TE Connectivity (AMP) · TE Superseal 1.0
4-1437290-1: Superseal 1.0 34-way plug housing, Key 2
4-1437290-1 is TE's black 34-way Superseal 1.0 plug housing with coding Key 2. It holds 34 size 1.0 mm socket contacts in four rows on a 3.0 mm pitch and mates with Key 2 pin headers such as 6437288-2. TE rates the housing at 250 V and -40 to 125 °C, with immersion sealing per JIS D0203.234
4-1437290-1 cavity layout
Medium3 Numbering from the numbered end view on sheet 3 of TE drawing 2-1437285-3 (rev P), stored as the wire side. Row spacing on the drawing is 3.5, 4 and 3.5 mm. The drawing does not show where the coding key sits, so it is not drawn here.
CAD and drawings
- Customer drawingCustomer drawing 2-1437285-3 (34-pos plug housing assy, covers 4-1437290-1) · 2-1437285-32Download from TE Connectivity ↗Registration may be needed
- Application specApplication spec 114-78011 (Super Seal contacts) · 114-780118Download from TE Connectivity ↗No login at last check; the maker may change this
- Application specApplication spec 114-78016 (ACW0219 wire only) · 114-78016Medium12Download from TE Connectivity ↗No login at last check; the maker may change this
- Product specProduct spec 108-78140 (Superseal 1.0 connector) · 108-781409Download from TE Connectivity ↗No login at last check; the maker may change this
- Instruction sheetInstruction sheet 411-78017 (plug housing assembly) · 411-7801710Download from TE Connectivity ↗No login at last check; the maker may change this
- Application specJapanese application spec 114-78013 · 114-78013Medium1Download from TE Connectivity ↗Registration may be needed
We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.
Complete kit by wire size
Everything to terminate one 4-1437290-1: pick the terminal for your wire size and plating. Lines marked Unverified or TBC need checking against the maker's current drawing before you order.
20 AWG (0.5 mm²) · Gold interface, tin crimp area · stamped
| Item | Part number | Description | Qty | Source |
|---|---|---|---|---|
| Housing | 4-1437290-1 | 34-way plug | 1 | 234 |
| Terminal | 3-1447221-4 | socket, stamped and formed, double spring, F-crimp, Gold interface, tin crimp areaTE lists 6 A typical and insulation diameter 1.6-1.9 mm; the TE catalog table gives 1.6-2.2 mm. | 34 (1 per wire) | 64 |
| Seal | None (no separate wire seal) | The 34-way plug is supplied as a sealed housing assembly; TE's parts list and instruction sheet list only contacts, housings and the hole plug, so no single-wire seals are boughtInferred from the parts lists (no seal part exists) plus 'do not dismantle the housing'. Neither document uses the words family seal or mat seal. | 0 | Medium910 |
| Cavity plug | 4-1437284-3 | Cavity sealing plug (fills an unused cavity)Both sources give the same part number for Superseal 1.0. The TE catalog says white; the TE product page says natural polyacetal (POM). | per unused cavity | Sources disagreeMedium47 |
| Crimp tool | 1454509-1 | Straight-action hand tool, Super Seal receptacle (alias 3800088-01)TE marks it superseded and not currently available; no replacement named. 114-78016 lists hand-tool applicators 1463173-2 / 1463174-2 for the AMP-O-Lectric terminator. | 1 | 13 |
| Crimp tool | 2151705-1 | OCEAN end-feed applicator, mechanical feed (production crimping) (small wire barrel, 0.5 mm² contact 3-1447221-4)TE 114-78011 assigns 2151705-1 to the small barrel; production crimping only. | 1 (production) | 4 |
| Crimp tool | 2151705-2 | OCEAN end-feed applicator, pneumatic feed (production crimping)Pneumatic version of 2151705-1; confirm the barrel size against TE 114-78011 before use (TBC). | 1 (production) | 4 |
| Removal tool | None required | Contacts come out by pulling the wire once the final lock is released; a small flat-blade screwdriver can lift the lock | 1 | Medium10 |
16-18 AWG (0.75-1.25 mm²) · Gold interface, tin crimp area · stamped
| Item | Part number | Description | Qty | Source |
|---|---|---|---|---|
| Housing | 4-1437290-1 | 34-way plug | 1 | 234 |
| Terminal | 3-1447221-3 | socket, stamped and formed, double spring, F-crimp, Gold interface, tin crimp areaTE lists 15 A typical and insulation diameter 1.6-2.2 mm. Insulation over 1.9 mm only fits the eight outer positions (see specs). | 34 (1 per wire) | 54 |
| Seal | None (no separate wire seal) | The 34-way plug is supplied as a sealed housing assembly; TE's parts list and instruction sheet list only contacts, housings and the hole plug, so no single-wire seals are boughtInferred from the parts lists (no seal part exists) plus 'do not dismantle the housing'. Neither document uses the words family seal or mat seal. | 0 | Medium910 |
