Factory specification
Layout, dimensions and factory hardware, each with its source.
conventional sleeves (implied by Gen 3 change to PTWA; type not stated)
Sourced · medium5- Hypereutectic
- Piston cooling jets standardremoved on 2013-14 GT per Wikipedia
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
Coyote Gen 1 horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
Coyote Gen 1 firing order
The order the cylinders fire in, with the cylinder numbering the source states.
Mustang, Boss 302 and 2011-14 F-150 engines use the first order; 2015-on F-150 engines use the second (truck camshaft). Check where your engine came from.
Coyote Gen 1 injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| DeatschWerks 1000cc EV14 injectors (set of 8) · 17U-04-0095-8Medium9 | 1000 cc/min maker listing (basis not stated) | Check connector Connector fit not stated on the maker listing. |
| Ford Performance (Bosch-built) 47 lb/hr fuel injector set (8) · M-9593-LU47Medium12 | not stated 47 lb/hr @ 39.15 psi delta (x1.054 for 43.5 psi) | Plug-in |
| Fuel Injector Clinic (FIC) FIC 650cc High-Z injector set · IS403-0650H25 | 650 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS403-1000H25 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Injector Dynamics ID1050-XDS (set) · 1050.60.14.14B.86131517 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Plug-in |
| Injector Dynamics ID1300-XDS (set) · 1300.60.14.14B.87141618 | 1335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec) | Plug-in |
Coyote Gen 1 swap
Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position | Ford BR3Z-6C315-A -> BR3Z-6C315-BSourced · medium192122 | 2-pin (forum) | 2011-17 Mustang 5.0AmericanMuscle sells Ford DY1293 citing BR3Z-6C315-B for 2011-17 |
| Cam position × 4 (intake + exhaust per bank; LMR kit = intake + exhaust) | Intake Ford 9L8Z-6B288-A -> 9L8Z-6B288-B | Exhaust BR3Z-6B288-B (repl -A)Cross-ref: AmericanMuscle sells Ford DU99 (9L8Z-6B288-B)Sourced · medium1921 | Not yet sourced | 2011-14 |
| Knock | Ford AL3Z-12A699-BA -> AL3Z-12A699-ASourced · medium1920 | Not yet sourced | 2011-14 Mustang 5.0; F-150 5.0 2010-17 |
| MAF | Ford BR3Z-12B579-A (Motorcraft AFLS-165 per dealer other-names)Sourced · medium19 | 6-pin (LMR) | 2011-14 Mustang 3.7/5.0/5.4/5.8 |
| O2 (upstream) | Ford 8F9Z-9F472-D (2011-12 upper) | 8F9Z-9F472-H (2012-14 front)Sourced · medium19 | Not yet sourced | Mustang 5.0 |
| O2 (downstream) | Ford BR3Z-9G444-ASourced · medium19 | Not yet sourced | 2011-14 |
Ignition and triggers
Tuning notes
Factory load sensing
The factory ECU measures load by MAF (hot-wire / hot-film). Ford Performance 2011-14 Coyote controls pack: two UEGO 'wide range feedback ... closed loop air fuel ratio control' in 2011-12 Mustang GT stock locations; air box with integral MAF required. MAF element type (hot-film) is inference.3
Factory oxygen sensors
Upstream: wideband A/F (UEGO) from 2011 (2 (1 per bank)). Downstream O2 sensors: yes. Closed-loop fuelling: wideband (UEGO) closed-loop A/F control.3
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Per press quoting Ford engineers, the rods were strong enough for NA use "but only just" and were not meant for forced induction. The hypereutectic pistons are the other limit.Medium5
Common first upgrades (reported)
Builders most often report upgrading: forged rods and pistons.Medium5
Valvetrain, factory engine management and weak points across every generation are on the Ford Coyote guide.
Vehicles with the Coyote Gen 1
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
25 sources
- Factory ratings: Ford Modular 4.6 2V (E-705) · en.wikipedia.org · reference · retrieved 2026-10-25
- Factory ratings: Ford Modular (4.6 3V, 4.6/5.4 4V) (E-706) · en.wikipedia.org · reference · retrieved 2026-10-25
- Ford Coyote Gen1 sensors (E-807) · performanceparts.ford.com · oem · retrieved 2026-10-25
- Ford Modular 2V/3V/4V/5.4 (E-1014) · en.wikipedia.org · reference · retrieved 2026-10-25
- Coyote Gen 1/2 (E-1017) · en.wikipedia.org · reference · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1205) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1208) · nipponpower.com · reference · retrieved 2026-10-25
- OEM injector (E-1212) · onallcylinders.com · press · retrieved 2026-10-25
- OEM injector (E-1213) · onallcylinders.com · press · retrieved 2026-10-25
- OEM injector (E-1216) · performanceparts.ford.com · oem · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Ford Mustang (E-1327) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Ford F-150 (E-1328) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
- Ford Coyote crank sensor retail (E-1332) · americanmuscle.com · reference · retrieved 2026-10-25
- Ford Coyote crank connector change (E-1333) · mustang6g.com · community · retrieved 2026-10-25
- Firing order and numbering: Ford 5.0 Coyote (E-4808) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
- Firing orders: Ford engines (reference list) (E-4816) · aa1car.com · reference · retrieved 2026-10-28
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.


