Honda K-series · 2002-08

K24A4 specs: horsepower, injectors, swaps and sensors

The K24A1 / K24A4 (CR-V / Accord) is a naturally aspirated 2.4 L inline-4 engine from Honda (2002-08) with port fuel injection and coil-on-plug ignition. The factory ECU measures load by MAP speed-density. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low2154

Power: 160 hp @ 5,500 rpm · Torque: 161 lb-ft (218 Nm) @ 4,500 rpm (Honda rating, not a GAINS measurement)Medium2

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2002-08Catalog range across the variants on this page.Researched, unverified
Displacement2.4L2,354 cc from bore × strokeSourced · medium2
Layoutinline-4Researched, unverified
Bore × stroke87 × 99mm3.43 × 3.90 inSourced · medium2
Compression ratio9.7:1Sourced · medium2
Redline6,500rpmSourced · medium2
Aspirationnaturally aspiratedResearched, unverified
Fuel injectionport fuel injectionLow confidence54
BlockaluminiumLow confidence23
Cylinder linerscast iron sleevesWikipedia, uncitedLow confidence23

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

K24A4 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Honda rating)160hp @ 5,500 rpmPrimary = K24A4 2003 Accord 4-cyl per Honda Canada press kit; redline per WikipediaSourced · medium2
Torque (Honda rating)161 lb-ft @ 4,500 rpm218 NmSourced · medium2
Other published ratings

K24A1 (2002-06 CR-V): 160 hp @6000, 162 lb-ft @3600, CR 9.6, redline 6500 (Wikipedia)

Sourced · medium2

K24A4 firing order

K24A4 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleHonda top-feedKeihin/Denso family; maker not confirmedLow confidence54
OEM part numbers16450-RAA-A01listing: Element/CR-V/Accord 2.0/2.4 2003-2011Low confidence54
ImpedancehighsaturatedLow confidence54
ConnectorHonda OBD2 / K-seriesLow confidence54
LengthshortLow confidence54
FeedtopLow confidence54
O-ring OD (top / bottom)14/ 14 mmLow confidence54

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
Fuel Injector Clinic FIC 445cc High-Z set · is116-0445hMedium10445 cc/min at 43.5 psi (3 bar), CF-16B fluid 90 F (maker)Needs adapter USCAR-to-Honda OBD2 plug adapters PADPUtoH4 (optional) or solder-in pigtails PGTUSC4 (included)
Fuel Injector Clinic FIC 650cc High-Z set · is116-0650hMedium9650 cc/min at 43.5 psi (3 bar), CF-16B fluid 90 F (maker)Needs adapter USCAR-to-Honda OBD2 plug adapters PADPUtoH4 (optional) or solder-in pigtails PGTUSC4 (included)

K24A4 swap

Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.

K-Swap Acura Integra DC2 (1994-2001)A K-swap Integra DC2 is a common, kit-supported swap: the 1994-2001 Integra shares its K-series mount kit with the EG Civic and Del Sol.Recommends the K24A4 · difficulty 2/5K Swap EG Civic (1992-95)A K-swap EG Civic is one of the most common Honda engine swaps, backed by bolt-in mounts, axles, shifters and hoses made for the 1992-95 chassis.Recommends the K24A4 · difficulty 2/5K Swap EK Civic (1996-2000)A K-swap EK Civic is a common, well-supported Honda swap, but the popular mount kit needs the 1996-2000 car's front subframe, steering rack and lower arms replaced with EG or DC2 Integra parts.Recommends the K24A4 · difficulty 3/5K24 + BMW M DCT swap guideA K24 with a BMW M DCT (Getrag GS7D36SG) in an S2000 is a proven but advanced swap, best known from time-attack cars.Recommends the K24A4 · difficulty 4/5CRX K Swap and Civic EF (1988-91)A CRX K swap, or a K swap in the 1988-91 EF Civic, is a well-supported swap, with bolt-in mounts, axles, shifters and conversion harnesses made for the 1988-91 chassis.Honda K-series swap · difficulty 3/5Honda Fit K-Swap (GD, GE, GK 2007-2020)A K-swap Honda Fit is a well-supported transverse swap: Hasport makes bolt-in mounts for the GD, GE and GK, and Fit-specific axles, shifter cables and jumper harnesses exist.Honda K-series swap · difficulty 4/5K-Swap Mazda Miata NA (1990-97)A K-swap Miata is a well-established swap with complete kits that turn a transverse Honda K-series into a longitudinal, rear-drive layout in the 1990-97 NA.Honda K-series swap · difficulty 3/5Mini Cooper K-Swap (R50/R53 2002-06, R56 2007-13)A Mini Cooper K-swap is a niche but kit-supported transverse swap: RPT Creations sells billet mount kits with a tucked harness for the 2002-06 R50/R53 and the 2007-13 R55-R59.Honda K-series swap · difficulty 4/5Subaru BRZ / Scion FR-S / Toyota 86 K Swap (2013-2020)A K swap BRZ, FR-S or 86 is a growing swap with one complete kit: KPower's K24 package keeps the factory 6-speed through a thick adapter plate, moves the engine low and back, and plugs into the chassis harness.Honda K-series swap · difficulty 3/5Toyota MR2 K Swap (Spyder 2000-07 and SW20 1991-99)A K swap MR2 is a well-supported Spyder (2000-05 US) swap and a smaller, kit-based SW20 one.Honda K-series swap · difficulty 3/5

