Aptiv (formerly Delphi)

Aptiv Metri-Pack connectors

Metri-PackDelphi Metri-PackMetri-Pack 150 / 280 / 480 / 630 / 800

A Metri-Pack connector is Aptiv's blade-terminal connector system, sold in 150, 280, 480, 630 and 800 series. The series number tracks the male blade width, from 1.5 mm on the 150 to 6.3 mm on the 630. Aptiv rates the range from 14 A (150) to 60 A (800) at up to 125 °C, in sealed and unsealed 1 to 16-way housings.1234

At a glance

Series150, 280, 480, 630, 800Sourced1
Ways1 to 16Sourced1
Current range14 A (150) up to 60 A (800) maximumSourced1
Temperature-40 to 125°C-40 to 257 °FSourced21
SealingSealed (cable-sealed) and unsealed versionsSourced12
PlatingTin, silver or goldSourced1
StandardSAE J2030 compliant with silver interface platingSourced12
Locking
  • TPA
  • CPA optional on 150 unsealed
Sourced2

What a Metri-Pack connector is

Metri-Pack is a family of blade-and-receptacle connectors from Aptiv, the former Delphi connection systems business.

Each series uses one blade size, and the series number gives that width: 150 is a 1.5 mm blade, 280 is 2.8 mm, 630 is 6.3 mm.2346

Housings come inline, as headers and in mixed layouts. Sealed versions seal each cable with a silicone seal; unsealed 150 housings are rated sealing class S1.125

Metri-Pack series compared

Pick the series by current first, then by wire size.

Series figures from Aptiv and distributor series pages. Blank cells were not confirmed.Medium12354
SeriesBladeMax currentWire rangeCentreline (unsealed / sealed)
1501.5 mm14 ANot confirmed3.5 mm / not confirmed
2802.8 mm30 A0.35-5 mm²5 mm / 7.7 mm
480Not confirmed42 ANot confirmedNot confirmed
6306.3 mm46 A0.5-5 mm²8.5 mm / 10.8 mm
800Not confirmed60 ANot confirmedNot confirmed

150 and 800 currents from Aptiv; 280 and 630 from Mouser series pages; 480 from Waytek. Mouser and Waytek pages were read through search summaries because the pages did not load directly.

Ratings below are series maximums; the terminal and wire set the real limit.Medium1

Metri-Pack 150 example parts and tools

Aptiv's 150 unsealed datasheet gives representative housings with their mates and TPA locks.

Metri-Pack 150 unsealed examples (Aptiv datasheet) and tooling (Delphi catalog).26
ItemPart numberDetail
2-way female housing12047662Mates 12047663; TPA 12047664
3-way female housing12047781Mates 12047782; TPA 12047783
4-way female housing12047785Mates 12047786; TPA 15324070 (2 required)
Crimp tool12039500Unsealed 150 Metri-Pack, 150.1 and 150.2 pull-to-seat; 0.35-1.0 mm²

A crimp tool from the Delphi catalog covers the 150 series.26

How to assemble a Metri-Pack connector

Choose the terminal for your wire size and plating, crimp core and insulation together with the matching tool, then seat it until the lock tang engages.Medium6

Pull-to-seat 150 terminals are threaded through the housing before crimping, then pulled back into the cavity. Close the TPA last; it only closes with every terminal seated.Medium62

Where Metri-Pack is used

Aptiv lists body and chassis wiring, inline and device connections, trucks, construction, agriculture and robotics for the 150 unsealed series, and markets the range for marine use.21

Common mistakes

Mixing series.

Each series uses its own blade width, so match terminals, seals and housings by series number.Low32

Using an unsealed 150 housing in a wet area. Unsealed means sealing class S1; use a sealed housing with cable seals where water can reach it.21

CAD and drawings

  • Application specCrimp information sheets, Metri-Pack 150 sealed terminals (Delphi, distributor-hosted) · 12048074-CSMedium78910Download from Delphi ↗No login at last check; the maker may change this
  • Application specCrimp information sheets, Metri-Pack 280 sealed terminals (Delphi, distributor-hosted) · 12077411-CSMedium1112131415Download from Delphi ↗No login at last check; the maker may change this

We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.

