Bosch · Analog 0-5 V (ratiometric)
Bosch PS-AA 2.5 bar absolute air pressure sensor (0 261 230 284)
Bosch 0 261 230 284 is the 0.2-2.5 bar (2.9-36.3 psi) absolute version of the PS-AA air pressure sensor, enough for about 1.5 bar (22 psi) of boost at sea level. It takes 5 V and gives a ratiometric 0.4-4.65 V signal at 1,848 mV per bar with a 30.4 mV offset. Pins: 1 supply, 2 ground, 3 signal.2
Key specifications
Measures: Absolute air pressure, 0.2-2.5 bar (2.9-36.3 psi). Output: Analog 0-5 V (ratiometric).
| Part number | Maker | Note |
|---|---|---|
| 0 261 230 284 | Bosch | Printed 0261.230.284 on the data sheet (PS-AA, 0.2-2.5 bar)2 |
Pinout and connector
- Supply
- Ground / return
- Signal
- Shield
- Not used / not listed
| Pin | Function (as published) | Typical ECU input | Wire note |
|---|---|---|---|
| 1 | Supply (US, 5 V) | +5 V sensor reference | — |
| 2 | Ground | Sensor ground | Return to sensor ground, not chassis |
| 3 | Pressure signal | Analog voltage input (pull-up off) | — |
Pin functions as Bosch publishes them; the drawing is a schematic in pin order, not the connector's true cavity layout.2 The ECU-input and wire columns are our general guidance, not the maker's.
Connector: Bosch Compact 1.1a, 3-pole, coding 1 (RB-COMP 1.1a/3P/Kod.1); mating part D261.205.366-012 Connector library
Terminals and seals: Not listed: the data sheet gives the mating housing only.
Transfer function and calibration data
Ua = 1.848 V/bar × p + 0.0304 V (at Us = 5 V)
Points computed from Bosch's sensitivity and offset.
Show the 5 data points
| Absolute pressure (bar) | Output (V) |
|---|---|
| 0.2 | 0.4 |
| 1 | 1.878 |
| 1.5 | 2.802 |
| 2 | 3.726 |
| 2.5 | 4.65 |
How it's calibrated
ECU-neutral: enter these values in whichever ECU you use. Nominal values without the maker's tolerance band.
Transfer function
- 0.4–4.65 V → 20–250 kPa absolute (maker: Ua = 1.848 V/bar × p + 0.0304 V (at Us = 5 V))2Calculated from the maker's data
Worked conversion
- At 2.53 V the maker's transfer line gives 135 kPa absolute (19.6 psia).2Calculated from the maker's data
Pressure transfer at 5 V: output voltage to pressure (9 rows)Calculated from the maker's data
| Output (V) | Pressure (kPa absolute) | Pressure (psia) |
|---|---|---|
| 0.5 | 25.4 | 3.69 |
| 1 | 52.5 | 7.61 |
| 1.5 | 79.5 | 11.54 |
| 2 | 106.6 | 15.46 |
| 2.5 | 133.7 | 19.39 |
| 3 | 160.7 | 23.31 |
| 3.5 | 187.8 | 27.23 |
| 4 | 214.8 | 31.16 |
| 4.5 | 241.9 | 35.08 |
Interpolated between the maker's published points; nominal values with no tolerance band.
Native support across ECUs
| ECU platform | Status | How to set it up | Source |
|---|---|---|---|
| GAINS ECU2Concept | Configurable (generic input) | Any AVI (AVI1-6; pins 17-20, 14 and 26 on the ECU2): 0-5 V input with the pull-up off. Concept hardware. | Medium3 |
| Haltech (Elite / Nexus) | Configurable (generic input) | One of the 11 0-5 V analog inputs listed for the Nexus R3 (switchable 5 V pull-up, set off); enter the maker's transfer function. | Medium5 |
| Link (G4X) | Configurable (generic input) | Analogue voltage input (9 on the G4X FuryX). Link's public page does not describe how a custom calibration is entered. | Medium6 |
| MoTeC (M1) | Configurable (generic input) | Analogue voltage input (17 on the M150). The public page does not describe calibration entry for this sensor. | Medium7 |
| ECUMaster (EMU Black) | Configurable (generic input) | One of 9 analog 0-5 V inputs (10-bit) on the EMU Black. The page lists user-defined characteristics only for fuel pressure. | Medium8 |
| AEM (Infinity) | Configurable (generic input) | Analog 0-5 V input (12-bit). AEM's spec sheet does not say how a custom calibration is entered. | Medium9 |
| MaxxECU | Configurable (generic input) | Extra 0-5 V input on the RACE. The public page does not describe calibration entry. | Medium10 |
| Holley (Terminator X / EFI) | Unverified | Not checked: we cite only public product pages, and none for Holley covers this sensor. | No public source |
Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.
Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.
CAD and drawings
- Data sheetPressure Sensor Air PS-AA data sheet (PDF)2Download from Bosch MotorsportNo login at last check; the maker may change this
We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.
Wiring and installation
Three wires: 5 V reference to pin 1, sensor ground to pin 2, pin 3 to an analog input with the pull-up off. Use a 2 ms RC filter at the input and mount the port within ±60° of vertical so condensate drains.2
Failure modes and checks
Likely cause No input filtering at the ECU
Check Bosch recommends an RC low-pass filter with a time constant of about 2 ms on the ECU input.2
Likely cause Condensate in the port
Check Mount the port facing down, within ±60° of vertical as Bosch specifies.2
Test it with a multimeter
- Key on, engine off, port open to air: back-probe signal to sensor ground and expect about 1.9 V; the supply pin should read the ECU's 5 V reference.2Calculated from the maker's data
Frequently asked
How much boost can a 2.5 bar MAP sensor read?
About 1.5 bar (22 psi) of boost at sea level: 2.5 bar absolute minus roughly 1 bar of atmosphere. At altitude, where ambient pressure is lower, slightly more gauge boost fits under the same ceiling.Medium21
What is the pinout of the Bosch 0 261 230 284?
Pin 1 is the 5 V supply, pin 2 ground and pin 3 the pressure signal. It uses the same 3-pole Bosch Compact connector as the 1.15 bar version (mating D261.205.366-01).2
What is the transfer function of the PS-AA 2.5 bar?
1,848 mV per bar with a 30.4 mV offset at 5 V supply: 0.2 bar reads 0.40 V, 1 bar 1.88 V and 2.5 bar 4.65 V.2
Related
Use it with GAINS
Bosch PS-AA 2.5 bar absolute air pressure sensor (0 261 230 284) on GAINS hardware
GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.34
Concept Pre-release hardware. Pin assignments come from the current design documents and may change.
Sources
10 sources
- Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-11-04
- Pressure Sensor Air PS-AA data sheet 52308363 (27 Jan 2026) · Bosch Motorsport (Bosch Engineering GmbH) · vendor-doc · retrieved 2026-11-04
- internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
- internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
- Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-11-04
- G4X FuryX product page · Link Engine Management · vendor-doc · retrieved 2026-10-27
- M150 product page (M1 series) · MoTeC · vendor-doc · retrieved 2026-10-27
- EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-11-04
- Infinity Series 5 hardware specification · AEM Electronics · vendor-doc · retrieved 2026-10-27
- MaxxECU RACE product page · MaxxECU · vendor-doc · retrieved 2026-11-04

