GM LS (Gen III / IV) · 1997-04

LS1 firing order: specs, horsepower, injectors, swaps and sensors

The LS1 is a naturally aspirated 5.7 L V8 engine from GM (1997-04) with port fuel injection and coil-on-plug ignition. Its firing order is 1-8-7-2-6-5-4-3. The factory ECU measures load by MAF+MAP. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low122526342427101169 Conflict

Power: 345 hp @ 5,600 rpm · Torque: 350 lb-ft (475 Nm) @ 4,400 rpm (GM rating, not a GAINS measurement)Medium1225

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1997-04Catalog range across the variants on this page.Researched, unverified
Displacement5.7L5,665 cc from bore × strokeConflict1225
LayoutV8Researched, unverified
Bore × stroke99 × 92mm3.90 × 3.62 inConflict1225
Compression ratio10.1:1Conflict1225
Redline6,000rpmConflict1225
Aspirationnaturally aspiratedResearched, unverified
Recommended fuelpremium unleadedConflict1225
Fuel injectionport fuel injectionSourced · medium101169
BlockaluminiumSourced · medium424275
Cylinder linersgray-iron liners centrifugally cast-inSourced · medium424275
Main caps

6-bolt cross-bolted powdered-metal caps (4x M10 vertical + 2x M8 horizontal)

Sourced · medium424275
Crankshaftnodular iron, internally balancedSourced · medium424275
Connecting rods

sintered-forged (powder-forged) PF1159M steel, fracture-split (cracked) big end

Sourced · medium424275
Pistonshypereutectic, flat-topSourced · medium424275

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

LS1 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (GM rating)345hp @ 5,600 rpm1997 C5 Corvette launch rating (SAE paper 970915 / GM), SAE net.Conflict1225
Torque (GM rating)350 lb-ft @ 4,400 rpm475 NmConflict1225
Other published ratings
  • 2001-04 Corvette: 350 hp @5600 / 375 lb-ft @4400
  • F-body Camaro/Firebird 1998-2002: ~305-325 hp
  • Pontiac GTO 2004: 350 hp
  • HSV up to 382 bhp
  • CR conflict: 10.1 (Corvsport/GM 1997) vs 10.25 (Wikipedia table) vs 10.2
Conflict1225

LS1 firing order

The order the cylinders fire in, with the cylinder numbering the source states.

  1. 1
  2. 8
  3. 7
  4. 2
  5. 6
  6. 5
  7. 4
  8. 3
  9. Medium26Sourced · medium
FRONTLeft (driver) bank11385673Right (passenger) bank24476582
Top view, front of the engine at the top. Small badges show each cylinder's place in the firing sequence. Numbered front to back: odd cylinders on the left (driver-side in a left-hand-drive car) bank, even on the right.

LS1 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleLS1 tall injector, EV1 (Jetronic) connectorSourced · medium101169
Flow315cc/minconverted from 30 lb/hr (2001-04; basis not stated by source, GM rates at 58 psi)Sourced · medium101169
ImpedancehighsaturatedSourced · medium101169
ConnectorEV1 / JetronicSourced · medium101169
Lengthstandard2.5 in between O-rings; ID code 60 mmSourced · medium101169
FeedtopSourced · medium101169
O-ring OD (top / bottom)14/ 14 mmSourced · medium101169

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
Fuel Injector Clinic (FIC) FIC 525cc High-Z injector set · IS301-0525H28525 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Needs adapter harness plug change; FIC set includes USCAR pigtails (PGTUSC8) or optional plug-and-play adapters PADPUtoJ8
Fuel Injector Clinic (FIC) FIC 1200cc High-Z injector set · IS301-1200H281200 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Plug-in
Injector Dynamics ID1050-XDS (set) · 1050.60.14.14.861215171065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec)Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them
Injector Dynamics ID1300-XDS (set) · 1300.60.14.14.871316181335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec)Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them
Injector Dynamics ID2600-XDS (set) · 2600.60.14.14.881416192600 cc/min cc/min @ 3.0 bar (43.5 psi) (maker spec)Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them

LS1 swap

Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.

