GM · Analog 0-5 V (ratiometric)

GM 12711681 1-bar MAP sensor (LT, late LS)

GM 12711681

GM 12711681 is the naturally aspirated (1-bar) MAP sensor on GM's Gen V LT V8s, including the LT1, LT4 and truck L83/L86/L84/L87, and on 2009-on Gen IV truck engines. On the supercharged LT4 it works alongside a separate TMAP after the supercharger. GM supersedes several earlier numbers with it.Medium245

Key specifications

Measures: Absolute manifold pressure (1-bar class). Output: Analog 0-5 V (ratiometric).

Range class1-barper retailer listingLow confidence5
Supersedes12694725, 12644228, 12594942, 12701247Sourced · medium25
Transfer functionUnverifiedNot published by GM in a public document.Researched, unverified
PinoutUnverifiedNot published in a public GM document we could archive.Researched, unverified
Part numberMakerNote
12711681GMSupersedes 12694725, 12644228, 12594942, 12701247Medium245

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Any AVI (AVI1-6; pins 17-20, 14 and 26 on the ECU2): 0-5 V input with the pull-up off. Concept hardware.Medium6
Haltech (Elite / Nexus)Configurable (generic input)Analog voltage input (AVI). Haltech's wiring diagram says inputs are user definable in software; enter the maker's transfer function.910
Link (G4X)Configurable (generic input)Analogue voltage input (9 on the G4X FuryX). Link's public page does not describe how a custom calibration is entered.Medium11
MoTeC (M1)Configurable (generic input)Analogue voltage input (17 on the M150). MoTeC's sensor pages show a manual-calibration option in M1 Tune.Medium1213
ECUMaster (EMU Black)Configurable (generic input)One of 9 analog 0-5 V inputs. ECUMaster lists user-defined sensor characteristics for some functions.Medium14
AEM (Infinity)Configurable (generic input)Analog 0-5 V input (12-bit). AEM's spec sheet does not say how a custom calibration is entered.Medium15
MaxxECUConfigurable (generic input)Extra 0-5 V input (6 on the RACE). The public page does not describe calibration entry.Medium16
Holley (Terminator X / EFI)Configurable (generic input)'5' analog input, set up as a custom sensor in Holley's software (per the wiring manual).17

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

  • Parts catalogueOfficial parts-catalogue listing (no data sheet or CAD published)Medium8Download from GM Genuine PartsNo login at last check; the maker may change this

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

Three-wire ratiometric sensor; take reference and ground from the ECU's sensor rail. Do not use it to read boost: it is a 1-bar class sensor.Low51

Failure modes and checks

MAP flat at atmosphere under boost

Likely cause 1-bar sensor on a boosted engine

Check Fit a 3- or 4-bar sensor.Medium1

Erratic idle MAP

Likely cause Cracked hose or loose sensor seal

Check Smoke-test the manifold around the sensor.Medium1

Frequently asked

What engines use the 12711681 MAP sensor?

The GM catalog lists it for Gen V LT V8s (LT1, LT4, L83/L86, L84/L87) and 2009-on Gen IV trucks.Medium245

Can the 12711681 read boost?

No. It is a 1-bar class sensor; GM's supercharged LT4 uses an extra TMAP for boost.Low5

Related

Use it with GAINS

GM 12711681 1-bar MAP sensor (LT, late LS) on GAINS hardware

ECU2Internal 4-bar MAP

Pins
On the ECU2 pin map
Pull-up
Not used
Shielding
Not needed

The ECU2 has its own 4-bar MAP on a hose barb, so an external MAP is optional (finer resolution or a second pressure such as boost before the throttle).Medium6

ECU2AVI (0-5 V, pull-up off)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Any free analog input with its pull-up off; 5 V from pin 28, ground to pin 29.Medium6

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.67

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

17 sources
  1. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  2. OEM sensors GM Camaro: GM part numbers for Camaro knock/crank/cam/MAF/MAP/O2 sensors by year and engine (L98, LT1, LS1, LS3, LSA, LT1 · gmpartsgiant.com · oem · retrieved 2026-10-25
  3. OEM sensors GM Corvette: GM part numbers for Corvette knock/crank/cam/MAP/MAF/O2 1984-2024 (L98, LT1, LS1, LS6, LS2, LS3, LS7, LS9, LT1 · gmpartsgiant.com · oem · retrieved 2026-10-25
  4. OEM sensors GM Silverado: GM part numbers for Silverado gas V8 knock/MAP/MAF/O2/crank/cam 1999-2024 (Gen III/IV/V truck) · gmpartsgiant.com · oem · retrieved 2026-10-25
  5. GM sensors retailer catalogue: Genuine GM / Delphi / NTK / Denso / ACDelco LS and LT sensor listings with fitment titles (24x/58x crank, cam, · michiganmotorsports.com · vendor-doc · retrieved 2026-10-25
  6. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  7. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
  8. GM Genuine Parts catalogue listing · GM Genuine Parts · oem · retrieved 2026-10-27
  9. Nexus R3 wiring diagram (HT-193000_WD) · Haltech · vendor-doc · retrieved 2026-10-27
  10. Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-10-27
  11. M150 product page (M1 series) · MoTeC · vendor-doc · retrieved 2026-10-27
  12. TMAP Sensor product page · MoTeC · vendor-doc · retrieved 2026-10-27
  13. EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-10-27
  14. Infinity Series 5 hardware specification · AEM Electronics · vendor-doc · retrieved 2026-10-27
  15. MaxxECU RACE product page · MaxxECU · vendor-doc · retrieved 2026-10-27
  16. HP / Dominator EFI wiring manual 199R10555 · Holley · vendor-doc · retrieved 2026-10-27

Not yet indexed: fewer than 3 FAQs; more than 40% of specs unverified.