Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
LS6 horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
LS6 firing order
The order the cylinders fire in, with the cylinder numbering the source states.
- 1
- 8
- 7
- 2
- 6
- 5
- 4
- 3
- Medium25Sourced · medium
LS6 injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Fuel Injector Clinic (FIC) FIC 525cc High-Z injector set · IS301-0525H27 | 525 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Needs adapter harness plug change; FIC set includes USCAR pigtails (PGTUSC8) or optional plug-and-play adapters PADPUtoJ8 |
| Fuel Injector Clinic (FIC) FIC 1200cc High-Z injector set · IS301-1200H27 | 1200 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Injector Dynamics ID1050-XDS (set) · 1050.60.14.14.86111416 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
| Injector Dynamics ID1300-XDS (set) · 1300.60.14.14.87121517 | 1335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
| Injector Dynamics ID2600-XDS (set) · 2600.60.14.14.88131518 | 2600 cc/min cc/min @ 3.0 bar (43.5 psi) (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
LS6 swap
Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position | GM 12560228 (repl 12555566)Cross-ref: NTK EH0157Sourced · medium19202122 | 24x reluctor (sensor type not stated by source) · 24x | 1997-2005 Corvette, 1998-2002 Camaro, 1999-2007 Silverado |
| Cam position | GM 19420911 (repl 12561211, 19420372)Cross-ref: NTK EC0099Sourced · medium19202122 | Not yet sourced | 1999-2004 Corvette, 1999-2002 Camaro, 1999-2007 Silverado; 1997-98 cars GM 12560229 |
| Knock × 2 (sold as pair) | GM 12589867 (repl 10456603); MM notes possible supersession to 12601822Sourced · medium19202122 | Not yet sourced | 1998-2002 Camaro/Firebird, 1998-2004 Corvette, 1999-2007 Silverado 4.8/5.3/6.0Valley-mounted per MM listing (intake valley) |
| MAP | GM 19418807Sourced · medium20 | Not yet sourced | 1997-2008 Corvette 5.7/6.0/7.0 |
| MAF | GM 19330122 (repl 25341604)Sourced · medium20 | Not yet sourced | 2002-04 Corvette 5.72001 Z06 MAF not captured |
| O2 (upstream) | GM 19178930 (1997-2003) | GM 12569429 (2004 front)Sourced · medium20 | Not yet sourced | Corvette |
| Coolant temp | GM 12608814 | GM 19236568 (ACDelco 213-4514)Cross-ref: ACDelco 213-4514Sourced · medium22 | Not yet sourced | LS 1999-2018 (12608814); LS 4.8-6.2 (19236568) |
Ignition and triggers
Tuning notes
Factory load sensing
The factory ECU measures load by MAF+MAP (blended / torque model). Wikipedia: LS6 got higher-flow MAF. Same Gen III PCM strategy as LS1 (inferred).Low423263
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Same as LS1: stock powder-metal rods and hypereutectic pistons are cited as the first limits under boost. The LS6 block is regarded as stronger at the main webs.Medium423265
Common first upgrades (reported)
Builders most often report upgrading: forged rods and pistons; head studs (general LS practice per EngineLabs/8020).Medium423265
Valvetrain, factory engine management and weak points across every generation are on the GM LS (Gen III / IV) guide.
Vehicles with the LS6
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
27 sources
- Factory ratings: GM LS family (Gen III/IV) (E-701) · en.wikipedia.org · reference · retrieved 2026-10-25
- Factory ratings: GM LT family (Gen V, incl. DFM trucks) (E-702) · poweredsolutions.gm.com · oem · retrieved 2026-10-25
- GM LS1 MAF/MAP (E-802) · gsitlc.ext.gm.com · reference · retrieved 2026-10-25
- GM LS Gen III/IV internals (E-1000) · en.wikipedia.org · reference · retrieved 2026-10-25
- LS1 block/bottom end (E-1001) · australiancar.reviews · press · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1203) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1204) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- OEM injector (E-1209) · onallcylinders.com · press · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID2600-XDS fitment (E-1233) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID2600-XDS fitment table (E-1292) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- OEM sensors GM Camaro (E-1320) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM sensors GM Corvette (E-1321) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM sensors GM Silverado (E-1322) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
- GM sensors retailer catalogue (E-1326) · michiganmotorsports.com · reference · retrieved 2026-10-25
- LS swap pillar: GM LS engine reference (E-3003) · en.wikipedia.org · reference · retrieved 2026-10-27
- Swap: LS swap C10 (E-3713) · en.wikipedia.org · reference · retrieved 2026-10-27
- Firing order: GM Gen III/IV LS and Gen V LT V8 (E-4800) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
- Track builds: ls-swap-drag-build (E-15518) · en.wikipedia.org · reference · retrieved 2026-11-04
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.

