Power to weight ratio calculator
Power-to-weight ratio = power ÷ weight, usually quoted as horsepower per ton or tonne, or inverted as pounds per horsepower. Enter power and weight to compare cars in every common unit.
Result
Planning estimate from the formula below, not a measurement.
How it works
The formula, the method step by step, then a worked example.
hp per tonne = hp ÷ (kg ÷ 1000); lb per hp = lb ÷ hp; W/kg = (hp × 745.7) ÷ kg
- Divide power by weight; the inverse (weight per unit power) is the same comparison turned around.
- Conversions use 1 hp = 745.7 W and 1 lb = 0.4536 kg (NIST SP 811).
Worked example
Inputs
- Power
- 300 hp
- Weight
- 3200 lb
Result
Assumptions and limits
- Compare like with like: crank or wheel power, and curb or race weight, change the ratio.
- The ratio predicts acceleration only roughly; gearing, traction and aerodynamics matter too.
Related terms
Frequently asked
How do you calculate power to weight ratio?
Divide power by weight. A 300 hp car weighing 3,200 lb has about 206 hp per tonne, or 10.7 lb per hp. Use the same basis, crank or wheel power and curb or race weight, when you compare cars.
Is lb per hp the same as power to weight ratio?
It is the inverse: weight divided by power. Lower lb per hp means a better power-to-weight ratio. Both describe the same comparison.
How does power to weight relate to quarter-mile times?
Empirical drag-strip relations, such as Hale's, predict trap speed in proportion to the cube root of power ÷ weight. The 1/4 mile calculator turns a power-to-weight figure into estimated ET and trap speed.
Answers draw on the sources below.
Sources
- NIST Special Publication 811: Guide for the Use of the International System of Units (conversion factors: horsepower, pound) · National Institute of Standards and Technology · retrieved 2026-10-27
- SAE J1349: Engine Power Test Code - Spark Ignition and Compression Ignition - As Installed Net Power Rating · SAE International · retrieved 2026-10-27
Spot an error? Tell us.