LS + BMW M DCT swap guideAn LS with a BMW M DCT (GS7D36SG) in an E36 is a niche, fabrication-heavy swap.Recommends the LS1 · difficulty 5/5E30 LS SwapAn E30 LS swap is an established but fabrication-heavy V8 conversion: mount kits and a few complete kits exist, but builders still solve an oil pan that clears the front subframe and steering rack, brake booster space at the firewall, a T56 or adapted BMW gearbox, and a rear differential and trailing-arm rear built for six cylinders.Recommends the LS1 · difficulty 4/5LS Swap BMW E36An E36 LS swap is a popular V8 conversion with complete kits that include mounts, headers, a transmission crossmember, a driveshaft and a collapsible steering shaft.Recommends the LS1 · difficulty 3/5LS Swap BMW E46An E46 LS swap is less common than the E36 version because the E46 runs engine data to the cluster and stability system over CAN bus.Recommends the LS1 · difficulty 4/53rd Gen Camaro LS Swap (1982-92)A 3rd gen Camaro LS swap is a common, well-supported conversion for 1982-92 Camaros and Firebirds.Recommends the LS1 · difficulty 3/5C4 Corvette LS Swap (1984-96)An LS swap C4 Corvette build is well known but less turnkey than a G-body or Camaro.Recommends the LS1 · difficulty 4/5G-Body LS Swap (1978-88)An LS swap G body build is one of the best-supported V8 conversions: bolt-in mount brackets, crossmembers, pans and headers exist for the 1978-88 cars.Recommends the LS1 · difficulty 2/5S10 LS Swap (1982-2004)An LS swap S10 build is one of the best-supported V8 truck conversions, but the parts come as matched systems.Recommends the LS1 · difficulty 3/5240Z LS SwapA 240Z LS swap is one of the best-supported V8 conversions for the S30, with mount, crossmember and transmission-mount kits from several makers.Recommends the LS1 · difficulty 3/5Fox Body LS Swap (1979-93)An LS swap into a Fox body Mustang is a well-supported conversion, with brackets, swap K-members, headers and crossmembers sold for 1979-93 cars.Recommends the LS1 · difficulty 3/5Ford Ranger LS Swap (1983-2011)A Ford Ranger LS swap is possible but is a fabrication job: we found no current bolt-in LS mount kit for 1983-2011 Rangers, so builds use universal weld-in mounts.Recommends the LS1 · difficulty 4/5G35 LS Swap (V35, 2003-2007)A G35 LS swap borrows most hardware from the 350Z, since both share Nissan's FM platform, and Sikky and LOJ sell kits for the G35 sedan and coupe.Recommends the LS1 · difficulty 3/5Jeep Cherokee XJ LS Swap (1984-2001)A Jeep XJ LS swap is an established conversion with a bolt-and-weld mount kit, headers, radiator and fuel parts from Novak.Recommends the LS1 · difficulty 4/5Jeep Wrangler LS Swap (TJ 1997-2006 and JK 2007-2018)The LS swap Jeep Wrangler owners most often do is the 1997-2006 TJ, which has mature mount, adapter and fuel kits.Recommends the LS1 · difficulty 4/5LS Swap NA MiataAn LS swap Miata is a well-known but fabrication-heavy conversion.Recommends the LS1 · difficulty 4/5LS Swap RX-7 (FD)An LS swap RX-7 (FD) is a long-established conversion that replaces the 13B-REW rotary with a GM V8, usually with a T56-family six-speed.Recommends the LS1 · difficulty 4/5RX-8 LS Swap (SE3P, 2004-2011 US)An RX8 LS swap is well documented but more involved than most Mazda swaps, with kits from Hinson, V8 Roadsters, CXRacing and LS1RX8.com.Recommends the LS1 · difficulty 4/5LS Swap 240SX (S13)An LS swap 240SX is one of the most common V8 conversions for the S13, backed by bolt-in mount, oil pan, driveshaft and header kits.Recommends the LS1 · difficulty 3/5300ZX LS Swap (Z32, 1990-1996)A 300ZX LS swap is a well-supported conversion for the 1990-1996 Z32, with bolt-in mounts, oil pans and gearbox adapters from LOJ Conversions and G Force.Recommends the LS1 · difficulty 3/5350Z LS Swap (Z33)A 350Z LS swap is a well-supported V8 conversion for the Z33, with bolt-in mount kits, swap oil pans, headers and plug-in harnesses on the market.Recommends the LS1 · difficulty 3/5944 LS Swap (1982-91)A 944 LS swap is an established V8 conversion for the 1982-91 Porsche 944, supported by kits with mounts, an oil pan, headers and a bellhousing-to-torque-tube adapter.Recommends the LS1 · difficulty 4/5Subaru BRZ / Scion FR-S / Toyota 86 LS Swap (2013-2020)An LS swap BRZ, FR-S or 86 is an established but advanced build with bolt-in mount, oil pan, header and driveshaft kits from Sikky and an ICT Billet mount kit.Recommends the LS1 · difficulty 4/5Tacoma LS Swap (1995-2004)A Tacoma LS swap is a known but less kit-supported conversion for the 1995-2004 truck.Recommends the LS1 · difficulty 4/5Volvo 240 LS Swap (1975-93)An LS swap into a Volvo 240 is a known but fabrication-heavy conversion: few bolt-in parts are sold, and builders typically make or adapt mounts, the transmission crossmember and exhaust.Recommends the LS1 · difficulty 4/5OBS LS Swap (1988-1998 C/K, Tahoe, Yukon, Suburban)An OBS LS swap is a natural fit because the 1988-1998 GMT400 trucks came with small-block V8s, so bolt-in adapter mounts and crossmembers exist for 2WD and 4WD.GM LS (Gen III / IV) swap · difficulty 2/5LS Swap C10 Square Body (1973-87)An LS swap C10 puts a GM Gen III/IV LS V8 (most often a junkyard 5.3 or 6.0 truck engine) or a Gen V LT into a 1973-87 square-body truck, and bolt-in mounts, swap oil pans, headers and crossmembers are sold for both.GM LS (Gen III / IV) swap · difficulty 3/5

