Turbo compressor outlet temperature calculator

Compressor outlet temperature = T_in + T_in × (PR^0.286 − 1) ÷ compressor efficiency, using absolute temperatures. Enter inlet air temperature, pressure ratio and efficiency from the compressor map to estimate how hot the charge is before the intercooler.

°F
:1

Absolute outlet ÷ absolute inlet pressure. Use the turbo pressure ratio calculator if you know boost instead.

%

Read it from the compressor map island at your operating point; 65-78% is typical of modern compressors.

Result

Compressor outlet temperature238 °F
Temperature rise158 °F
Ideal (isentropic) outlet temperature198 °F
Charge density vs inlet air1.55 :1before any intercooling

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

T₂ = T₁ + T₁ × (PR^((γ−1)/γ) − 1) ÷ η_c;  (γ−1)/γ = 0.2857 for air (γ = 1.4); temperatures absolute
  1. An ideal (isentropic) compressor raises absolute temperature by the factor PR^0.2857.
  2. A real compressor does more work for the same pressure ratio, so the rise is the ideal rise divided by the isentropic efficiency.
  3. Density after the compressor is PR × T_in ÷ T_out times inlet density, which shows why intercooling pays off.

Worked example

Inputs

Compressor inlet air temperature
80 °F
Pressure ratio
2 :1
Compressor efficiency
75 %

Result

Compressor outlet temperature238°F
Temperature rise158°F
Ideal (isentropic) outlet temperature198°F
Charge density vs inlet air1.55:1

Assumptions and limits

  • Air as an ideal gas with γ = 1.4.
  • Pressure ratio total-to-total and efficiency from the same map; maps quoting total-to-static values differ slightly.
  • No heat transfer to or from the compressor housing.

Related terms

Frequently asked

How hot does air get after a turbo compressor?

It depends on pressure ratio and compressor efficiency. At 80 °F inlet, a pressure ratio of 2.0 and 75% efficiency, the outlet is about 238 °F. At a pressure ratio of 3.0 and 70% efficiency from 77 °F, it is about 360 °F.

Why use compressor efficiency in the outlet temperature formula?

The isentropic formula gives the minimum temperature rise for a pressure ratio. A real compressor wastes some work as heat, so the actual rise is the ideal rise divided by the efficiency read from the compressor map at that operating point.

Do I need absolute temperature for compressor outlet temperature?

Yes. The relation T₂ = T₁ × PR^0.286 only works in absolute units (Rankine or kelvin). Convert, apply the formula, then convert back to °F or °C. The calculator does this for you.

Answers draw on the sources below.

Sources

  1. Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018
  2. Gas Turbine Theory (7th ed.): compressor isentropic efficiency · Saravanamuttoo, Rogers, Cohen, Straznicky, Stewart, Pearson
  3. Turbo Tech 103: Expert compressor matching · Garrett Motion

Spot an error? Tell us.