Crimp and assembly quick card

Strip lengthTBCNot on the crimp information sheetsTBCResearched, unverified
Crimp height
  • SAE thin-wall cable (type 1005), conductor crimp height ±0.05 mm. 150 sealed: 12048074 0.5/0.8/1.0 mm² 1.10/1.20/1.35
  • 12045773 1.25/1.30/1.40
  • 12077628 0.35/0.5 mm² 1.10/1.15
  • 12160222 (Ag) 0.90/0.95. 280 sealed: 12084201 0.35/0.5 mm² 1.15/1.30
  • 12077411 0.5/0.8/1.0 mm² 1.35/1.40/1.55
  • 12048159 1.20/1.30/1.40
  • 12077412 1.0/2.0 mm² 1.50/1.65
  • 12129493 2.0/3.0 mm² 1.70/1.95
Sourced789101112131415
Pull-out force (minimum)
  • Tear-out min (SAE cable): 0.35 mm² 55 N
  • 0.5 mm² 80 N
  • 0.8 mm² 90 N
  • 1.0 mm² 120 N
  • 2.0 mm² 200 N
  • 3.0 mm² 250 N
Sourced789101112131415
Application spec

Delphi crimp information sheet per terminal part number (e.g. 12048074-CS, 12077411-CS)

Sourced789101112131415

Assembly

  1. Choose the cable seal for the series and insulation OD (150 and 280 use different seals) and slide it on before stripping.Medium1618
  2. Crimp and check the conductor crimp height for your exact terminal and cable type on its crimp sheet; Delphi says all crimp dimensions are critical.78910111213141516
  3. Plug every unused cavity: 12059168 on 150 sealed, 12010300 on 280 sealed.1618

Removal

  1. Use Aptiv removal tool 12094429 for 150 and 280 series terminals.Medium20

Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →

Kit parts for this family

ItemPart numberDescriptionWireQtySource
Terminal12077628 / 12045773 (pins), 12084200 / 12048074 (sockets)150 sealed tin terminals 0.35-0.5 / 0.8-1.0 mm²; silver/nickel sockets 12160222 / 121602230.35-1.0 mm²1 per wire1716
Terminal12124977 / 12048159 / 12129497 / 12048254 (pins); 12084201 / 12077411 / 12077412 / 12129493 / 12077413 (sockets)280 sealed tin terminals 0.35-0.5, 0.8-1.0, 1.0-2.0, 2.0-3.0, 5.0 mm²; silver sockets 12176390 / 12176389 / 33231919 / 12176388 / 121763870.35-5.0 mm²1 per wireMedium19
Seal15324976 (reel 12089442)150 cable seal, white, 1.60-2.15 mm1.60-2.15 mm OD1 per wire1617
Seal15324973 (reel 12052924)150 cable seal, dark red, 2.03-2.85 mm2.03-2.85 mm OD1 per wire1617
Seal15324974 (reel 12052925)150 cable seal, blue, 1.29-1.70 mm1.29-1.70 mm OD1 per wire1617
Seal15324983 / 15324985 / 15324984 / 15324982 / 15324980 / 15324981280 cable seals 1.29-1.70 / 1.60-2.15 / 2.03-2.42 / 2.03-2.85 / 2.81-3.49 / 3.45-4.30 mm (same set as Weather Pack)1.29-4.30 mm OD1 per wire1819
Cavity plug12059168150 cavity plug, dark red, 5.2 mm cavityAllper unused cavity16
Cavity plug12010300280 cavity plug, green, 6.7 mmAllper unused cavity1819
Removal tool12094429Metri-Pack 150/280 terminal removal toolAll1Medium20

Where it's used

Our harness designs

Not used in our current harness designs.