| Cavity plug | 4-1437284-3 | Cavity sealing plug (fills an unused cavity)Both sources give the same part number for Superseal 1.0. The TE catalog says white; the TE product page says natural polyacetal (POM). | per unused cavity | Sources disagreeMedium47 |
| Crimp tool | 2151241-1 | OCEAN applicator for 3-1447221-3 / 2461132-1 / 1-2461132-1114-78011 lists 2151705-1 for the small-barrel 0.5 mm² contacts only, while the existing data lists 2151705-1/-2 for both contacts; treat 2151241-1 as the normal-barrel applicator. | 1 | 8 |
| Crimp tool | 1454509-1 | Straight-action hand tool, Super Seal receptacle (alias 3800088-01)TE marks it superseded and not currently available; no replacement named. 114-78016 lists hand-tool applicators 1463173-2 / 1463174-2 for the AMP-O-Lectric terminator. | 1 | 13 |
| Removal tool | None required | Contacts come out by pulling the wire once the final lock is released; a small flat-blade screwdriver can lift the lock | 1 | Medium10 |
Mating part and wedge
| Mates with | 6437288-2 34Key 2 34-way headers listed for this plug: 6437288-2 and 1437288-2 (upper lock), 2-6437285-6 and 2-1437285-6 (lower lock), 2-6447232-4 and 2-1447232-4 (vertical). It also fits the 60-way header 6473427-1 / 1473427-1 next to a 26-way plug. |
|---|---|
| Wedge lock | Integral lock (no separate wedge) |
| Cavity sealing plug (fills an unused cavity) | 4-1437284-3 Sources disagreeMedium47Both sources give the same part number for Superseal 1.0. The TE catalog says white; the TE product page says natural polyacetal (POM). |
Contacts by wire size and plating
| Part number | Type | Wire | Plating | Source |
|---|---|---|---|---|
| 3-1447221-4 | socket, stamped and formed, double spring, F-crimp | 20 AWG (0.5 mm²) | Gold interface, tin crimp area | 64TE lists 6 A typical and insulation diameter 1.6-1.9 mm; the TE catalog table gives 1.6-2.2 mm. |
| 3-1447221-3 | socket, stamped and formed, double spring, F-crimp | 16-18 AWG (0.75-1.25 mm²) | Gold interface, tin crimp area | 54TE lists 15 A typical and insulation diameter 1.6-2.2 mm. Insulation over 1.9 mm only fits the eight outer positions (see specs). |
Ratings and specifications
- 1.6-1.9 mm in every positionAVSS 0.5-0.85 mm²
- 2.0-2.2 mm (AVSS 1.25 mm²) only in positions 1, 9, 10, 17, 18, 25, 26 and 34
- Up to 15 A per contact3-1447221-3
- 6 A typical for the 0.5 mm² contact 3-1447221-4
Crimp and removal tools
| Job | Part number | Tool |
|---|---|---|
| crimp | 1454509-1 | CERTI-CRIMP straight-action hand tool for 3-1447221-3 and 3-1447221-4 Medium4From TE's Superseal 1.0 catalog section. Check TE for a current replacement before ordering. |
Crimp and assembly quick card
Shared by every TE Superseal 1.0 housing: the values belong to the contacts, not the housing.
- Wire barrel: 0.5 mm² 0.90 ±0.05 mm (width 1.60 ±0.1, 3-1447221-4)
- 0.75 mm² 1.00 ±0.05
- 0.85 mm² 1.05 ±0.05
- 1.0 mm² 1.10 ±0.05
- 1.25 mm² 1.20 ±0.05 mm (width 1.85 ±0.1, 3-1447221-3). Insulation barrel: 2.2 mm max height / 2.3 mm max width up to 0.85 mm²
- 2.5 / 2.6 mm max for 1.0-1.25 mm²
Assembly
- Strip about 3.5 mm (up to 4.5 mm) without nicking strands or scarring the insulation.8
- Crimp with the TE applicator for the contact (2151241-1 for 3-1447221-3, 2151705-1 for 3-1447221-4) and check wire- and insulation-barrel height against 114-78011.8
- Check the crimp: conductor protrudes 0.3-0.8 mm past the wire barrel, bell-mouth 0.2-0.4 mm, seam closed, bend and twist within 3° (rolling 6°).8
- Hold the contact near the crimp and push it straight into the wire side of the plug until it bottoms; a deformed contact must be scrapped and a new one crimped.10
- Press both final-lock protrusions in together with your fingers until they latch; if they stop part way a contact is not fully home, so recheck it rather than forcing the lock.10
- Route wires so no single wire is under tension; make any 90° bend about 20 mm from the connector.10
Removal
- Release the final lock by lifting its release side with a fingernail or small flat-blade screwdriver until it clicks out; TE limits this to 10 releases.10
- Confirm both final-lock protrusions stand proud, then pull the wire straight back out of the housing; TE limits removal of one position to 3 times.10
- TE's instruction sheet names no dedicated extraction tool for Superseal 1.0.Medium10
Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →
Where it's used
Our harness designs
Sensors that mate with it
No sensor in our sensor library lists this connector yet.
