TE Connectivity (Deutsch) · Deutsch DTM

DTM04-4P: Deutsch DTM 4-way receptacle (pin contacts)

DTM04-4P-E004Deutsch DTM 4-way receptacle

DTM04-4P is the grey 4-way receptacle in the Deutsch DTM series. It carries four size 20 pin contacts in two rows, mates with the DTM06-4S plug and takes a WM-4P wedge lock sold separately. TE rates each contact at 7.5 A and the housing at -55 to 125 °C, sealed to IP68 and IP6K9K with all cavities filled.13

4-wayReceptacle, pin contacts
DTM06-4SMates with
WM-4PWedge / secondary lock
7.5 A maximumCurrent
16-20 AWGWire range Sources disagree

DTM04-4P cavity layout

latch1423
Wire side, latch up. Cavities 1 and 4 on top, 2 and 3 below. The mating face is the wire-side grid mirrored left to right (latch still up), derived by us. Drawn from the cavity numbers; not to scale.

3 Cavity numbers per the TE customer drawing end view of the receptacle.

Contact sizeSize 20 pins, 1.0 mm diameter0.04 inSourced13
Length43.69mm1.720 inSourced3
Width19.20mm0.756 inSourced3
Height19.61mm0.772 inSourced3
Tolerance±0.64 mm unless stated±0.025 inSourced3

CAD and drawings

We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.

Complete kit by wire size

Everything to terminate one DTM04-4P: pick the terminal for your wire size and plating. Lines marked Unverified or TBC need checking against the maker's current drawing before you order.

20 AWG (0.5 mm²) · Nickel · solid
ItemPart numberDescriptionQtySource
HousingDTM04-4P4-way receptacle113
Wedge / TPAWM-4PWedge lock / secondary lockSecondary wedge lock, sold separately.13
Terminal0460-202-20141pin, solid (machined), indent crimp, NickelTE lists 7.5 A typical, -55 to 125 °C.4 (1 per wire)5
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4P-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-025-0405PA66 receptacle backshell for DTM04-4P / DTMH04-4P, 7.5 or 8.5 mm tubing (TE also lists 1028-026-0405 for 8.5 mm and 1028-027-0405 for 7.5/8.5 mm)TE's table groups DTM04-4P and DTMH04-4P without saying which of the three suits which; check the customer drawing.1 (optional)Medium16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11120
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-18 AWG (0.75-1.5 mm²) · Nickel · solid
ItemPart numberDescriptionQtySource
HousingDTM04-4P4-way receptacle113
Wedge / TPAWM-4PWedge lock / secondary lockSecondary wedge lock, sold separately.13
Terminal0460-010-20141pin, solid (machined), indent crimp, NickelSize 20 pin with a larger wire barrel; 7.5 A typical.4 (1 per wire)6
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4P-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-025-0405PA66 receptacle backshell for DTM04-4P / DTMH04-4P, 7.5 or 8.5 mm tubing (TE also lists 1028-026-0405 for 8.5 mm and 1028-027-0405 for 7.5/8.5 mm)TE's table groups DTM04-4P and DTMH04-4P without saying which of the three suits which; check the customer drawing.1 (optional)Medium16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11120
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
20 AWG (0.5 mm²) · Gold (interface and crimp area) · solid
ItemPart numberDescriptionQtySource
HousingDTM04-4P4-way receptacle113
Wedge / TPAWM-4PWedge lock / secondary lockSecondary wedge lock, sold separately.13
Terminal0460-202-2031pin, solid (machined), indent crimp, Gold (interface and crimp area)7.5 A typical; TE lists -55 to 150 °C for the contact.4 (1 per wire)7
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4P-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-025-0405PA66 receptacle backshell for DTM04-4P / DTMH04-4P, 7.5 or 8.5 mm tubing (TE also lists 1028-026-0405 for 8.5 mm and 1028-027-0405 for 7.5/8.5 mm)TE's table groups DTM04-4P and DTMH04-4P without saying which of the three suits which; check the customer drawing.1 (optional)Medium16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11120
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-22 AWG (0.35-1.5 mm²) · Nickel · stamped
ItemPart numberDescriptionQtySource
HousingDTM04-4P4-way receptacle113
Wedge / TPAWM-4PWedge lock / secondary lockSecondary wedge lock, sold separately.13
Terminal1060-20-0122pin, stamped and formed, F-crimp (open barrel), NickelInsulation diameter 1.9-3.2 mm; reel packed.4 (1 per wire)8
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4P-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-025-0405PA66 receptacle backshell for DTM04-4P / DTMH04-4P, 7.5 or 8.5 mm tubing (TE also lists 1028-026-0405 for 8.5 mm and 1028-027-0405 for 7.5/8.5 mm)TE's table groups DTM04-4P and DTMH04-4P without saying which of the three suits which; check the customer drawing.1 (optional)Medium16
Crimp tool2391435-1Current TE hand crimp tool for stamped size 20 contacts 1060/1062-20-01 and 1062-20-03114-151003 rev J1 names this tool; DTT-20-00 is marked superseded by TE. Instruction sheet 408-35200.11928
Crimp toolDTT-20-00Size 20 hand crimp tool (straight action)TE marks it superseded and does not state the contact style; distributors sell it for size 20 stamped and formed contacts.1Medium12
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-22 AWG (0.35-1.5 mm²) · Gold interface, tin crimp area · stamped
ItemPart numberDescriptionQtySource
HousingDTM04-4P4-way receptacle113
Wedge / TPAWM-4PWedge lock / secondary lockSecondary wedge lock, sold separately.13
Terminal1060-20-0144pin, stamped and formed, F-crimp (open barrel), Gold interface, tin crimp areaInsulation diameter 1.9-3.2 mm.4 (1 per wire)9
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4P-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-025-0405PA66 receptacle backshell for DTM04-4P / DTMH04-4P, 7.5 or 8.5 mm tubing (TE also lists 1028-026-0405 for 8.5 mm and 1028-027-0405 for 7.5/8.5 mm)TE's table groups DTM04-4P and DTMH04-4P without saying which of the three suits which; check the customer drawing.1 (optional)Medium16
Crimp tool2391435-1Current TE hand crimp tool for stamped size 20 contacts 1060/1062-20-01 and 1062-20-03114-151003 rev J1 names this tool; DTT-20-00 is marked superseded by TE. Instruction sheet 408-35200.11928
Crimp toolDTT-20-00Size 20 hand crimp tool (straight action)TE marks it superseded and does not state the contact style; distributors sell it for size 20 stamped and formed contacts.1Medium12
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16