Sensors that mate with it

Factory (OEM) use

No factory ECU in our pinout library uses this connector family.

Frequently asked

What does the number in Metri-Pack 150 or 280 mean?

It is the male blade width in hundredths of a millimetre. Metri-Pack 150 uses a 1.5 mm blade, 280 uses a 2.8 mm blade and 630 uses a 6.3 mm blade. Wider blades carry more current, so the number is also a rough guide to the series rating.234

How many amps is a Metri-Pack connector rated for?

It depends on the series. Aptiv rates the 150 series at 14 A and the 800 series at 60 A maximum. Distributor series pages list 30 A for the 280, 42 A for the 480 and 46 A for the 630. The terminal, wire gauge and ambient temperature set the usable figure.Medium1354

Are Metri-Pack connectors sealed?

Both types exist. Sealed Metri-Pack housings use a silicone cable seal on every wire, while unsealed versions such as the 150 unsealed series carry sealing class S1 and suit dry locations. Check the housing part number, because sealed and unsealed housings of the same series do not share seals.Medium125

What crimp tool do Metri-Pack terminals need?

Use the tool listed for the series and terminal. The Delphi catalog lists 12039500 for unsealed 150 Metri-Pack, 150.1 and 150.2 pull-to-seat terminals, covering 0.35-1.0 mm² wire. Larger series use different dies, so look up the tool by terminal part number before you buy.Medium6

Keep going

Related

Sources

20 sources
  1. Connectors for Marine Applications (2025) · Aptiv · vendor-doc · retrieved 2026-10-27
  2. Metri-Pack (M/P) 150 Unsealed Series data sheet · Aptiv · vendor-doc · retrieved 2026-10-27
  3. Aptiv Metri-Pack 280 Connectors · Mouser Electronics · vendor-doc · retrieved 2026-10-27
  4. Aptiv Metri-Pack 630 Connectors · Mouser Electronics · vendor-doc · retrieved 2026-10-27
  5. Aptiv Metri-Pack 480 Series · Waytek · vendor-doc · retrieved 2026-10-27
  6. Delphi connection systems catalog, Tooling: crimp tools (p. 10.6, distributor-hosted) · Delphi (now Aptiv), hosted by Chip and Dip · vendor-doc · retrieved 2026-10-27
  7. Crimp Information Sheet 12048074 (Metri-Pack 150 sealed female 0.8-1.0 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  8. Crimp Information Sheet 12045773 (Metri-Pack 150 sealed male 0.8-1.0 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  9. Crimp Information Sheet 12077628 (Metri-Pack 150 sealed male 0.35-0.5 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  10. Crimp Information Sheet 12160222 (Metri-Pack 150 sealed female 0.35-0.5 mm2, Ag), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  11. Crimp Information Sheet 12077411 (Metri-Pack 280 sealed female 0.8-1.0 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  12. Crimp Information Sheet 12077412 (Metri-Pack 280 sealed female 1.0-2.0 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  13. Crimp Information Sheet 12129493 (Metri-Pack 280 sealed female 2.0-3.0 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  14. Crimp Information Sheet 12048159 (Metri-Pack 280 sealed male 0.8-1.0 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  15. Crimp Information Sheet 12084201 (Metri-Pack 280 sealed female 0.35-0.5 mm2), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  16. 150 Metri-Pack sealed catalog pages (Delphi), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  17. Metri-Pack 150 rear insert, sealed: category page · Corsa-Technic · vendor-doc · retrieved 2026-10-28
  18. 280 Metri-Pack sealed catalog pages (Delphi), distributor-hosted · Delphi (Aptiv), hosted by Corsa-Technic · vendor-doc · retrieved 2026-10-28
  19. Metri-Pack 280 rear insert, sealed: category page · Corsa-Technic · vendor-doc · retrieved 2026-10-28
  20. Aptiv 12094429 Metri-Pack terminal removal tool · Waytek · vendor-doc · retrieved 2026-10-28

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.