Part of the Honda K-series family. JDM / import
Modeled power and torque
Modelled estimate, not a dyno result.
Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.
Stock is anchored to the factory rating (217 hp at 8000 rpm, 152 lb-ft at 7000 rpm); the curve shape between peaks is modeled. Intake + exhaust + tune (pump fuel): Typical NA gains come mostly above mid-rpm.
K20A (JDM Type R DC5 / FD2 / FN2) data
- Load sensing
- MAP speed-density
- O2 sensor
- Not yet sourced
- Closed loop
- Not yet sourced
- Block
- aluminium
- Rods / pistons
- higher-tensile rods; rod bolts hand-torqued and micrometer-checked (Wikipedia citing asia.vtec.net, enthusiast) · high-compression pistons (Wikipedia)
- Reported limit
- Very wide spread: rod vendor (Hybrid Racing) says ~250-300 whp on stock rods; forum reports of ~550-600 whp on stock K24 bottom ends (forum anecdote, low confidence)
- Factory
- Honda top-feed (Keihin/Denso family; maker not confirmed)
- Impedance
- high (saturated)
- Direct-fit upgrades
- 2 maker-listed
- Knock
- Honda 30530-PRB-A01 (DC5/EP3) | Honda 30530-PRC-003 (FD2, per retail listing)
- MAP / MAF
- not found
- O2 (upstream)
- not found
Factory ECU
From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.
- ECU family
- Honda 37820-PRB (Type S) / 37820-PND (base) family
- Applies to
- Integra DC5 / RSX 2005-06; manual
- Not for
- automatic; multiplexed gauge/AC request features unsupported
Facelift 05-06 part numbers not confirmed; see for 02-04 family.
- ECU family
- Honda 37820-PRB / PND / PRC family
- Applies to
- Civic EP3 2002-05; Integra DC5 / RSX 2002-04; manual
- Not for
- automatic; 05-06 RSX (use HT-186342)
PRB = RSX Type S K20A2 6MT; PND-A53 = 02-04 RSX base; JDM DC5 Type R uses 37820-PRC. EP3 part number not found.
- ECU family
- Honda K-series (PRB)
- Applies to
- 2002-04 RSX (Type-S K20A2 examples), 2002-05 Civic Si; manual
- Not for
- Base RSX (K20A3) and Civic Si use different codes - confirm
Numbers are Type-S examples from used-parts listings.
Factory ECU pinout: pending
No OEM pin table is in our library yet for the K20A (JDM Type R DC5 / FD2 / FN2) factory ECU. We only publish pinouts drawn from the OEM service manual or the maker's own documents, and none has been sourced yet. Until then, wire from the harness maker's instructions or the factory service manual.
Plug-and-play harness
A plug-in harness built for the Haltech Nexus S3 pinout is listed for this vehicle. The ECU2 follows that published pinout, so the factory ECU is unplugged and the ECU2 plugs into the car's own loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.
| Maker | Harness | Fits | Link | |
|---|---|---|---|---|
| Nexus S2/S3 Plug n Play Adapter Harness Honda DC5HT-186342 | Integra DC5 / RSX 2005-06; manual | $495Lowest | Maker ↗ | |
| Nexus S2/S3 Plug n Play Adapter Harness Honda EP3HT-186343 | Civic EP3 2002-05; Integra DC5 / RSX 2002-04; manual | $535 | Maker ↗ | |
![]() | Manual 2002 - 2004 Acura RSXBF29008-S3 | 2002-04 RSX (Type-S K20A2 examples), 2002-05 Civic Si; manual | $840 | Maker ↗ |
| Wire-in | Universal flying lead or re-terminated factory harness | Any engine (terminate to ECU2's two Superseal 34 connectors) | Universal harness from $405 | Maker ↗ |
Nexus S2/S3 Plug n Play Adapter Harness Honda DC5
- Plugs into
Honda K20 ECU (2005-06 RSX / DC5 facelift)
- ECU
- Honda 37820-PRB (Type S) / 37820-PND (base) family
- Confidence
- low
Facelift 05-06 part numbers not confirmed; see E-1450 for 02-04 family.
Sources: E-1450
- Fits
- Integra DC5 / RSX 2005-06; manual
- Exclusions
- automatic; multiplexed gauge/AC request features unsupported
- SKU
- HT-186342
- Maker fitment
- Honda Integra DC5 / Acura RSX 05-06; manual only; no factory multiplexed coolant gauge, battery light or AC request
- Maker notes
- (search snippet); kit HT-213301
Nexus S2/S3 Plug n Play Adapter Harness Honda EP3
- Plugs into
Honda K20 ECU (EP3 02-05 / DC5-RSX 02-04) · 37820-PRB-A05, 37820-PRB-A06…
- OEM part numbers
- 37820-PRB-A05, 37820-PRB-A06, 37820-PND-A53
- ECU
- Honda 37820-PRB / PND / PRC family
- Confidence
- low
PRB = RSX Type S K20A2 6MT; PND-A53 = 02-04 RSX base; JDM DC5 Type R uses 37820-PRC. EP3 part number not found.
