Ford · Analog 0-5 V (ratiometric)

Ford BR3Z-9E926-C Coyote 5.0 electronic throttle body (2011-14)

Ford BR3Z-9E926-CFord BR3Z-9E926-AFord BR3Z-9E926-B

Ford BR3Z-9E926-C is the throttle body and motor assembly for the 2011-14 5.0 Coyote V8. It replaces BR3Z-9E926-A and -B and fits the 2011-14 Mustang GT, F-150 5.0 and Lincoln Mark LT. Ford's catalog gives fitment and supersession but no bore size or pinout.12

Key specifications

Measures: Throttle plate angle (redundant tracks); motor-driven throttle actuator. Output: Analog 0-5 V (ratiometric).

Ford descriptionThrottle body and motor assembly (base number 9E926)Sourced1
SupersessionBR3Z-9E926-A and -B → BR3Z-9E926-CSourced12
Engine5.0DOHCCoyote gen 1Sourced1
BoreUnverifiedFord's parts catalog does not state the bore; retail figures are not used here.Researched, unverified
Connector pinoutUnverifiedFord's public parts catalog does not publish the pinout; reseller and forum pinouts are not used here.Researched, unverified
Sensor type and output slopesUnverifiedNot published in the Ford parts data cited.Researched, unverified
Part numberMakerNote
BR3Z-9E926-CFord1
BR3Z-9E926-AFordReplaced by BR3Z-9E926-C1
BR3Z-9E926-BFordReplaced by BR3Z-9E926-C12

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Throttle tracks on AVI1/AVI2 (pins 17-18) with the pull-up off; motor on the H-bridge pins 21-22 of the ECU2. Concept hardware: the drive-by-wire path needs qualified-human review before release.Medium4
Haltech (Elite / Nexus)UnverifiedNot checked against a public Haltech document that names this throttle body. Confirm drive-by-wire support and the setup with Haltech before wiring.No public source
Link (G4X)UnverifiedNot checked against a public Link document that names this throttle body. Confirm drive-by-wire support and the setup with Link before wiring.No public source
MoTeC (M1)UnverifiedNot checked against a public MoTeC document that names this throttle body. Confirm drive-by-wire support and the setup with MoTeC before wiring.No public source
ECUMaster (EMU Black)UnverifiedNot checked against a public ECUMaster document that names this throttle body. Confirm drive-by-wire support and the setup with ECUMaster before wiring.No public source
AEM (Infinity)UnverifiedNot checked against a public AEM document that names this throttle body. Confirm drive-by-wire support and the setup with AEM before wiring.No public source
MaxxECUUnverifiedNot checked against a public MaxxECU document that names this throttle body. Confirm drive-by-wire support and the setup with MaxxECU before wiring.No public source
Holley (Terminator X / EFI)UnverifiedNot checked against a public Holley document that names this throttle body. Confirm drive-by-wire support and the setup with Holley before wiring.No public source

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

The 2012 Mustang catalog shows three different throttle bodies by engine: BR3Z-9E926-B for the 5.0, AT4Z-9E926-A for the 3.7 V6 and 9C3Z-9E926-C for the older 4.6 and supercharged 5.4. Match the part number, not the car.2

On a standalone ECU, wire both throttle tracks to dedicated analog inputs and the motor to the ECU's H-bridge, using a pinout from Ford service data for this body.Medium34

Failure modes and checks

Wrong throttle body fitted to a 2011-14 Mustang

Likely cause V6 or 4.6/5.4 body ordered by model year

Check Check the label for BR3Z-9E926; the 3.7 V6 uses AT4Z-9E926-A.2

Reduced power or limp mode after fitting

Likely cause Throttle tracks disagree or the ECU has not learned the body

Check Log both throttle tracks through a slow sweep and run the ECU's throttle relearn.Low3

Frequently asked

What is the part number for the 2011-2014 Coyote throttle body?

Ford's current number is BR3Z-9E926-C, which replaces BR3Z-9E926-A and BR3Z-9E926-B.1

Does the F-150 5.0 use the same throttle body as the Mustang GT?

Yes for 2011-14: Ford lists BR3Z-9E926-C for the Mustang 5.0, F-150 5.0 and Lincoln Mark LT.1

What replaced BR3Z-9E926-A?

BR3Z-9E926-C, per Ford's parts data.1

Can a Coyote throttle body run on a standalone ECU?

Only on an ECU with electronic throttle control: two analog inputs for the throttle tracks, an H-bridge for the motor and a matching pedal. Ford does not publish the pinout in its parts catalog.Medium31

Related

Use it with GAINS

Ford BR3Z-9E926-C Coyote 5.0 electronic throttle body (2011-14) on GAINS hardware

ECU2AVI1-AVI2 (TPS1/TPS2) + HB1/HB2 (motor)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Throttle tracks on AVI1/AVI2, motor on the H-bridge pins 21-22 (about 3 A continuous / 10 A peak, under review). DBW sensors never over CAN.Medium4

Drive-by-wire control is safety-relevant; the ECU2's DBW path needs qualified-human review before release.4

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.45

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

  1. Ford BR3Z-9E926-C Throttle Body And Motor Assembly · FordPartsGiant (Ford parts dealer) · oem · retrieved 2026-11-04
  2. 2012 Ford Mustang throttle bodies (catalog) · FordPartsGiant (Ford parts dealer) · oem · retrieved 2026-11-04
  3. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  4. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  5. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)

Not yet indexed: more than 40% of specs unverified.