GM · Analog 0-5 V (ratiometric)

GM 10379038 accelerator pedal (Cadillac CTS / Chevrolet Performance controller kits)

GM 10379038GM 10367117GM 10379039

GM 10379038 is the drive-by-wire accelerator pedal that Chevrolet Performance supplies in its crate-engine controller kits, and the 2004-15 Cadillac CTS service pedal. It replaces 10367117. GM's kit instructions call for a 6-pin pedal connector and leave the pedal mount to the installer.41

Key specifications

Measures: Accelerator pedal position (redundant tracks). Output: Analog 0-5 V (ratiometric).

GM description
  • Pedal, accelerator pedal
  • Pedal travel sensor
Sourced1
Connector

6-pin accelerator pedal sensor connector (GM controller kit harness)

Sourced4
Supersession10367117→ 10379038Sourced13
Shipping weight2.1-2.2lbabout 1 kgDealer listing weights, may include packaging.Sourced · medium13
Connector pinoutUnverifiedGM's public parts catalog does not publish the pedal pinout; reseller and forum pinouts are not used here.Researched, unverified
Track slopesUnverifiedNot published in the GM documents cited.Researched, unverified
Part numberMakerNote
10379038GM14
10367117GMReplaced by 1037903813
10379039GMSeparate CTS accelerator pedal (replaces 10367116); not a supersession of 10379038Medium2

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector: 6-pin accelerator pedal sensor connector4 Connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Pedal tracks on AVI3/AVI4 (pins 19-20) with the pull-up off, sensor 5 V on pin 28 and sensor ground on pin 29 of the ECU2. Concept hardware: the drive-by-wire path needs qualified-human review before release.Medium6
Haltech (Elite / Nexus)UnverifiedNot checked against a public Haltech document that names this pedal. Confirm drive-by-wire support and the setup with Haltech before wiring.No public source
Link (G4X)UnverifiedNot checked against a public Link document that names this pedal. Confirm drive-by-wire support and the setup with Link before wiring.No public source
MoTeC (M1)UnverifiedNot checked against a public MoTeC document that names this pedal. Confirm drive-by-wire support and the setup with MoTeC before wiring.No public source
ECUMaster (EMU Black)UnverifiedNot checked against a public ECUMaster document that names this pedal. Confirm drive-by-wire support and the setup with ECUMaster before wiring.No public source
AEM (Infinity)UnverifiedNot checked against a public AEM document that names this pedal. Confirm drive-by-wire support and the setup with AEM before wiring.No public source
MaxxECUUnverifiedNot checked against a public MaxxECU document that names this pedal. Confirm drive-by-wire support and the setup with MaxxECU before wiring.No public source
Holley (Terminator X / EFI)UnverifiedNot checked against a public Holley document that names this pedal. Confirm drive-by-wire support and the setup with Holley before wiring.No public source

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

EngineRoleVehicles
LS22005-09accelerator pedalLow1Chevrolet Corvette C6 Base (LS2)
LSA (supercharged)2009-15accelerator pedalLow1Chevrolet Camaro 5th gen ZL1, Cadillac CTS-V 2nd gen

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

GM's controller-kit instructions give minimum clearances from the brake pedal and console, leave the mounting design to the installer, and prohibit altering the pedal or throttle wiring on the kit harness.4

On a standalone ECU, each pedal track needs its own analog input; use separate 5 V references where the ECU has them so one short cannot take out both tracks.Medium56

Failure modes and checks

Throttle limited under full pedal

Likely cause Pedal tracks disagree (connector or worn track)

Check Log both pedal tracks through a slow press; the relation between them should stay constant.Medium5

Kit harness pedal fault on a GM controller kit

Likely cause Pedal wiring altered or connector not seated

Check GM's instructions prohibit altering pedal wiring; inspect the 6-pin connector and restore the original harness.4

Frequently asked

Which pedal comes with the Chevrolet Performance LS controller kit?

GM's DR-525 controller-kit instructions list accelerator pedal 10379038 in the kit contents.4

What replaced GM 10367117?

10379038, per GM dealer catalog data.13

How many pins is the GM 10379038 pedal connector?

Six. GM's controller-kit instructions list a 6-pin accelerator pedal sensor connector on the engine harness.4

Where should a drive-by-wire pedal be mounted in an LS swap?

GM's kit instructions give minimum clearances to the brake pedal and console and leave the mounting design to the installer.4

Related

Use it with GAINS

GM 10379038 accelerator pedal (Cadillac CTS / Chevrolet Performance controller kits) on GAINS hardware

ECU2AVI3-AVI4 (drive-by-wire APP1/APP2)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Pedal tracks for drive-by-wire. DBW sensors are allowed only on AVI1-6, never on a flex pin or CAN.Medium6

Analog inputs AVI1-6 take 0-5 V sensors, thermistors or switches, each with a switchable pull-up. Sensor 5 V is pin 28 (250 mA shared) and sensor ground is pin 29.6

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.67

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

  1. GM 10379038 Pedal, Accelerator Pedal (Pedal Travel Sensor) · GMPartsGiant (GM parts dealer) · oem · retrieved 2026-11-04
  2. GM 10379039 Accelerator Pedal Assembly · GMPartsGiant (GM parts dealer) · oem · retrieved 2026-11-04
  3. Genuine GM 10379038 Pedal Travel Sensor · AutoPartsPrime (GM parts dealer) · oem · retrieved 2026-11-04
  4. DR-525 Series Crate Engine Control System instruction sheet (kit 19354340) · Chevrolet Performance (GM) · oem · retrieved 2026-11-04
  5. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  6. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  7. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)