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
KnockHonda 30530-PPL-A01 (replaces 30530-PNA-003)Sourced7knock sensorUS Accord 2003-07 4-cyl; CR-V to 2009; Element 2003-11
MAPHonda 37830-PNC-003Sourced · medium6MAP sensorUS Accord 2004-07; CR-V 2005-06 (page description)2002-04 CR-V MAP not checked.
MAFNot yet sourcedSourced · medium6none listed in OEM catalogue (speed-density, MAP-based)
O2 (upstream)Honda 36531-PPA-305 (replaces 36531-PPA-A01)Cross-ref: Denso 234-9005 (retail listing: CR-V 2002-04)Sourced78air-fuel ratio sensor (front)US 2004 CR-V EX/LX
O2 (downstream)Honda 36532-PPA-A01Sourced · medium7oxygen sensor (middle/rear)US 2004 CR-V

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Valve timingi-VTECeconomy VTEC + VTCResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAP speed-density. No CR-V/Accord-specific OEM source read; inferred from TSX (same K24A family). Treat as inference.Low1

Factory oxygen sensors

Upstream: wideband A/F upstream (inferred from K24A2/TSX and K-series practice) (1). Downstream O2 sensors: yes. Closed-loop fuelling: A/F-sensor closed loop part load; open loop high load.Low1

Injector drive

Factory injector impedance: high (saturated). Connector: Honda OBD2 / K-series.Low54

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

Stock rods and especially rod bolts are commonly reported as the first bottom-end limit under boost (vendor and forum consensus); some builders also add sleeves or a block guard because the block is open-deck (single forum opinion).Low23

Common first upgrades (reported)

Builders most often report upgrading: forged rods with upgraded bolts (vendor/forum).Low23

Valvetrain, factory engine management and weak points across every generation are on the Honda K-series guide.

Vehicles with the K24A1 / K24A4 (CR-V / Accord)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

10 sources
  1. Honda K24A2 sensing (E-826) · hondanews.com · oem · retrieved 2026-10-25
  2. Honda K-series internals (E-1035) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Honda K-series limits (E-1036) · hybrid-racing.com · vendor-doc · retrieved 2026-10-25
  4. Injectors / FIC Honda sets (E-1234) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  5. Injectors / K-series OEM PNs (E-1242) · fridayparts.com · vendor-doc · retrieved 2026-10-25
  6. OEM sensor PNs (Honda) (E-1350) · hondapartsnow.com · vendor-doc · retrieved 2026-10-25
  7. OEM sensor PNs (Honda K24 CR-V/Accord) (E-1359) · hondapartsnow.com · vendor-doc · retrieved 2026-10-25
  8. Aftermarket cross (Denso) (E-1361) · partcatalog.com · reference · retrieved 2026-10-25
  9. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  10. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.