TE Connectivity (Deutsch) · Deutsch DTM

DTM04-6P: Deutsch DTM 6-way receptacle (pin contacts)

DTM04-6P-E004Deutsch DTM 6-way receptacle

DTM04-6P is the grey 6-way receptacle in the Deutsch DTM series. It carries six size 20 pin contacts, mates with the DTM06-6S plug and takes the orange WM-6P wedge lock. TE rates each contact at 7.5 A and the housing at -55 to 125 °C, sealed to IP68 and IP6K9K when every cavity is filled or plugged.134

6-wayReceptacle, pin contacts
DTM06-6SMates with
WM-6PWedge / secondary lock
7.5 A maximumCurrent
Set by the contact: 20 AWG or 16-18 AWG solidWire range

DTM04-6P cavity layout

latch162534
Wire side, latch up (expected). Left column 1, 2, 3; right column 6, 5, 4. The mating face is the wire-side grid mirrored left to right (latch still up), derived by us. Drawn from the cavity numbers; not to scale.

Unverified No DTM04-6P drawing was available. This layout is the mirror of the DTM06-6S drawing, which is how the 4-way pair (DTM04-4P and DTM06-4S) behaves. Read the numbers moulded on the housing before wiring.

Contact sizeSize 20 pins, 1.0 mm diameter0.04 inSourced1
Overall length44.9mm1.77 inTE's page calls this 'connector height'. On the DTM04-4P the same field matches the drawing's overall length (43.7 mm), so it is read as length here.Sourced · medium1
Second dimension (TE 'product length')23.8mm0.937 inAxis not stated; no drawing was available to confirm width versus height.Sourced · medium1
Third dimension (TE 'product width')19.2mm0.756 inMatches the 19.20 mm width of DTM04-4P on its drawing.Sourced · medium1

CAD and drawings

We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.

Complete kit by wire size

Everything to terminate one DTM04-6P: pick the terminal for your wire size and plating. Lines marked Unverified or TBC need checking against the maker's current drawing before you order.

20 AWG (0.5 mm²) · Nickel · solid
ItemPart numberDescriptionQtySource
HousingDTM04-6P6-way receptacle1134
Wedge / TPAWM-6PWedge lock / secondary lockTE lists WM-6P as the 6-position DTM receptacle wedge lock (orange PBT). The DTM04-6P page itself does not name the wedge.1Medium4
Terminal0460-202-20141pin, solid (machined), indent crimp, Nickel7.5 A typical.6 (1 per wire)5
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM6P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundlePVC, -29 to +100 C: lower than the connector's 125 C rating.116
BackshellTBCNo receptacle backshell for DTM04-6P is listed in 114-151010 rev D2TBC: ask TE whether a 6-way receptacle backshell exists.TBCUnverifiedMedium16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11119
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11623
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-18 AWG (0.75-1.5 mm²) · Nickel · solid
ItemPart numberDescriptionQtySource
HousingDTM04-6P6-way receptacle1134
Wedge / TPAWM-6PWedge lock / secondary lockTE lists WM-6P as the 6-position DTM receptacle wedge lock (orange PBT). The DTM04-6P page itself does not name the wedge.1Medium4
Terminal0460-010-20141pin, solid (machined), indent crimp, Nickel7.5 A typical.6 (1 per wire)6
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM6P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundlePVC, -29 to +100 C: lower than the connector's 125 C rating.116
BackshellTBCNo receptacle backshell for DTM04-6P is listed in 114-151010 rev D2TBC: ask TE whether a 6-way receptacle backshell exists.TBCUnverifiedMedium16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11119
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11623
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
20 AWG (0.5 mm²) · Gold (interface and crimp area) · solid
ItemPart numberDescriptionQtySource
HousingDTM04-6P6-way receptacle1134
Wedge / TPAWM-6PWedge lock / secondary lockTE lists WM-6P as the 6-position DTM receptacle wedge lock (orange PBT). The DTM04-6P page itself does not name the wedge.1Medium4
Terminal0460-202-2031pin, solid (machined), indent crimp, Gold (interface and crimp area)7.5 A typical; -55 to 150 °C for the contact.6 (1 per wire)7
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM6P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundlePVC, -29 to +100 C: lower than the connector's 125 C rating.116
BackshellTBCNo receptacle backshell for DTM04-6P is listed in 114-151010 rev D2TBC: ask TE whether a 6-way receptacle backshell exists.TBCUnverifiedMedium16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11119
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11623
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-22 AWG (0.35-1.5 mm²) · Nickel · stamped
ItemPart numberDescriptionQtySource
HousingDTM04-6P6-way receptacle1134
Wedge / TPAWM-6PWedge lock / secondary lockTE lists WM-6P as the 6-position DTM receptacle wedge lock (orange PBT). The DTM04-6P page itself does not name the wedge.1Medium4
Terminal1060-20-0122pin, stamped and formed, F-crimp (open barrel), NickelInsulation diameter 1.9-3.2 mm; reel packed.6 (1 per wire)8
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM6P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundlePVC, -29 to +100 C: lower than the connector's 125 C rating.116
BackshellTBCNo receptacle backshell for DTM04-6P is listed in 114-151010 rev D2TBC: ask TE whether a 6-way receptacle backshell exists.TBCUnverifiedMedium16
Crimp tool2391435-1Current TE hand crimp tool for stamped size 20 contacts 1060/1062-20-01 and 1062-20-03114-151003 rev J1 names this tool; DTT-20-00 is marked superseded by TE. Instruction sheet 408-35200.11827
Crimp toolDTT-20-00Size 20 hand crimp tool (straight action)TE marks it superseded and does not state the contact style; distributors sell it for size 20 stamped and formed contacts.1Medium12
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11623
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-22 AWG (0.35-1.5 mm²) · Gold interface, tin crimp area · stamped
ItemPart numberDescriptionQtySource
HousingDTM04-6P6-way receptacle1134
Wedge / TPAWM-6PWedge lock / secondary lockTE lists WM-6P as the 6-position DTM receptacle wedge lock (orange PBT). The DTM04-6P page itself does not name the wedge.1Medium4
Terminal1060-20-0144pin, stamped and formed, F-crimp (open barrel), Gold interface, tin crimp areaInsulation diameter 1.9-3.2 mm.6 (1 per wire)9
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM6P-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundlePVC, -29 to +100 C: lower than the connector's 125 C rating.116
BackshellTBCNo receptacle backshell for DTM04-6P is listed in 114-151010 rev D2TBC: ask TE whether a 6-way receptacle backshell exists.TBCUnverifiedMedium16
Crimp tool2391435-1Current TE hand crimp tool for stamped size 20 contacts 1060/1062-20-01 and 1062-20-03114-151003 rev J1 names this tool; DTT-20-00 is marked superseded by TE. Instruction sheet 408-35200.11827
Crimp toolDTT-20-00Size 20 hand crimp tool (straight action)TE marks it superseded and does not state the contact style; distributors sell it for size 20 stamped and formed contacts.1Medium12
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11623
Removal tool0411-240-2005Size 20 contact removal tool1Medium13
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16

