Cars and engines
3 factory applications
| Vehicle | Engine | Years | Part number |
|---|---|---|---|
| Mitsubishi Fuso Canter | 4D31T | Not stated | 49179-00220 (earlier 49179-00210), Mitsubishi ME013717Low2 |
| Mitsubishi Fuso Canter / FK62 | 6M60T (Euro 4) | Not stated | 49179-02712 / 49179-02715, Mitsubishi ME304598 (TD06-7 / TD06H)Listed as wastegated with a pneumatic actuator.Low34 |
| Mitsubishi Fuso (6M60T) | 6M60T | Not stated | 49179-02511 (TD06H-20G-12.0)Low5 |
Specifications
Wheel sizes vary by source and revision; differences are flagged.
MHI frame ratings (TD06 class)
| Spec | Value | Source |
|---|---|---|
| Maximum speed | 135,000 rpm | 1 |
| Maximum exhaust temperature | 950 °C (1,742 °F) | 1 |
| Maximum pressure ratio | 3.0 | 1 |
| Output range MHI lists | Diesel 70-225 PS, 4.5-6.0 L; gasoline 85-300 PS, 2.0-3.5 LFrame sizing ranges, not ratings of a specific engine. | 1 |
| Weight | 5.0 kg (11.0 lb); 6.5 kg (14.3 lb) with wastegate | 1 |
Hardware
| Spec | Value | Source |
|---|---|---|
| Wastegate | Wastegated (pneumatic) on some versions, e.g. 6M60T | Low3 |
| Turbine flange | 4-boltOwner forum note on Mitsubishi TD turbine flanges. | Low6 |
| Compressor code example | 20G (TD06H-20G-12.0)The trailing number is the turbine housing size. | Low5 |
| Wheel sizes | Not found in a reliable sourceVaries by compressor code; no MHI datasheet found. | UnverifiedLow1 |
What the TD06 is
The TD06 turbo is the next frame up from the TD05 in Mitsubishi Heavy Industries' TD range.
MHI rates it to 135,000 rpm, below the TD05 limit of 160,000 rpm.1
MHI sizes it for 4.5-6.0 L diesels at 70-225 PS and 2.0-3.5 L gasoline engines at 85-300 PS. Those are frame ranges, not a promise for any one build.1
Where TD06s came from the factory
The factory TD06s found in this research are on Mitsubishi Fuso Canter and FK-series truck diesels, including the 4D31T and the 6M60T. Some are free-floating and some, like the Euro 4 6M60T unit, are wastegated.Low234
No factory gasoline car using a TD06 was found in the sources checked. When gasoline tuners say TD06, they usually mean an aftermarket TD06-based hybrid on a 2.0 L engine.Low61
Reading a TD06 code
In TD06H-20G-12.0, TD06H names the turbine, 20G the compressor wheel and housing, and 12.0 the turbine housing size.
The same pattern runs through the whole MHI TD range.Low5
Common problems
What fails, why, and the usual fix.
1Buying a truck TD06 for a car project
Upgrade paths
The routes owners take from the factory unit.
TD05 → TD06-based hybrid (gasoline)
Owners of TD05-equipped 2.0 L engines step up to TD06-frame hybrids for more flow, accepting later boost. Fitment depends on the kit; compare against modern maps such as the G25-660.Low61
Garrett G25-660 compressor map →Frequently asked
What is a TD06 turbo?
A TD06 is a Mitsubishi Heavy Industries turbo frame one size above the TD05. MHI rates it to 135,000 rpm and a 3.0 pressure ratio and sizes it for 4.5-6.0 L diesels and 2.0-3.5 L gasoline engines. The compressor code, such as 20G, sets its flow.Medium15
Is a TD06 bigger than a TD05?
Yes. MHI's table lists the TD06 for 85-300 PS gasoline engines against 53-265 PS for the TD05, with a lower 135,000 rpm speed limit and a heavier 5.0 kg (11.0 lb) bare weight. Bigger wheels flow more but spool later.1
What came with a TD06 from the factory?
The factory TD06s found here are on Mitsubishi Fuso Canter and FK truck diesels, including the 4D31T (ME013717) and the Euro 4 6M60T (ME304598). No factory gasoline car using a TD06 was found in the sources checked.Low234
What does TD06H-20G mean?
TD06H is the turbine side, 20G the compressor wheel and housing, and a trailing number such as 12.0 is the turbine housing size. The naming matches the rest of MHI's TD range, so a TD05H-20G and a TD06H-20G share a compressor code but not a turbine.Low5
Related
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Turbochargers for vehicles: technical information (TD series table) · Mitsubishi Heavy Industries · oem · retrieved 2026-11-04
- ME013717 turbocharger TD06, Mitsubishi Canter 4D31T · Denco Diesel · vendor-doc · retrieved 2026-11-04
- ME304598 turbocharger TD06, Mitsubishi Canter 6M60T (factory fit) · Denco Diesel · vendor-doc · retrieved 2026-11-04
- TD06-7 turbocharger ME304598 49179-02712 for Mitsubishi 6M60 Euro 4, Fuso FK62 · FridayParts · vendor-doc · retrieved 2026-11-04
- 49179-02511 TD06H-20G-12.0 turbocharger replacement for Mitsubishi 6M60T · LeadTurbo · vendor-doc · retrieved 2026-11-04
- Turbocharger specs (forum thread) · SAU (Skylines Australia) · community · retrieved 2026-11-04
Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.

