 2006-07 only
Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.
Your GAINS system for this car · pre-release
ECU2 for the Accord / CR-V / Element
Planned with the same rules as the configurator for this car's 4 cyl · port injection · drive-by-wire. The factory ECU is unplugged and replaced; nothing is written to it.
- Price TBA
ECU2Engine controller
4 cyl · port injection · drive-by-wire
Full sequential fuel and spark for this 4-cylinder, and its electronic throttle, with the wideband built in.
in designEst. availability: April 2027
Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →
Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →
What you get
- A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
- Faults in plain words"Coolant temp sensor open circuit.
- Drive-by-wire built inFour half-bridges run up to two electronic throttles, with pedal and throttle sensors on the ECU's own inputs and a windowed watchdog that cuts the motors in hardware on a fault.
- S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
- Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
- GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.
How it wires in
- Haltech S3 plug-in harnessNone listed for this car
- Factory-connector → S3 adapter2 listed · from $840 USD listBF29024-S3
- Wire-inAlways possible
Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓
ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.
Swap guides
The K24A1 / K24A4 (CR-V / Accord) family in other cars
How GAINS approaches the Accord / CR-V / Element
Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.
- 1Base map and first startplanned
Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.
- 2Lambda targets and VE learningclosed loop on GAINS ECUs
Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.
- 3VTEC crossoverplanned
VTEC engagement is treated as a load and rpm surface where the two cam profiles cross on torque, learned from logs rather than a single fixed rpm.
- 4Cam phasing (VVT)gated
Begin with conservative overlap. Cam targets per load cell are then chosen with torque and knock in mind, keeping idle and cold overlap low for stability. Widening cam authority follows the same evidence-gated path as spark.
- 5Drivability foundationsplanned
Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.
- 6Factory load sensingfactory reference
What the factory ECU measures load with: MAP speed-density (low confidence)
- 7Wideband sensorhardware
the factory sensor is already an A/F type; for tuning, fit a Bosch LSU 4.9 for the GAINS ECU's built-in controller (factory A/F sensors are not LSU-compatible)
- 8Bottom end and head sealingfactory reference
Reported: Stock rods and especially rod bolts are commonly reported as the first bottom-end limit under boost (vendor and forum consensus); some builders also add sleeves or a block guard because the block is open-deck (single forum opinion). (low confidence) Limits depend on tune quality, fuel, rpm and condition and are not guaranteed.
Drivetrain
Chassis integration
The Accord is a large, comfort-oriented chassis. Tuning beyond intake, exhaust and calibration is uncommon, and its main enthusiast role is as a K24 and transmission donor.
Tuning notes
The K24A4's 9.7:1 compression is attractive for low-boost turbo builds on pump fuel, and its long stroke makes it a common short block for K20-head hybrids. Expect VTC actuator and cold-start rattle diagnosis on high-mileage examples; see the K-series weak points.
Popular swaps
GAINS on the Accord / CR-V / Element
ECU2
Designed so your phone is the laptop, keypad and dash
The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.
Wideband, IMU and logging built in
An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.
Modular, so you buy what the engine needs
This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.
Calibration that keeps learning
Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.
Adaptive tuning strategies
- VE learning closed loop on GAINS ECUs
Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.
- Goal-based lambda targets closed loop on GAINS ECUs
Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.
- Knock protection protection
Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.
- Warm-up, cranking, idle and transient fuel planned
The same learning approach applied to the tables tuners spend hours on after the main map is done.
- Spark advance and boost authority gated
Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.
Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.
GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.
Frequently asked
What engine is in the 2003-2007 Accord 2.4?
In North America, a 2354 cc i-VTEC four commonly coded K24A4, rated at 160 hp with 9.7:1 compression.34
What compression ratio is the K24A4?
9.7:1 per Honda Canada's 2003 Accord press kit.3
Can an Accord K24 transmission be used in a K-swap?
Yes. Hasport mount kits offer versions for the 03-07 Accord manual transmission.2
Is the K24A3 the same as the K24A4?
No. The K24A3 (CL Accord outside North America) is listed at 10.5:1 and about 187 hp, compared with the 9.7:1 160 hp K24A4.4
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- EFK K-Series Mount Kit (88-91 Civic/CRX) · Hasport Performance · vendor-doc · retrieved 2026-10-25
- EGK K-Series Mount Kit (92-95 Civic, 94-01 Integra, Del Sol) · Hasport Performance · vendor-doc · retrieved 2026-10-25
- 2003 Accord Sedan Press Kit · Honda Canada (hondanews.ca) · press · retrieved 2026-10-25
- Honda K engine · Wikipedia · community · retrieved 2026-10-25
Catalog data and evidence
- Catalog data, not yet expert-reviewed.
- No vehicle photos: illustrations only until licensed imagery is available.
- Catalog note: The budget K24 swap block
- E-934 Boomslang identity (sourced, high confidence)
- E-935 Boomslang S3 catalog size (sourced, high confidence)
- E-900 Haltech Nexus S3 catalog (sourced, high confidence)
- E-941 S3 engine harness availability (inferred, medium confidence)
- E-1466 Accord K24 ECM (unverified-secondary, low confidence)