Sources: E-1450
- Fits
- Civic EP3 2002-05; Integra DC5 / RSX 2002-04; manual
- Exclusions
- automatic; 05-06 RSX (use HT-186342)
- SKU
- HT-186343
- Maker fitment
- Honda Civic EP3 02-05 and Integra DC5 / Acura RSX 02-04; manual only; no multiplexed coolant gauge, battery light or AC request
- Maker notes
- kit HT-213302

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 2002 - 2004 Acura RSX
- Plugs into
Honda K-series ECM (2002-04 RSX / 2002-05 Civic Si EP3) · 37820-PRB-A03, 37820-PRB-A06…
- OEM part numbers
- 37820-PRB-A03, 37820-PRB-A06, 37820-PRB-A08
- ECU
- Honda K-series (PRB)
- Confidence
- low
Numbers are Type-S examples from used-parts listings.
Sources: E-1464
- Fits
- 2002-04 RSX (Type-S K20A2 examples), 2002-05 Civic Si; manual
- Exclusions
- Base RSX (K20A3) and Civic Si use different codes - confirm
- SKU
- BF29008-S3
- Maker fitment
- Acura RSX; Honda Civic (Manual); selector years 2001-2005; SKU label: Manual 2002 - 2004 Acura RSX
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2)
Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.
Your GAINS system for this car · pre-release
ECU2 for the Integra Type R DC5
Planned with the same rules as the configurator for this car's 4 cyl · port injection · cable throttle. The factory ECU is unplugged and replaced; nothing is written to it.

- Price TBA
ECU2Engine controller
4 cyl · port injection · cable throttle
Full sequential fuel and spark for this 4-cylinder on a cable throttle, with the wideband built in.
in designEst. availability: April 2027
Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →
Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →
What you get
- A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
- Faults in plain words"Coolant temp sensor open circuit.
- S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
- Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
- GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.
How it wires in
- Haltech S3 plug-in harness2 listed · from $495 USD listHT-186342
- Factory-connector → S3 adapter1 listed · from $840 USD list
- Wire-inAlways possible
Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓
ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.
Swap guides
The K20A (JDM Type R DC5 / FD2 / FN2) family in other cars
How GAINS approaches the Integra Type R DC5
Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.
- 1Base map and first startplanned
Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.
- 2Lambda targets and VE learningclosed loop on GAINS ECUs
Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.
- 3VTEC crossoverplanned
VTEC engagement is treated as a load and rpm surface where the two cam profiles cross on torque, learned from logs rather than a single fixed rpm.
- 4Cam phasing (VVT)gated
Begin with conservative overlap. Cam targets per load cell are then chosen with torque and knock in mind, keeping idle and cold overlap low for stability. Widening cam authority follows the same evidence-gated path as spark.
- 5Drivability foundationsplanned
Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.
- 6Factory load sensingfactory reference
What the factory ECU measures load with: MAP speed-density (low confidence)
- 7Wideband sensorhardware
factory O2 type not yet sourced; plan on a Bosch LSU 4.9 for the GAINS ECU's built-in controller
- 8Bottom end and head sealingfactory reference
Reported: Stock rods and especially rod bolts are commonly reported as the first bottom-end limit under boost (vendor and forum consensus); some builders also add sleeves or a block guard because the block is open-deck (single forum opinion). (low confidence) Limits depend on tune quality, fuel, rpm and condition and are not guaranteed.
GAINS on the Integra Type R DC5
ECU2
Designed so your phone is the laptop, keypad and dash
The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.
Wideband, IMU and logging built in
An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.
Modular, so you buy what the engine needs
This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.
Calibration that keeps learning
Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.
Adaptive tuning strategies
- VE learning closed loop on GAINS ECUs
Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.
- Goal-based lambda targets closed loop on GAINS ECUs
Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.
- Knock protection protection
Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.
- Warm-up, cranking, idle and transient fuel planned
The same learning approach applied to the tables tuners spend hours on after the main map is done.
- Spark advance and boost authority gated
Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.
Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.
GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.
Catalog data and evidence
- Catalog data, not yet expert-reviewed.
- No vehicle photos: illustrations only until licensed imagery is available.
- Catalog note: JDM / import
- E-922 Haltech S3 adapter harness page (sourced, high confidence)
- E-9304 K-series harness/ECU xref: H5 (sourced, medium confidence)
- E-923 Haltech S3 adapter harness page (sourced, high confidence)
- E-9302 K-series harness/ECU xref: H3 (sourced, medium confidence)
- E-934 Boomslang identity (sourced, high confidence)
- E-935 Boomslang S3 catalog size (sourced, high confidence)
- E-900 Haltech Nexus S3 catalog (sourced, high confidence)
- E-941 S3 engine harness availability (inferred, medium confidence)
- E-1450 Honda K20 RSX ECU (reported, low confidence)
- E-1464 RSX ECM (unverified-secondary, low confidence)



