GM · Analog 0-5 V (ratiometric)

GM 19418807 1-bar MAP sensor (Gen III / early Gen IV LS)

GM 19418807

GM 19418807 is the 1-bar MAP sensor GM lists for the LS1 and LS6 and for Corvette and Camaro LS2, LS7 and L76 applications up to about 2008, replacing 12614970 and 16212460. It reads naturally aspirated manifold pressure; a boosted LS needs a 2-, 3- or 4-bar sensor instead.Medium23

Key specifications

Measures: Absolute manifold pressure (1-bar class). Output: Analog 0-5 V (ratiometric).

Replaces12614970,16212460Sourced · medium2
Transfer functionUnverifiedNot published by GM publicly.Researched, unverified
PinoutUnverifiedNot published in a public GM document we could archive.Researched, unverified
Part numberMakerNote
19418807GMReplaces 12614970 and 16212460Medium23

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Any AVI (AVI1-6; pins 17-20, 14 and 26 on the ECU2): 0-5 V input with the pull-up off. Concept hardware.Medium6
Haltech (Elite / Nexus)Configurable (generic input)Analog voltage input (AVI). Haltech's wiring diagram says inputs are user definable in software; enter the maker's transfer function.89
Link (G4X)Configurable (generic input)Analogue voltage input (9 on the G4X FuryX). Link's public page does not describe how a custom calibration is entered.Medium10
MoTeC (M1)Configurable (generic input)Analogue voltage input (17 on the M150). MoTeC's sensor pages show a manual-calibration option in M1 Tune.Medium1112
ECUMaster (EMU Black)Configurable (generic input)One of 9 analog 0-5 V inputs. ECUMaster lists user-defined sensor characteristics for some functions.Medium13
AEM (Infinity)Configurable (generic input)Analog 0-5 V input (12-bit). AEM's spec sheet does not say how a custom calibration is entered.Medium14
MaxxECUConfigurable (generic input)Extra 0-5 V input (6 on the RACE). The public page does not describe calibration entry.Medium15
Holley (Terminator X / EFI)Configurable (generic input)'5' analog input, set up as a custom sensor in Holley's software (per the wiring manual).16

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

Three-wire ratiometric sensor on the ECU's 5 V reference and sensor ground.Medium1

Failure modes and checks

MAP stuck high

Likely cause Open ground or blocked port

Check Check ground at the plug and the port for oil or debris.Medium1

Lean tip-in on a swap

Likely cause Sensor not plumbed to manifold vacuum

Check Confirm the sensor sees manifold pressure, not atmosphere.Medium1

Frequently asked

What MAP sensor does an LS1 use?

GM lists 19418807 (replacing 12614970 and 16212460) for the LS1 and LS6.Medium23

Can I use the 19418807 on a turbo LS?

Only up to atmospheric pressure. It is a 1-bar sensor, so use a 3- or 4-bar sensor for boost.Medium1

Related

Use it with GAINS

GM 19418807 1-bar MAP sensor (Gen III / early Gen IV LS) on GAINS hardware

ECU2Internal 4-bar MAP

Pins
On the ECU2 pin map
Pull-up
Not used
Shielding
Not needed

The ECU2 has its own 4-bar MAP on a hose barb, so an external MAP is optional (finer resolution or a second pressure such as boost before the throttle).Medium6

ECU2AVI (0-5 V, pull-up off)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Any free analog input with its pull-up off; 5 V from pin 28, ground to pin 29.Medium6

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.67

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

16 sources
  1. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  2. OEM sensors GM Camaro: GM part numbers for Camaro knock/crank/cam/MAF/MAP/O2 sensors by year and engine (L98, LT1, LS1, LS3, LSA, LT1 · gmpartsgiant.com · oem · retrieved 2026-10-25
  3. OEM sensors GM Corvette: GM part numbers for Corvette knock/crank/cam/MAP/MAF/O2 1984-2024 (L98, LT1, LS1, LS6, LS2, LS3, LS7, LS9, LT1 · gmpartsgiant.com · oem · retrieved 2026-10-25
  4. OEM sensors GM Silverado: GM part numbers for Silverado gas V8 knock/MAP/MAF/O2/crank/cam 1999-2024 (Gen III/IV/V truck) · gmpartsgiant.com · oem · retrieved 2026-10-25
  5. GM sensors retailer catalogue: Genuine GM / Delphi / NTK / Denso / ACDelco LS and LT sensor listings with fitment titles (24x/58x crank, cam, · michiganmotorsports.com · vendor-doc · retrieved 2026-10-25
  6. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  7. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
  8. Nexus R3 wiring diagram (HT-193000_WD) · Haltech · vendor-doc · retrieved 2026-10-27
  9. Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-10-27
  10. M150 product page (M1 series) · MoTeC · vendor-doc · retrieved 2026-10-27
  11. TMAP Sensor product page · MoTeC · vendor-doc · retrieved 2026-10-27
  12. EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-10-27
  13. Infinity Series 5 hardware specification · AEM Electronics · vendor-doc · retrieved 2026-10-27
  14. MaxxECU RACE product page · MaxxECU · vendor-doc · retrieved 2026-10-27
  15. HP / Dominator EFI wiring manual 199R10555 · Holley · vendor-doc · retrieved 2026-10-27

Not yet indexed: fewer than 3 FAQs; more than 40% of specs unverified.