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank positionGM 12560228 (repl 12555566)Cross-ref: NTK EH0157Sourced · medium2021222324x reluctor (sensor type not stated by source) · 24x1997-2005 Corvette, 1998-2002 Camaro, 1999-2007 Silverado
Cam positionGM 19420911 (repl 12561211, 19420372)Cross-ref: NTK EC0099Sourced · medium20212223Not yet sourced1999-2004 Corvette, 1999-2002 Camaro, 1999-2007 Silverado; 1997-98 cars GM 12560229
Knock × 2 (sold as pair)GM 12589867 (repl 10456603); MM notes possible supersession to 12601822Sourced · medium20212223Not yet sourced1998-2002 Camaro/Firebird, 1998-2004 Corvette, 1999-2007 Silverado 4.8/5.3/6.0Valley-mounted per MM listing (intake valley)
MAPGM 19418807 (repl 12614970, 16212460)Sourced · medium20211-bar MAP (ICT lists 12614970 as 1 bar)1998-2002 Camaro 5.7; 1997-2008 Corvette
MAFGM 19332972 kit (repl 25008308, 19207203) | GM 19330122 (Corvette 2002-04)Sourced · medium2021Not yet sourcedCamaro 1998-2002; Corvette 2002-04
O2 (upstream)GM 19178930 (Corvette 1997-2003) | GM 19355308 (Camaro 1998-2002, position not stated) | GM 12569429 (Corvette 2004 front)Cross-ref: Denso 234-4087 (98-02 LS1 F-body); Denso 234-4012 (94-03 Corvette upstream)Sourced · medium202123Not yet sourcedCatalogue flags 19355308 URL "do not use, contact tech specialist"
O2 (downstream)GM 19178924 (Camaro 1996-2002 rear) | GM 19355312 (Corvette 2000-03 rear)Sourced · medium2021Not yet sourced
Coolant tempGM 12608814 | GM 19236568 (ACDelco 213-4514)Cross-ref: ACDelco 213-4514Sourced · medium23Not yet sourcedLS 1999-2018 (12608814); LS 4.8-6.2 (19236568)
Intake air tempGM 12160244Sourced · medium23Not yet sourced97-00 Corvette, 1998-02 Camaro/Firebird
Throttle positionGM (Delphi SS10382)Cross-ref: Delphi SS10382Low confidence23potentiometer (cable throttle)1998-2002 Camaro, 1999-2001 truckSupplier number only; GM number not captured

