BSFC calculator

Horsepower = fuel flow (lb/hr) ÷ BSFC (lb/hp·hr), and fuel flow = horsepower × BSFC. Enter measured or injector-limited fuel flow to estimate the power it supports, or a power target to get the fuel it needs.

lb/hr
:1

Typical: gasoline NA 0.45-0.50, gasoline boosted 0.55-0.65, E85 NA 0.65-0.75, E85 boosted 0.80-0.90 lb/hp-hr.

hp

Result

Crank power supported500 hp
BSFC (g/kWh)365

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

hp = ṁ_fuel (lb/hr) ÷ BSFC;  ṁ_fuel = hp × BSFC;  1 lb/(hp·hr) = 608.3 g/(kW·h)
  1. Brake specific fuel consumption (BSFC) is fuel mass flow per unit of brake power.
  2. Divide fuel flow by BSFC for power, or multiply power by BSFC for fuel flow.
  3. The SI form converts pounds to grams (453.59) and horsepower to kilowatts (0.7457).

Worked example

Inputs

Fuel mass flow
300 lb/hr
BSFC
0.6 :1
Power target (optional, for fuel needed)
0 hp

Result

Crank power supported500hp
BSFC (g/kWh)365

Assumptions and limits

  • BSFC is an estimate at full load; it changes with fuel, mixture, ignition timing and engine efficiency.
  • Crank (brake) power, not wheel power.
  • Planning estimate, not a dyno result.

Related terms

Frequently asked

How do you calculate horsepower from fuel flow?

Divide fuel mass flow by BSFC: hp = lb/hr ÷ BSFC. 300 lb/hr of gasoline in a boosted engine at a BSFC of 0.60 supports about 500 crank horsepower. Use an E85 BSFC for E85, since it needs much more fuel per horsepower.

What is a typical BSFC?

Rough planning values in lb/hp·hr: gasoline naturally aspirated 0.45-0.50, gasoline boosted 0.55-0.65, E85 naturally aspirated 0.65-0.75 and E85 boosted 0.80-0.90. Real values depend on the engine, mixture and timing.

How do I convert BSFC from lb/hp·hr to g/kWh?

Multiply by about 608.3. A BSFC of 0.50 lb/hp·hr is about 304 g/kWh, and 0.60 is about 365 g/kWh. Divide g/kWh by 608.3 to go the other way.

Answers draw on the sources below.

Sources

  1. Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018
  2. 2.61 Internal Combustion Engines (lecture notes: engine geometry, performance parameters, specific fuel consumption) · MIT OpenCourseWare
  3. Automotive Handbook · Robert Bosch GmbH

Spot an error? Tell us.