Mating part and wedge

Mates withDTM06-4S 3The drawing says it mates with DTM06-4S and all its modifications.
Wedge lockWM-4P 3Secondary wedge lock, sold separately.
Sealing plug, size 20 (fills an unused cavity)0413-204-2005 UnverifiedMedium10TE lists it as a size 20 sealing plug tagged to HD30/HDP20; DTM fit is stated by distributors, not on TE's page.

Contacts by wire size and plating

Part numberTypeWirePlatingSource
0460-202-20141pin, solid (machined), indent crimp20 AWG (0.5 mm²)Nickel5TE lists 7.5 A typical, -55 to 125 °C.
0460-010-20141pin, solid (machined), indent crimp16-18 AWG (0.75-1.5 mm²)Nickel6Size 20 pin with a larger wire barrel; 7.5 A typical.
0460-202-2031pin, solid (machined), indent crimp20 AWG (0.5 mm²)Gold (interface and crimp area)77.5 A typical; TE lists -55 to 150 °C for the contact.
1060-20-0122pin, stamped and formed, F-crimp (open barrel)16-22 AWG (0.35-1.5 mm²)Nickel8Insulation diameter 1.9-3.2 mm; reel packed.
1060-20-0144pin, stamped and formed, F-crimp (open barrel)16-22 AWG (0.35-1.5 mm²)Gold interface, tin crimp area9Insulation diameter 1.9-3.2 mm.

Ratings and specifications

Contact sizeSize 20 pins, 1.0 mm diameter0.04 inSourced13
Insulation OD1.35-3.05mm0.053-0.120 inSourced31
Wire range
  • 16-20 AWG on the drawing1.0-0.5 mm²
  • 14-22 AWG in TE's DTM series FAQ2.50-0.35 mm²
The drawing marks its range as reference only. The real limit is the contact: 20 AWG or 16-18 AWG for solid pins, 16-22 AWG for stamped pins.Conflict314
Current rating7.5 A maximum per contactSourced1
Operating voltage250V AC/DCSourced1
Temperature-55 to 125°C-67 to 257 °FSourced1
SealingIP68 and IP6K9KsealableSourced1
Housing
  • PA66 GF15, grey, UL 94V-0
  • Rubber grommet
Sourced13
Pitch3.81 mm centreline, 4.19 mm row to row0.15 in · 0.165 inTE's DTM04-4P page lists 3.81 mm centreline, while the mating DTM06-4S page lists 4.19 mm for both directions. Mating parts must share one grid, so one listing is likely wrong; check the drawing before laying out a panel cut-out.Conflict12
Terminal position assuranceYesWM-4P wedgeSourced13

Crimp and removal tools

JobPart numberTool
crimpHDT-48-00Hand crimp tool for solid contacts, sizes 12, 16 and 20 (four-indent closed barrel) 11
crimpDTT-20-00Size 20 hand crimp tool (straight action) Medium12TE marks it superseded and does not state the contact style; distributors sell it for size 20 stamped and formed contacts.
removal0411-240-2005Size 20 contact removal tool Medium13

How to choose and check a crimp tool →

Crimp and assembly quick card

Shared by every Deutsch DTM housing: the values belong to the contacts, not the housing.