Mating part and wedge

Mates withDTM06-6S 3The DTM06-6S drawing names DTM04-6P and all its modifications as the mate.
Wedge lockWM-6P Medium4TE lists WM-6P as the 6-position DTM receptacle wedge lock (orange PBT). The DTM04-6P page itself does not name the wedge.
Sealing plug, size 20 (fills an unused cavity)0413-204-2005 UnverifiedMedium10TE lists it as a size 20 sealing plug tagged to HD30/HDP20; DTM fit is stated by distributors, not on TE's page.

Contacts by wire size and plating

Part numberTypeWirePlatingSource
0460-202-20141pin, solid (machined), indent crimp20 AWG (0.5 mm²)Nickel57.5 A typical.
0460-010-20141pin, solid (machined), indent crimp16-18 AWG (0.75-1.5 mm²)Nickel67.5 A typical.
0460-202-2031pin, solid (machined), indent crimp20 AWG (0.5 mm²)Gold (interface and crimp area)77.5 A typical; -55 to 150 °C for the contact.
1060-20-0122pin, stamped and formed, F-crimp (open barrel)16-22 AWG (0.35-1.5 mm²)Nickel8Insulation diameter 1.9-3.2 mm; reel packed.
1060-20-0144pin, stamped and formed, F-crimp (open barrel)16-22 AWG (0.35-1.5 mm²)Gold interface, tin crimp area9Insulation diameter 1.9-3.2 mm.

Ratings and specifications

Contact sizeSize 20 pins, 1.0 mm diameter0.04 inSourced1
Insulation OD1.35-3.05mm0.053-0.120 inSourced1
Wire range
  • Set by the contact: 20 AWG or 16-18 AWG solid, 16-22 AWG stamped
  • TE's DTM FAQ gives 14-22 AWG for the series2.50-0.35 mm²
TE's DTM04-6P page gives only the insulation range, not a wire gauge.Sourced · medium1458
Current rating7.5 A maximum per contactSourced1
Operating voltage250V AC/DCSourced1
Temperature-55 to 125°C-67 to 257 °FSourced1
SealingIP68 and IP6K9KsealableSourced1
HousingGrey, UL 94V-0TE's DTM04-6P page does not state the housing material; the DTM FAQ says DTM shells are glass-filled PA.Sourced1
Pitch3.81 mm centreline, 7.11 mm row to row0.15 in · 0.28 inTE's DTM04-6P page lists these values; the mating DTM06-6S page lists 4.19 mm for both directions. Mating parts share one contact grid, so at least one listing is wrong. Use a drawing for panel cut-outs.Conflict12