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank trigger24x reluctorsensor type not stated by source1997-2005 Corvette, 1998-2002 Camaro, 1999-2007 SilveradoSourced · medium20212223
Cam sensorOEM sensor GM 19420911repl 12561211, 194203721999-2004 Corvette, 1999-2002 Camaro, 1999-2007 Silverado; 1997-98 cars GM 12560229Sourced · medium20212223
Valve timingnonepushrodResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF+MAP (blended / torque model). GM 1997 diagnostic doc (per search excerpt; direct fetch 403) has MAF rationality test vs speed-density calculation, i.e. MAF primary with MAP model cross-check. 'Blended' label is inference; O2 type/count not sourced (left blank).Low342427

Factory oxygen sensors

Downstream O2 sensors: yes.Low342427

Injector drive

Factory injector impedance: high (saturated). Connector: EV1 / Jetronic.Medium101169

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

Stock rods and cast pistons are the commonly cited weak points under boost. EngineLabs notes cast-piston ring lands and stock head bolts as concerns, and builders gap the rings or fit head studs.Medium424275

Common first upgrades (reported)

Builders most often report upgrading: forged rods and pistons; head studs/ARP bolts; opened ring gaps (EngineLabs, 8020).Medium424275

Valvetrain, factory engine management and weak points across every generation are on the GM LS (Gen III / IV) guide.

Vehicles with the LS1

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

28 sources
  1. Factory ratings: GM LS family (Gen III/IV) (E-701) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Factory ratings: GM LT family (Gen V, incl. DFM trucks) (E-702) · poweredsolutions.gm.com · oem · retrieved 2026-10-25
  3. GM LS1 MAF/MAP (E-802) · gsitlc.ext.gm.com · reference · retrieved 2026-10-25
  4. GM LS Gen III/IV internals (E-1000) · en.wikipedia.org · reference · retrieved 2026-10-25
  5. LS1 block/bottom end (E-1001) · australiancar.reviews · press · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injector aftermarket fitment (E-1203) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  9. Injector aftermarket fitment (E-1204) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  10. OEM injector (E-1209) · onallcylinders.com · press · retrieved 2026-10-25
  11. OEM injector (E-1210) · enginelabs.com · press · retrieved 2026-10-25
  12. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. Injectors / ID2600-XDS fitment (E-1233) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  15. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  16. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  17. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  18. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  19. Injector Dynamics ID2600-XDS fitment table (E-1292) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  20. OEM sensors GM Camaro (E-1320) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  21. OEM sensors GM Corvette (E-1321) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  22. OEM sensors GM Silverado (E-1322) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  23. GM sensors retailer catalogue (E-1326) · michiganmotorsports.com · reference · retrieved 2026-10-25
  24. LS swap pillar: GM LS engine reference (E-3003) · en.wikipedia.org · reference · retrieved 2026-10-27
  25. Swap: LS swap C10 (E-3713) · en.wikipedia.org · reference · retrieved 2026-10-27
  26. Firing order: GM Gen III/IV LS and Gen V LT V8 (E-4800) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
  27. Track builds: ls-swap-drag-build (E-15518) · en.wikipedia.org · reference · retrieved 2026-11-04
  28. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.