Strip length

Solid size 20 (0460-202-20141, 0462-201-20141, 0460-010-20141, 0462-005-20141): 3.96-5.54 mm (0.156-0.218 in). Stamped size 20 (1060/1062-20-01xx): 4.45 +/- 0.64 mm (0.175 +/- 0.025 in) per the DTT-20-00 guide.

114-151003 gives the stamped strip length only in a figure that could not be extracted; the legacy 2009 Deutsch manual gives 3.81-5.08 mm, consistent with the DTT-20-00 guide.Sourced182021
Crimp height
  • Stamped 1060/1062-20-01xx and 1062-20-03 (wire barrel): 16 AWG 1.22-1.30 mm
  • 18 AWG 1.19-1.27 mm
  • 20 AWG 0.94-1.02 mm
  • 22 AWG 0.89-0.97 mm
  • Crimp width 1.80-1.98 mm (insulation OD 1.91-3.18 mm). Solid contacts on HDT-48-00 (reference only, validate by pull test): 0460-202-20/0462-201-20 at 20 AWG 0.73-0.82 mm lock indent, 0.95-1.02 mm entry indent
  • 0460-010-20/0462-005-20 at 16 AWG 0.90-0.98 / 1.06-1.22 mm, at 18 AWG 0.79-0.90 / 1.03-1.10 mm.
Sourced1918
Pull-out force (minimum)
  • Stamped size 20: 14-18 AWG 89 N20 lbf
  • 20 AWG 67 N15 lbf
  • 22 AWG 22 N. Solid size 20: 89 N at 16, 18 and 20 AWG per 114-151004 rev E15 lbf · 20 lbf
  • 108-151004 rev E gives 156 N at 16 AWG, 111 N at 18 AWG and 67 N at 20 AWG. Contact retention in the housing: 89 N minimum.20 lbf
TE's two solid-contact documents disagree for size 20. Until TE confirms, take the higher figure per wire size as the pass mark (16 AWG 156 N, 18 AWG 111 N, 20 AWG 89 N).ConflictMedium221823
Application spec

Connector: 114-151010 rev D2. Contacts: 114-151004 rev E1 (solid 0460/0462-xxx-20), 114-151003 rev J1 (stamped 1060/1062-20-01). Tools: 0425-071-0000 rev D (HDT-48-00), 0425-072-0000 rev A (DTT-20-00).

Sourced1618192021

Assembly

  1. Check the insulation OD is within the DTM seal range of 1.35-3.05 mm (16-20 AWG).16
  2. Strip the wire to the length for the contact type and check for damaged strands.182021
  3. Solid contacts: set the HDT-48-00 dial to the wire size, insert the wire until strands show in the inspection hole with a 0.63-2.54 mm gap to the insulation, and close the handles until the ratchet releases.2018
  4. Stamped contacts: seat the contact fully in the locator of the cavity marked for the wire size, insert the wire and close the tool until the ratchet releases.2119
  5. Inspect the crimp: all strands captured, no broken strands, mating end undamaged.1819
  6. Hold the contact about 25 mm behind the crimp barrel, grommet towards you, and push straight in until it stops and locks. Tug the wire lightly to confirm. For 20 AWG and smaller wire, insertion tool M15570-20 may help.16
  7. Fit a sealing plug in every unused cavity; it should sit flush with the cavity opening, not pushed through.16
  8. Push the wedge lock in until it snaps into the locked position (pliers can help on receptacles; plugs by hand).16
  9. Mate until there is an audible and tactile click, then check the latch is fully engaged.16

Removal

  1. Unmate: press the plug latch to its stop and pull the halves apart.16
  2. Grip the wedge lock with small long-nose pliers (or the DT-RT1 hook) and pull it straight out. Avoid damaging its inner ribs if it will be reused.1624
  3. Push the DT-RT1 screwdriver tip or a small flat screwdriver into the contact's cavity to release the locking finger.1624
  4. Pull the wire until the contact comes out, holding the rear grommet in place if the housing has no end cap.16
  5. If the grommet came out, inspect it for cuts or cracks and replace it if damaged.16

Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →

Where it's used

Our harness designs

Not used in our current harness designs.

Sensors that mate with it

No sensor in our sensor library lists this connector yet.

Factory (OEM) use

No factory ECU in our pinout library uses this connector family.

