GAINS PDM2 · Gearboxes · 5R110W

Ford · Automatic

5R110W standalone controller for Power Stroke 6.0 / 6.4, V10, big gas V8s swaps

Ford's heavy-duty five-speed. Planned for direct control on PDM2's current-controlled solenoid channels.

ControlDirect control
StatusPlanned · v1 target
Gears5
Also calledTorqShift, 5R110
Common swaps

Where it ends up.

Ford Super Duty from 2003 on, behind the Power Stroke diesels and the V10.

Power Stroke 6.0 / 6.4, V10, big gas V8sheavy-duty and tow builds
Direct control

What PDM2 runs.

PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.

  • Five shift solenoids plus converter clutch and pressure control, mostly current-controlled
  • Speed sensors, range sensor, fluid temperature

With ECU2

ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

FAQ
Can the GAINS PDM2 control a 5R110W?

It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the 5R110W?

Power Stroke 6.0 / 6.4, V10, big gas V8s: heavy-duty and tow builds.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Ford and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist