Boost at altitude calculator: absolute pressure target

To make the same manifold pressure at altitude, the boost gauge must read higher: boost needed = (sea-level boost + 14.7 psi) − local barometric pressure. Enter your sea-level target and altitude to see the boost, pressure ratio and the loss if the controller holds gauge boost.

psi
ft
psi

Leave at 0 to use the standard atmosphere at your altitude.

Result

Boost needed for the same absolute pressure17.17 psi
Absolute manifold pressure target29.40 psi
Pressure ratio at altitude2.40 :1
Pressure ratio at sea level2.00 :1
If gauge boost is held: absolute pressure26.93 psi
If gauge boost is held: change in manifold pressure-8.4 %
Barometric pressure used12.23 psi

The turbo runs a higher pressure ratio and shaft speed at altitude; check the compressor map before raising boost.

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

P_abs = boost(sea level) + 14.696;  boost(alt) = P_abs − P_baro(alt);  PR = P_abs ÷ P_baro;  P_baro(std) = 14.696 × (1 − 6.8754×10⁻⁶ × ft)^5.2559 psia
  1. Engine airflow depends on absolute manifold pressure (and temperature), not on what the boost gauge reads.
  2. Add standard sea-level pressure to the sea-level boost target to get the absolute target.
  3. Subtract the barometric pressure at your altitude to get the gauge boost that reaches the same absolute pressure.
  4. Divide the absolute target by barometric pressure for the pressure ratio the compressor must make.

Worked example

Inputs

Boost target at sea level (gauge)
14.7 psi
Altitude
5000 ft
Measured barometric pressure (optional)
0 psi

Result

Boost needed for the same absolute pressure17.17psi
Absolute manifold pressure target29.40psi
Pressure ratio at altitude2.40:1
Pressure ratio at sea level2.00:1
If gauge boost is held: absolute pressure26.93psi
If gauge boost is held: change in manifold pressure-8.4%
Barometric pressure used12.23psi

Assumptions and limits

  • Standard atmosphere unless you enter measured barometric pressure.
  • Excludes filter and intercooler losses and the change in charge temperature at the higher pressure ratio.
  • A controller that targets absolute pressure (MAP) compensates automatically; one that targets gauge pressure does not.

Related terms

Frequently asked

Do I need more boost at altitude?

To make the same manifold pressure, yes. The engine responds to absolute pressure. At 5,000 ft barometric pressure is about 12.2 psia, so 14.7 psi of sea-level boost (29.4 psia) needs about 17.2 psi on the gauge.

Why does my turbo car lose power at altitude?

If the boost controller holds gauge pressure, absolute manifold pressure falls with barometric pressure. At 5,000 ft, holding 14.7 psi gauge gives about 26.9 psia instead of 29.4, about 8% less air before temperature effects.

Is it safe to run more boost at altitude?

Holding the same absolute pressure means a higher pressure ratio, so the compressor spins faster and runs hotter. Check the operating point on the compressor map and watch for overspeed before raising the target.

Answers draw on the sources below.

Sources

  1. U.S. Standard Atmosphere, 1976 · NOAA / NASA / USAF · retrieved 2026-10-27
  2. Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018

Spot an error? Tell us.