Crimp and removal tools

JobPart numberTool
crimpHDT-48-00Hand crimp tool for solid contacts, sizes 12, 16 and 20 (four-indent closed barrel) 11
crimpDTT-20-00Size 20 hand crimp tool (straight action) Medium12TE marks it superseded and does not state the contact style; distributors sell it for size 20 stamped and formed contacts.
removal0411-240-2005Size 20 contact removal tool Medium13

How to choose and check a crimp tool →

Crimp and assembly quick card

Shared by every Deutsch DTM housing: the values belong to the contacts, not the housing.

Strip length

Solid size 20 (0460-202-20141, 0462-201-20141, 0460-010-20141, 0462-005-20141): 3.96-5.54 mm (0.156-0.218 in). Stamped size 20 (1060/1062-20-01xx): 4.45 +/- 0.64 mm (0.175 +/- 0.025 in) per the DTT-20-00 guide.

114-151003 gives the stamped strip length only in a figure that could not be extracted; the legacy 2009 Deutsch manual gives 3.81-5.08 mm, consistent with the DTT-20-00 guide.Sourced171920
Crimp height
  • Stamped 1060/1062-20-01xx and 1062-20-03 (wire barrel): 16 AWG 1.22-1.30 mm
  • 18 AWG 1.19-1.27 mm
  • 20 AWG 0.94-1.02 mm
  • 22 AWG 0.89-0.97 mm
  • Crimp width 1.80-1.98 mm (insulation OD 1.91-3.18 mm). Solid contacts on HDT-48-00 (reference only, validate by pull test): 0460-202-20/0462-201-20 at 20 AWG 0.73-0.82 mm lock indent, 0.95-1.02 mm entry indent
  • 0460-010-20/0462-005-20 at 16 AWG 0.90-0.98 / 1.06-1.22 mm, at 18 AWG 0.79-0.90 / 1.03-1.10 mm.
Sourced1817
Pull-out force (minimum)
  • Stamped size 20: 14-18 AWG 89 N20 lbf
  • 20 AWG 67 N15 lbf
  • 22 AWG 22 N. Solid size 20: 89 N at 16, 18 and 20 AWG per 114-151004 rev E15 lbf · 20 lbf
  • 108-151004 rev E gives 156 N at 16 AWG, 111 N at 18 AWG and 67 N at 20 AWG. Contact retention in the housing: 89 N minimum.20 lbf
TE's two solid-contact documents disagree for size 20. Until TE confirms, take the higher figure per wire size as the pass mark (16 AWG 156 N, 18 AWG 111 N, 20 AWG 89 N).ConflictMedium211722
Application spec

Connector: 114-151010 rev D2. Contacts: 114-151004 rev E1 (solid 0460/0462-xxx-20), 114-151003 rev J1 (stamped 1060/1062-20-01). Tools: 0425-071-0000 rev D (HDT-48-00), 0425-072-0000 rev A (DTT-20-00).

Sourced1617181920

Assembly

  1. Check the insulation OD is within the DTM seal range of 1.35-3.05 mm (16-20 AWG).16
  2. Strip the wire to the length for the contact type and check for damaged strands.171920
  3. Solid contacts: set the HDT-48-00 dial to the wire size, insert the wire until strands show in the inspection hole with a 0.63-2.54 mm gap to the insulation, and close the handles until the ratchet releases.1917
  4. Stamped contacts: seat the contact fully in the locator of the cavity marked for the wire size, insert the wire and close the tool until the ratchet releases.2018
  5. Inspect the crimp: all strands captured, no broken strands, mating end undamaged.1718
  6. Hold the contact about 25 mm behind the crimp barrel, grommet towards you, and push straight in until it stops and locks. Tug the wire lightly to confirm. For 20 AWG and smaller wire, insertion tool M15570-20 may help.16
  7. Fit a sealing plug in every unused cavity; it should sit flush with the cavity opening, not pushed through.16
  8. Push the wedge lock in until it snaps into the locked position (pliers can help on receptacles; plugs by hand).16
  9. Mate until there is an audible and tactile click, then check the latch is fully engaged.16

Removal

  1. Unmate: press the plug latch to its stop and pull the halves apart.16
  2. Grip the wedge lock with small long-nose pliers (or the DT-RT1 hook) and pull it straight out. Avoid damaging its inner ribs if it will be reused.1623
  3. Push the DT-RT1 screwdriver tip or a small flat screwdriver into the contact's cavity to release the locking finger.1623
  4. Pull the wire until the contact comes out, holding the rear grommet in place if the housing has no end cap.16
  5. If the grommet came out, inspect it for cuts or cracks and replace it if damaged.16

Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →

Where it's used

Our harness designs

Not used in our current harness designs.