Commonly used for

Assembly notes

Push each crimped pin in from the wire side until it clicks, then fit the WM-4P wedge from the mating face.

If the wedge will not seat, one pin is not fully home.Medium3

The receptacle carries the sleeve retainer and interfacial seal on its mating face. Keep that seal clean and in place, because it is what seals the joint once the plug latches.Medium314

Frequently asked

What mates with DTM04-4P?

DTM04-4P mates with the DTM06-4S plug, which holds four size 20 socket contacts. TE's drawing states that the receptacle pairs with every modification of DTM06-4S, so suffix variants with different end caps still connect. The two housings latch together with the integrated latch on the plug side.3

Which wedge lock does DTM04-4P use?

DTM04-4P uses the WM-4P wedge lock, sold separately from the housing. The mating DTM06-4S plug uses WM-4S instead, so order one of each for a pair. Insert all four pins first, then push the wedge in; it holds the pins in place and only closes when every pin is seated.34

Which pins fit DTM04-4P?

DTM04-4P takes size 20 Deutsch pins. TE lists solid nickel 0460-202-20141 for 20 AWG and 0460-010-20141 for 16-18 AWG, gold 0460-202-2031 for 20 AWG, and stamped 1060-20-0122 (nickel) or 1060-20-0144 (gold) for 16-22 AWG. Every option is rated 7.5 A typical.56789

How much current can a DTM04-4P carry?

TE rates each DTM04-4P contact at 7.5 A maximum, and the housing at 250 V AC or DC. That makes the DTM series a signal and light-load connector. For loads above 7.5 A per circuit, move to a larger contact size such as the size 16 DT series rather than paralleling DTM pins.114

Keep going

Related

Sources

28 sources
  1. DTM04-4P product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  2. DTM06-4S product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  3. Customer drawing DTM04-4P rev A (receptacle, 4 pins, size 20) · TE Connectivity (Deutsch) · vendor-doc · retrieved 2026-10-27
  4. Customer drawing DTM06-4S rev A (plug, 4 sockets, size 20) · TE Connectivity (Deutsch) · vendor-doc · retrieved 2026-10-27
  5. 0460-202-20141 pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  6. 0460-010-20141 pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  7. 0460-202-2031 gold pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  8. 1060-20-0122 stamped pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  9. 1060-20-0144 stamped gold pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  10. 0413-204-2005 sealing plug, size 20 · TE Connectivity · vendor-doc · retrieved 2026-10-27
  11. HDT-48-00 hand crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  12. DTT-20-00 crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  13. 0411-240-2005 extraction tool, size 20 · element14 / Farnell · vendor-doc · retrieved 2026-10-27
  14. DEUTSCH DTM connectors FAQ · TE Connectivity · vendor-doc · retrieved 2026-10-27
  15. DTM04-4P product page (documents tab) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  16. Application Specification 114-151010 DEUTSCH DTM Series Connector System, rev D2 (23 Sep 2025) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  17. internal GAINS internal: GAINS universal harness designs v1: Single Controller and IO Module harness build scripts, connector lists and wire lists (pre-release, not yet built)
  18. Application Specification 114-151004 DEUTSCH Size 4-20 Solid Pin and Socket Contacts, rev E1 (14 Sep 2022) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  19. Application Specification 114-151003 DEUTSCH Size 20 S&F Pin and Socket Contacts, rev J1 (04 Jun 2026) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  20. Instruction Sheet 0425-071-0000 DEUTSCH Field Maintenance Crimp Tool HDT-48-00, rev D (15 Jan 2018) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  21. Instruction Guide 0425-072-0000 for DTT-20-00, rev A · TE Connectivity · vendor-doc · retrieved 2026-10-27
  22. Product Specification 108-151000 DEUTSCH Stamped and Formed Contacts, rev J (25 Sep 2024) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  23. Product Specification 108-151004 DEUTSCH Solid Contacts (HD), rev E (20 Aug 2020) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  24. Instruction Sheet 408-151008 DEUTSCH Removal Tool DT-RT1 for Front-Release Connectors, rev B (22 Jan 2015) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  25. Application Specification 114-151000 DEUTSCH Size 16 S&F Pin and Socket Contacts, rev R (08 Aug 2025) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  26. Instruction Guide 0425-037-0000 for DTT-16-00, rev D · TE Connectivity · vendor-doc · retrieved 2026-10-27
  27. Product Specification 108-151010 DEUTSCH DTM Series, rev F · TE Connectivity · vendor-doc · retrieved 2026-10-27
  28. 2391435-1 product page (SDE F pin/socket 16-18 hand tool) · TE Connectivity · vendor-doc · retrieved 2026-10-27

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.