Boost pressure converter: psig to psia, bar and kPa

Absolute pressure = boost (gauge) + barometric pressure, and pressure ratio = absolute ÷ barometric. Enter boost or a MAP reading in psi, bar or kPa with your altitude to convert between gauge, absolute and ratio.

psi
ft
psi

Leave at 0 to use the standard atmosphere at your altitude.

Result

Absolute pressure29.40 psi
Gauge pressure (boost)14.70 psi
Pressure ratio to ambient2.00 :1
Barometric pressure used14.70 psi

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

P_abs = P_gauge + P_baro;  PR = P_abs ÷ P_baro;  P_baro(std) = 14.696 × (1 − 6.8754×10⁻⁶ × ft)^5.2559 psia
  1. A boost gauge reads pressure above the surrounding air; a MAP sensor reads absolute pressure.
  2. Add or subtract barometric pressure to convert; at altitude the barometric pressure is lower, so the same boost is a lower absolute pressure.
  3. The ratio of absolute to barometric pressure is the pressure ratio before intake and intercooler losses.

Worked example

Inputs

Pressure reading
14.7 psi
Reading is
0
Altitude
0 ft
Measured barometric pressure (optional)
0 psi

Result

Absolute pressure29.40psi
Gauge pressure (boost)14.70psi
Pressure ratio to ambient2.00:1
Barometric pressure used14.70psi

Assumptions and limits

  • Standard atmosphere unless you enter measured barometric pressure.
  • Pressure ratio excludes filter and intercooler losses; the turbo pressure ratio calculator includes them.

Related terms

Frequently asked

How do I convert boost psi to absolute pressure?

Add barometric pressure. At sea level, 14.7 psi of boost is about 29.4 psia (about 203 kPa absolute). At 5,000 ft, where barometric pressure is about 12.2 psia, the same 14.7 psi of boost is only about 26.9 psia.

What is the difference between psig and psia?

Psig (gauge) is pressure above the surrounding atmosphere, which is what a boost gauge shows. Psia (absolute) is pressure above a perfect vacuum, which is what a MAP sensor and the ECU's fuel and load tables use.

Why does the same boost need a higher pressure ratio at altitude?

Pressure ratio is absolute outlet pressure divided by inlet pressure. Inlet pressure falls with altitude, so the turbo must compress more to reach the same gauge boost: 14.7 psi of boost is a ratio of 2.0 at sea level but about 2.2 at 5,000 ft.

Answers draw on the sources below.

Sources

  1. U.S. Standard Atmosphere, 1976 · NOAA / NASA / USAF
  2. Turbo Tech 103: Expert compressor matching · Garrett Motion

Spot an error? Tell us.