Sensors that mate with it

No sensor in our sensor library lists this connector yet.

Factory (OEM) use

No factory ECU in our pinout library uses this connector family.

Commonly used for

Assembly notes

Load the six pins from the wire side until each clicks, then fit the WM-6P wedge from the mating face.

If it will not close, find the pin that is sitting proud.Medium414

Cavity numbering for this receptacle is not confirmed from a TE drawing here. Read the numbers moulded on the housing and check continuity end to end before you power the circuit.Medium1

Frequently asked

What mates with DTM04-6P?

DTM04-6P mates with the DTM06-6S plug, which holds six size 20 sockets. TE's DTM06-6S drawing names DTM04-6P and all its modifications as the mating receptacle. Order the WM-6P wedge for the receptacle and the WM-6S wedge for the plug, because each housing needs its own wedge.34

Which wedge lock does DTM04-6P use?

DTM04-6P uses the WM-6P wedge lock, which TE describes as a 6-position DTM receptacle wedge in orange PBT, rated -55 to 125 °C. It is sold separately. Fit it only after all six pins have clicked home, because it is the secondary lock that stops pins backing out.Medium4

Which pins fit DTM04-6P?

DTM04-6P takes size 20 Deutsch pins. TE lists solid nickel 0460-202-20141 for 20 AWG and 0460-010-20141 for 16-18 AWG, gold 0460-202-2031 for 20 AWG, and stamped 1060-20-0122 (nickel) or 1060-20-0144 (gold) for 16-22 AWG. All are rated 7.5 A typical.56789

How much current can a DTM04-6P carry?

TE rates each DTM04-6P contact at 7.5 A maximum and the housing at 250 V AC or DC. Six circuits at 7.5 A each is the contact limit, but heat in a closed bundle can lower what is safe in practice. For heavier loads, use a larger contact series such as Deutsch DT.114

Keep going

Related

Sources

27 sources
  1. DTM04-6P product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  2. DTM06-6S product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  3. Customer drawing DTM06-6S rev A (plug, 6 sockets, size 20) · TE Connectivity (Deutsch) · vendor-doc · retrieved 2026-10-27
  4. WM-6P wedge lock product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  5. 0460-202-20141 pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  6. 0460-010-20141 pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  7. 0460-202-2031 gold pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  8. 1060-20-0122 stamped pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  9. 1060-20-0144 stamped gold pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  10. 0413-204-2005 sealing plug, size 20 · TE Connectivity · vendor-doc · retrieved 2026-10-27
  11. HDT-48-00 hand crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  12. DTT-20-00 crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  13. 0411-240-2005 extraction tool, size 20 · element14 / Farnell · vendor-doc · retrieved 2026-10-27
  14. DEUTSCH DTM connectors FAQ · TE Connectivity · vendor-doc · retrieved 2026-10-27
  15. DTM04-6P product page (documents tab) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  16. Application Specification 114-151010 DEUTSCH DTM Series Connector System, rev D2 (23 Sep 2025) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  17. Application Specification 114-151004 DEUTSCH Size 4-20 Solid Pin and Socket Contacts, rev E1 (14 Sep 2022) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  18. Application Specification 114-151003 DEUTSCH Size 20 S&F Pin and Socket Contacts, rev J1 (04 Jun 2026) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  19. Instruction Sheet 0425-071-0000 DEUTSCH Field Maintenance Crimp Tool HDT-48-00, rev D (15 Jan 2018) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  20. Instruction Guide 0425-072-0000 for DTT-20-00, rev A · TE Connectivity · vendor-doc · retrieved 2026-10-27
  21. Product Specification 108-151000 DEUTSCH Stamped and Formed Contacts, rev J (25 Sep 2024) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  22. Product Specification 108-151004 DEUTSCH Solid Contacts (HD), rev E (20 Aug 2020) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  23. Instruction Sheet 408-151008 DEUTSCH Removal Tool DT-RT1 for Front-Release Connectors, rev B (22 Jan 2015) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  24. Application Specification 114-151000 DEUTSCH Size 16 S&F Pin and Socket Contacts, rev R (08 Aug 2025) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  25. Instruction Guide 0425-037-0000 for DTT-16-00, rev D · TE Connectivity · vendor-doc · retrieved 2026-10-27
  26. Product Specification 108-151010 DEUTSCH DTM Series, rev F · TE Connectivity · vendor-doc · retrieved 2026-10-27
  27. 2391435-1 product page (SDE F pin/socket 16-18 hand tool) · TE Connectivity · vendor-doc · retrieved 2026-10-27

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.