GAINS PDM2 · Gearboxes · Porsche PDK

Porsche (ZF) · Dual-clutch

Porsche PDK swap controller: no separate DCT box

PDK for 911 restomods and kit cars. On the roadmap after the VW and BMW units.

ControlCAN to the factory TCU
StatusPlanned · Later
Gears7
Also calledPDK swap, 7DT45, 7DT70
Common swaps

Where it ends up.

Porsche 997.2, 991, 981 and 718.

Porsche flat-six and transplantsvintage 911 restomods and Cayman-drivetrain kit cars
CAN to the factory TCU

What PDM2 runs.

The factory TCU stays. PDM2 sends the engine-side messages it expects (torque, rpm, pedal, brake) on a private gearbox bus and reads gear and status back.

  • Private CAN bus to the factory TCU

With ECU2

ECU2 supplies the engine-side messages and shift interventions.

Good to know

Expect a buyer-supplied unlocked TCU; GAINS never flashes it.

FAQ
Can the GAINS PDM2 control a Porsche PDK?

It is planned (Later). The factory TCU stays. PDM2 sends the engine-side messages it expects (torque, rpm, pedal, brake) on a private gearbox bus and reads gear and status back. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the Porsche PDK?

Porsche flat-six and transplants: vintage 911 restomods and Cayman-drivetrain kit cars.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies the engine-side messages and shift interventions.

Do you flash or unlock the factory TCU?

No. The factory unit keeps its own calibration. Where an immobilizer unlock is needed, the buyer supplies an unlocked TCU from an authorized tool.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Porsche (ZF) and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist