TE Connectivity (AMP) · TE Superseal 1.0

4-1437290-0: Superseal 1.0 34-way plug housing, Key 1

3900113-3421Superseal 1.0 34-way plug, Key 1

4-1437290-0 is TE's black 34-way Superseal 1.0 plug housing with coding Key 1. It holds 34 size 1.0 mm socket contacts in four rows on a 3.0 mm pitch and mates with Key 1 pin headers such as 6437288-1. TE rates the housing at 250 V and -40 to 125 °C, with immersion sealing per JIS D0203.134

34-wayPlug, socket contacts
6437288-1Mates with
IntegralWedge / secondary lock
Up to 15 ACurrent
0.5-1.25 mm²Wire range

4-1437290-0 cavity layout

latch12345678910111213141516171819202122232425262728293031323334
Latch up. Rows of 9, 8, 8 and 9 on a 3.0 mm pitch; rows 2 and 3 offset half a pitch. Key 1 coding rib not drawn. The mating face is the wire-side grid mirrored left to right (latch still up), derived by us. Drawn from the cavity numbers; not to scale.

Medium3 Numbering from the numbered end view on sheet 3 of TE drawing 2-1437285-3 (rev P), stored as the wire side. Row spacing on the drawing is 3.5, 4 and 3.5 mm. The drawing does not show where the coding key sits, so it is not drawn here.

Contact size
  • 1.0 mm socket contacts
  • 1.0 mm mating pin0.039 in
Sourced1
Width38.2mm1.504 inSourced13
Height34.55mm1.36 inReference dimension on the drawing.Sourced13
Length (depth)32.15mm1.266 inReference dimension on the drawing.Sourced13
Tolerance±0.3 mm unless statedSourced3

CAD and drawings

We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.

Complete kit by wire size

Everything to terminate one 4-1437290-0: pick the terminal for your wire size and plating. Lines marked Unverified or TBC need checking against the maker's current drawing before you order.

20 AWG (0.5 mm²) · Gold interface, tin crimp area · stamped
ItemPart numberDescriptionQtySource
Housing4-1437290-034-way plug1134
Terminal3-1447221-4socket, stamped and formed, double spring, F-crimp, Gold interface, tin crimp areaTE lists 6 A typical and insulation diameter 1.6-1.9 mm; the TE catalog table gives 1.6-2.2 mm.34 (1 per wire)64
SealNone (no separate wire seal)The 34-way plug is supplied as a sealed housing assembly; TE's parts list and instruction sheet list only contacts, housings and the hole plug, so no single-wire seals are boughtInferred from the parts lists (no seal part exists) plus 'do not dismantle the housing'. Neither document uses the words family seal or mat seal.0Medium910
Cavity plug4-1437284-3Cavity sealing plug (fills an unused cavity)Both sources give the same part number for Superseal 1.0. The TE catalog says white; the TE product page says natural polyacetal (POM).per unused cavitySources disagreeMedium47
Crimp tool1454509-1Straight-action hand tool, Super Seal receptacle (alias 3800088-01)TE marks it superseded and not currently available; no replacement named. 114-78016 lists hand-tool applicators 1463173-2 / 1463174-2 for the AMP-O-Lectric terminator.113
Crimp tool2151705-1OCEAN end-feed applicator, mechanical feed (production crimping) (small wire barrel, 0.5 mm² contact 3-1447221-4)TE 114-78011 assigns 2151705-1 to the small barrel; production crimping only.1 (production)4
Crimp tool2151705-2OCEAN end-feed applicator, pneumatic feed (production crimping)Pneumatic version of 2151705-1; confirm the barrel size against TE 114-78011 before use (TBC).1 (production)4
Removal toolNone requiredContacts come out by pulling the wire once the final lock is released; a small flat-blade screwdriver can lift the lock1Medium10
16-18 AWG (0.75-1.25 mm²) · Gold interface, tin crimp area · stamped
ItemPart numberDescriptionQtySource
Housing4-1437290-034-way plug1134
Terminal3-1447221-3socket, stamped and formed, double spring, F-crimp, Gold interface, tin crimp areaTE lists 15 A typical and insulation diameter 1.6-2.2 mm. Insulation over 1.9 mm only fits the eight outer positions (see specs).34 (1 per wire)54
SealNone (no separate wire seal)The 34-way plug is supplied as a sealed housing assembly; TE's parts list and instruction sheet list only contacts, housings and the hole plug, so no single-wire seals are boughtInferred from the parts lists (no seal part exists) plus 'do not dismantle the housing'. Neither document uses the words family seal or mat seal.0Medium910
Cavity plug4-1437284-3Cavity sealing plug (fills an unused cavity)Both sources give the same part number for Superseal 1.0. The TE catalog says white; the TE product page says natural polyacetal (POM).per unused cavitySources disagreeMedium47
Crimp tool2151241-1OCEAN applicator for 3-1447221-3 / 2461132-1 / 1-2461132-1114-78011 lists 2151705-1 for the small-barrel 0.5 mm² contacts only, while the existing data lists 2151705-1/-2 for both contacts; treat 2151241-1 as the normal-barrel applicator.18
Crimp tool1454509-1Straight-action hand tool, Super Seal receptacle (alias 3800088-01)TE marks it superseded and not currently available; no replacement named. 114-78016 lists hand-tool applicators 1463173-2 / 1463174-2 for the AMP-O-Lectric terminator.113
Removal toolNone requiredContacts come out by pulling the wire once the final lock is released; a small flat-blade screwdriver can lift the lock1Medium10

