GM · Analog 0-5 V (ratiometric)
GM 12629992 87 mm drive-by-wire throttle body (Gen IV truck, LSA, LS9)
GM 12629992 is the 87 mm drive-by-wire throttle body fitted to 2009-15 GM V8 trucks, vans and SUVs, plus the supercharged CTS-V and Camaro ZL1 (LSA) and Corvette ZR1 (LS9). It replaces 12601387, sells as ACDelco 217-3151, and uses a 6-pin connector.Medium12
Key specifications
Measures: Throttle plate angle (redundant tracks); motor-driven throttle actuator. Output: Analog 0-5 V (ratiometric).
Pinout and connector
No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.
Connector not published. Browse the connector library
Native support across ECUs
| ECU platform | Status | How to set it up | Source |
|---|---|---|---|
| GAINS ECU2Concept | Configurable (generic input) | Throttle tracks on AVI1/AVI2 (pins 17-18) with the pull-up off; motor on the H-bridge pins 21-22 of the ECU2. Concept hardware: the drive-by-wire path needs qualified-human review before release. | Medium5 |
| Haltech (Elite / Nexus) | Unverified | Not checked against a public Haltech document that names this throttle body. Confirm drive-by-wire support and the setup with Haltech before wiring. | No public source |
| Link (G4X) | Unverified | Not checked against a public Link document that names this throttle body. Confirm drive-by-wire support and the setup with Link before wiring. | No public source |
| MoTeC (M1) | Unverified | Not checked against a public MoTeC document that names this throttle body. Confirm drive-by-wire support and the setup with MoTeC before wiring. | No public source |
| ECUMaster (EMU Black) | Unverified | Not checked against a public ECUMaster document that names this throttle body. Confirm drive-by-wire support and the setup with ECUMaster before wiring. | No public source |
| AEM (Infinity) | Unverified | Not checked against a public AEM document that names this throttle body. Confirm drive-by-wire support and the setup with AEM before wiring. | No public source |
| MaxxECU | Unverified | Not checked against a public MaxxECU document that names this throttle body. Confirm drive-by-wire support and the setup with MaxxECU before wiring. | No public source |
| Holley (Terminator X / EFI) | Unverified | Not checked against a public Holley document that names this throttle body. Confirm drive-by-wire support and the setup with Holley before wiring. | No public source |
Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.
Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.
CAD and drawings
The maker does not publish a data sheet, drawing or CAD model for this part that we could find.
We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.
Engines that use it
| Engine | Role | Vehicles |
|---|---|---|
| 5.3 LM7 / L59 / LY5 (Gen III/IV truck)1999-13 | electronic throttle bodyMedium12 | Chevrolet / GMC Silverado / Sierra / Tahoe / Yukon GMT800 4.8 / 5.3, Chevrolet / GMC Silverado / Sierra / Tahoe / Yukon GMT900 5.3 (LY5 / LMG / LC9) |
| 6.0 LQ4 / LQ9 / LY6 / L96 (truck)1999-17 | electronic throttle bodyMedium12 | Chevrolet / GMC Silverado / Sierra / Tahoe / Yukon GMT800 / GMT900 6.0 (LQ4 / LQ9 / LY6) |
| LSA (supercharged)2009-15 | electronic throttle bodyMedium1 | Chevrolet Camaro 5th gen ZL1, Cadillac CTS-V 2nd gen |
| LS9 (supercharged)2009-13 | electronic throttle bodyMedium1 | Chevrolet Corvette C6 ZR1 |
From the platform catalog's sensor table; check fitment against your engine code and model year.
Wiring and installation
A GM parts retailer describes this body as a common upgrade for truck intake swaps; on 2003-2007 trucks it needs an adapter module between the older throttle control and this body.Low2
On a standalone ECU, wire both throttle tracks to dedicated analog inputs and the motor to the ECU's H-bridge. Use the maker's or OEM's pinout for the exact body.Medium45
Failure modes and checks
Likely cause Throttle tracks disagree or the ECU has not learned the new body
Check Log both throttle tracks through a slow sweep and run the ECU's throttle relearn.Low4
Likely cause Older throttle control not compatible with this body
Check The retailer says these trucks need an adapter module; confirm before fitting.Low2
Frequently asked
Related
Use it with GAINS
GM 12629992 87 mm drive-by-wire throttle body (Gen IV truck, LSA, LS9) on GAINS hardware
Drive-by-wire control is safety-relevant; the ECU2's DBW path needs qualified-human review before release.5
GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.56
Concept Pre-release hardware. Pin assignments come from the current design documents and may change.
Sources
- GM 12629992 throttle body (replaces 12601387): fitment · ChevyPartsDeal (GM parts dealer) · oem · retrieved 2026-11-04
- 87mm throttle body, Genuine GM 12629992 / ACDelco 217-3151 · Michigan Motorsports (GM parts retailer) · vendor-doc · retrieved 2026-11-04
- GM 19420707 throttle body (replaces 12605109): fitment · ChevyPartsDeal (GM parts dealer) · oem · retrieved 2026-11-04
- Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
- internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
- internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)