Factory (OEM) use
No factory ECU in our pinout library uses this connector family.
Commonly used for
Assembly notes
The housing has an integrated white final lock that acts as the terminal position assurance.
Seat every contact before closing it; a lock that will not close points to a contact that is not fully home.Medium32
Only positions 1, 9, 10, 17, 18, 25, 26 and 34 accept 1.25 mm² wire with 2.0-2.2 mm insulation. Plan power and ground on those corners and run 0.5-0.85 mm² wire everywhere else.3
Key 1 and Key 2 plugs look alike. Check the full part number on the bag or housing, because this Key 2 plug will not enter a Key 1 header.Medium42
Frequently asked
What header mates with 4-1437290-1?
4-1437290-1 mates with Key 2 Superseal 1.0 34-way pin headers. TE lists 6437288-2 and 1437288-2 with an upper lock, 2-6437285-6 and 2-1437285-6 with a lower lock, and 2-6447232-4 and 2-1447232-4 as vertical headers. It also fits the 60-way header 6473427-1 beside a 26-way plug.34
What is the difference between 4-1437290-1 and 4-1437290-0?
Only the coding key differs. 4-1437290-1 is Key 2 and 4-1437290-0 is Key 1; both are 34-way, black, 3.0 mm pitch plugs with the same contacts and dimensions. A module with two 34-way headers uses one of each key so the two harness plugs cannot be swapped.124
Which terminals fit 4-1437290-1?
It takes Superseal 1.0 stamped receptacles. Use 3-1447221-4 for 0.5 mm² (20 AWG) wire and 3-1447221-3 for 0.75-1.25 mm² (18-16 AWG) wire. Both have a gold contact area over a tin crimp area. TE lists 6 A typical for the smaller contact and 15 A typical for the larger.654
Can every cavity in 4-1437290-1 take 1.25 mm² wire?
No. TE's drawing allows insulation of 2.0-2.2 mm, the size of 1.25 mm² AVSS wire, only in the eight outer positions 1, 9, 10, 17, 18, 25, 26 and 34. All 34 positions take 1.6-1.9 mm insulation, which covers 0.5-0.85 mm² AVSS. Put the heavier circuits on those corner cavities.3
Keep going
Related
Sources
13 sources
- 4-1437290-0 product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
- 4-1437290-1 product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
- Customer drawing 2-1437285-3 rev P, sheet 3 (Superseal plug housing 34 pos, 4-1437290-0 / -1) · TE Connectivity · vendor-doc · retrieved 2026-10-27
- Superseal 1.0 Connectors (TE catalog section, distributor-hosted) · TE Connectivity, hosted by Dalroad · vendor-doc · retrieved 2026-10-27
- 3-1447221-3 Superseal 1.0 receptacle product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
- 3-1447221-4 Superseal 1.0 receptacle product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
- 4-1437284-3 Superseal 1.0 sealing plug product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
- Application Specification 114-78011 rev A1 (25 Mar 2025): Super Seal contacts · TE Connectivity · vendor-doc · retrieved 2026-10-28
- Product Specification 108-78140 rev A9 (11 Oct 2021): Superseal 1.0 connector · TE Connectivity · vendor-doc · retrieved 2026-10-28
- Instruction Sheet 411-78017 rev O (10 Oct 2001): Super Seal plug housing connector · TE Connectivity (Tyco Electronics AMP K.K.) · vendor-doc · retrieved 2026-10-28
- internal GAINS internal: GAINS universal harness designs v1: Single Controller and IO Module harness build scripts, connector lists and wire lists (pre-release, not yet built)
- Application Specification 114-78016 rev A (17 Oct 2018): Super Seal connector for ACW0219 wire · TE Connectivity · vendor-doc · retrieved 2026-10-28
- 1454509-1 straight action hand tool, Super Seal receptacle contact (product page) · TE Connectivity · vendor-doc · retrieved 2026-10-28
Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.