Mating part and wedge

Mates with6437288-1 34Key 1 34-way headers listed for this plug: 6437288-1 and 1437288-1 (upper lock), 2-6437285-5 and 2-1437285-5 (lower lock), 2-6447232-3 and 2-1447232-3 (vertical). It also fits Key 1 60-way headers 6437288-3 / 6437288-5 next to a 26-way plug.
Wedge lockIntegral lock (no separate wedge)
Cavity sealing plug (fills an unused cavity)4-1437284-3 Sources disagreeMedium47Both sources give the same part number for Superseal 1.0. The TE catalog says white; the TE product page says natural polyacetal (POM).

Contacts by wire size and plating

Part numberTypeWirePlatingSource
3-1447221-4socket, stamped and formed, double spring, F-crimp20 AWG (0.5 mm²)Gold interface, tin crimp area64TE lists 6 A typical and insulation diameter 1.6-1.9 mm; the TE catalog table gives 1.6-2.2 mm.
3-1447221-3socket, stamped and formed, double spring, F-crimp16-18 AWG (0.75-1.25 mm²)Gold interface, tin crimp area54TE lists 15 A typical and insulation diameter 1.6-2.2 mm. Insulation over 1.9 mm only fits the eight outer positions (see specs).

Ratings and specifications

Contact size
  • 1.0 mm socket contacts
  • 1.0 mm mating pin0.039 in
Sourced1
Insulation OD by position
  • 1.6-1.9 mm in every positionAVSS 0.5-0.85 mm²
  • 2.0-2.2 mm (AVSS 1.25 mm²) only in positions 1, 9, 10, 17, 18, 25, 26 and 34
Sourced3
Wire range0.5-1.25 mm², set by the contact20-16 AWGSourced65
Current rating
  • Up to 15 A per contact3-1447221-3
  • 6 A typical for the 0.5 mm² contact 3-1447221-4
TE's housing page gives no current rating; the catalog says to consult product specification 108-78140.Sourced456
Operating voltage250V AC/DCSourced14
Temperature-40 to 125°C-40 to 257 °FSourced1
Sealing
  • Sealable
  • Immersion tested per JIS D0203TE gives no IP code
  • Silicone family seal and red-brown silicone seal ring
Sourced143
Housing
  • Glass-filled PBT, black, UL 94V-2
  • White final lock
Sourced13
Pitch
  • 3.0 mm0.118 in
  • Rows 3.5, 4 and 3.5 mm apart
Sourced13
CodingKey 1Sourced14
Specifications
  • Product spec 108-78140
  • Application specs 114-78011 and 114-78013
  • Instruction sheet 411-78017
Sourced31

Crimp and removal tools

JobPart numberTool
crimp1454509-1CERTI-CRIMP straight-action hand tool for 3-1447221-3 and 3-1447221-4 Medium4From TE's Superseal 1.0 catalog section. Check TE for a current replacement before ordering.

How to choose and check a crimp tool →

Crimp and assembly quick card

Shared by every TE Superseal 1.0 housing: the values belong to the contacts, not the housing.

Strip length3.5mm +1.0/-0reference valueSourced8
Crimp height
  • Wire barrel: 0.5 mm² 0.90 ±0.05 mm (width 1.60 ±0.1, 3-1447221-4)
  • 0.75 mm² 1.00 ±0.05
  • 0.85 mm² 1.05 ±0.05
  • 1.0 mm² 1.10 ±0.05
  • 1.25 mm² 1.20 ±0.05 mm (width 1.85 ±0.1, 3-1447221-3). Insulation barrel: 2.2 mm max height / 2.3 mm max width up to 0.85 mm²
  • 2.5 / 2.6 mm max for 1.0-1.25 mm²
Sourced8
Pull-out force (minimum)
  • 0.5 mm²: 88.2 N min9 kgf
  • 0.75 mm² AVSSX/AESSX: 117.6 N12 kgf
  • 0.85 mm²: 127.4 N13 kgf
  • 1.0 mm² ISO 19642-3 thin wall: 147 N15 kgf
  • 1.25 mm²: 176.4 N18 kgf
114-78016 gives lower minimums (50 / 90 / 110 N) for the specific ACW0219 cable; use the figure for your wire type.Sourced89
Application spec
  • 114-78011 rev A125 Mar 2025
  • 114-78016 rev A covers ACW0219 wire only
Sourced812

Assembly

  1. Strip about 3.5 mm (up to 4.5 mm) without nicking strands or scarring the insulation.8
  2. Crimp with the TE applicator for the contact (2151241-1 for 3-1447221-3, 2151705-1 for 3-1447221-4) and check wire- and insulation-barrel height against 114-78011.8
  3. Check the crimp: conductor protrudes 0.3-0.8 mm past the wire barrel, bell-mouth 0.2-0.4 mm, seam closed, bend and twist within 3° (rolling 6°).8
  4. Hold the contact near the crimp and push it straight into the wire side of the plug until it bottoms; a deformed contact must be scrapped and a new one crimped.10
  5. Check every contact from the mating face and the wire face, and fit hole plug 4-1437284-3 in unused cavities.109
  6. Press both final-lock protrusions in together with your fingers until they latch; if they stop part way a contact is not fully home, so recheck it rather than forcing the lock.10
  7. Route wires so no single wire is under tension; make any 90° bend about 20 mm from the connector.10

Removal

  1. Release the final lock by lifting its release side with a fingernail or small flat-blade screwdriver until it clicks out; TE limits this to 10 releases.10
  2. Confirm both final-lock protrusions stand proud, then pull the wire straight back out of the housing; TE limits removal of one position to 3 times.10
  3. TE's instruction sheet names no dedicated extraction tool for Superseal 1.0.Medium10

Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →

Where it's used

Our harness designs

  • ECU2 harness (concept) Design, pre-release4-1437290-0 at Connector A: 34-way Key 1 plug. For the ECU2.11

Sensors that mate with it

No sensor in our sensor library lists this connector yet.

Factory (OEM) use

No factory ECU in our pinout library uses this connector family.

Commonly used for

Assembly notes

The housing has an integrated white final lock that acts as the terminal position assurance.

Seat every contact before closing it; a lock that will not close points to a contact that is not fully home.Medium31

Only positions 1, 9, 10, 17, 18, 25, 26 and 34 accept 1.25 mm² wire with 2.0-2.2 mm insulation. Plan power and ground on those corners and run 0.5-0.85 mm² wire everywhere else.3

Key 1 and Key 2 plugs look alike. Check the full part number on the bag or housing, because a Key 2 plug will not enter a Key 1 header.Medium41

Frequently asked

What header mates with 4-1437290-0?

4-1437290-0 mates with Key 1 Superseal 1.0 34-way pin headers. TE lists 6437288-1 and 1437288-1 with an upper lock, 2-6437285-5 and 2-1437285-5 with a lower lock, and 2-6447232-3 and 2-1447232-3 as vertical headers. It also fits a Key 1 60-way header beside a 26-way plug.34

What is the difference between 4-1437290-0 and 4-1437290-1?

Only the coding key differs. 4-1437290-0 is Key 1 and 4-1437290-1 is Key 2; both are 34-way, black, 3.0 mm pitch plugs with the same contacts and dimensions. Two keys let one module carry two 34-way headers side by side without the harness plugs being swapped.124

Which terminals fit 4-1437290-0?

It takes Superseal 1.0 stamped receptacles. Use 3-1447221-4 for 0.5 mm² (20 AWG) wire and 3-1447221-3 for 0.75-1.25 mm² (18-16 AWG) wire. Both have a gold contact area over a tin crimp area. TE lists 6 A typical for the smaller contact and 15 A typical for the larger.654

Do Superseal 34-way plugs need individual wire seals?

No. The Superseal 1.0 contacts are listed by TE as family-seal parts, so the housing's silicone seal does the sealing around each wire. Fill every unused cavity with the 4-1437284-3 cavity plug instead, or water can enter through the open hole even though every wire is sealed.Medium54

Keep going

Related

Sources

13 sources
  1. 4-1437290-0 product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  2. 4-1437290-1 product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  3. Customer drawing 2-1437285-3 rev P, sheet 3 (Superseal plug housing 34 pos, 4-1437290-0 / -1) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  4. Superseal 1.0 Connectors (TE catalog section, distributor-hosted) · TE Connectivity, hosted by Dalroad · vendor-doc · retrieved 2026-10-27
  5. 3-1447221-3 Superseal 1.0 receptacle product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  6. 3-1447221-4 Superseal 1.0 receptacle product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  7. 4-1437284-3 Superseal 1.0 sealing plug product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  8. Application Specification 114-78011 rev A1 (25 Mar 2025): Super Seal contacts · TE Connectivity · vendor-doc · retrieved 2026-10-28
  9. Product Specification 108-78140 rev A9 (11 Oct 2021): Superseal 1.0 connector · TE Connectivity · vendor-doc · retrieved 2026-10-28
  10. Instruction Sheet 411-78017 rev O (10 Oct 2001): Super Seal plug housing connector · TE Connectivity (Tyco Electronics AMP K.K.) · vendor-doc · retrieved 2026-10-28
  11. internal GAINS internal: GAINS universal harness designs v1: Single Controller and IO Module harness build scripts, connector lists and wire lists (pre-release, not yet built)
  12. Application Specification 114-78016 rev A (17 Oct 2018): Super Seal connector for ACW0219 wire · TE Connectivity · vendor-doc · retrieved 2026-10-28
  13. 1454509-1 straight action hand tool, Super Seal receptacle contact (product page) · TE Connectivity · vendor-doc · retrieved 2026-10-28

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.