TE Connectivity (Deutsch) · Deutsch DTM

DTM06-4S: Deutsch DTM 4-way plug (socket contacts)

DTM06-4S-E004Deutsch DTM 4-way plug

DTM06-4S is the grey 4-way plug in the Deutsch DTM series. It holds four size 20 socket contacts in two rows, mates with the DTM04-4P receptacle and locks its contacts with a WM-4S wedge sold separately. TE rates the contacts at 7.5 A maximum and the housing at -55 to 125 °C, sealed to IP68 and IP6K9K when every cavity is filled.12

4-wayPlug, socket contacts
DTM04-4PMates with
WM-4SWedge / secondary lock
7.5 A maximumCurrent
16-22 AWGWire range Sources disagree

DTM06-4S cavity layout

latch4132
Wire side, latch up. Cavities 4 and 1 on top, 3 and 2 below. The mating face is the wire-side grid mirrored left to right (latch still up), derived by us. Drawn from the cavity numbers; not to scale.

2 Cavity numbers as moulded on the rear of the housing, per the TE customer drawing end view.

Contact size
  • Size 20 sockets
  • Mating pin diameter 1.02 mm0.04 in
Sourced12
Length30.10mm1.185 inSourced2
Width15.24mm0.600 inSourced2
Height (with latch)17.65mm0.695 inSourced2
Tolerance±0.64 mm unless stated±0.025 inSourced2

CAD and drawings

We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.

Complete kit by wire size

Everything to terminate one DTM06-4S: pick the terminal for your wire size and plating. Lines marked Unverified or TBC need checking against the maker's current drawing before you order.

20 AWG (0.5 mm²) · Nickel · solid
ItemPart numberDescriptionQtySource
HousingDTM06-4S4-way plug112
Wedge / TPAWM-4SWedge lock / secondary lockSecondary wedge lock, sold separately.12
Terminal0462-201-20141socket, solid (machined), indent crimp, NickelTE lists 7.5 A typical.4 (1 per wire)4
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4S-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4S-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-008-0405PA66 plug backshell, straight, 8.5 mm tubing1 (optional)16
Backshell1028-016-000590-degree backshell adapter that fits plug backshell 1028-008-04051 (optional)16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11220
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium5
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-18 AWG (0.75-1.5 mm²) · Nickel · solid
ItemPart numberDescriptionQtySource
HousingDTM06-4S4-way plug112
Wedge / TPAWM-4SWedge lock / secondary lockSecondary wedge lock, sold separately.12
Terminal0462-005-20141socket, solid (machined), indent crimp, NickelSize 20 socket with a larger wire barrel. TE lists 7.5 A typical, -55 to 125 °C.4 (1 per wire)6
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4S-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4S-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-008-0405PA66 plug backshell, straight, 8.5 mm tubing1 (optional)16
Backshell1028-016-000590-degree backshell adapter that fits plug backshell 1028-008-04051 (optional)16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11220
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium5
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
20 AWG (0.5 mm²) · Gold (interface and crimp area) · solid
ItemPart numberDescriptionQtySource
HousingDTM06-4S4-way plug112
Wedge / TPAWM-4SWedge lock / secondary lockSecondary wedge lock, sold separately.12
Terminal0462-201-2031socket, solid (machined), indent crimp, Gold (interface and crimp area)TE lists 7.5 A typical and -55 to 150 °C for the contact itself.4 (1 per wire)7
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4S-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4S-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-008-0405PA66 plug backshell, straight, 8.5 mm tubing1 (optional)16
Backshell1028-016-000590-degree backshell adapter that fits plug backshell 1028-008-04051 (optional)16
Crimp toolHDT-48-00Hand crimp tool for solid size 20 contacts11220
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium5
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-22 AWG (0.35-1.5 mm²) · Nickel · stamped
ItemPart numberDescriptionQtySource
HousingDTM06-4S4-way plug112
Wedge / TPAWM-4SWedge lock / secondary lockSecondary wedge lock, sold separately.12
Terminal1062-20-0122socket, stamped and formed, F-crimp (open barrel), NickelTE lists 7.5 A typical and an insulation diameter of 1.9-3.2 mm, sold on reels.4 (1 per wire)9
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4S-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4S-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-008-0405PA66 plug backshell, straight, 8.5 mm tubing1 (optional)16
Backshell1028-016-000590-degree backshell adapter that fits plug backshell 1028-008-04051 (optional)16
Crimp tool2391435-1Current TE hand crimp tool for stamped size 20 contacts 1060/1062-20-01 and 1062-20-03114-151003 rev J1 names this tool; DTT-20-00 is marked superseded by TE. Instruction sheet 408-35200.11928
Crimp toolDTT-20-00Size 20 hand crimp tool (straight action)TE confirms a size 20 hand tool and marks it superseded. Distributors sell it as the tool for size 20 stamped and formed contacts; TE's page does not state the contact style, so check the replacement part with TE.1Medium13
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium5
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16
16-22 AWG (0.35-1.5 mm²) · Gold interface, tin crimp area · stamped
ItemPart numberDescriptionQtySource
HousingDTM06-4S4-way plug112
Wedge / TPAWM-4SWedge lock / secondary lockSecondary wedge lock, sold separately.12
Terminal1062-20-0144socket, stamped and formed, F-crimp (open barrel), Gold interface, tin crimp areaTE lists 7.5 A typical and an insulation diameter of 1.9-3.2 mm.4 (1 per wire)10
Cavity plug0413-204-2005Sealing plug, red PBT, size 20 - the plug TE specifies for DTMResolves the library's 'unverified' flag: TE's DTM application spec names this plug.per unused cavity16
BootDTM4S-BTSlip-on PVC boot, gray; arrives closed, cut the end to suit the bundle (black: DTM4S-BT-BK)PVC, -29 to +100 C: lower than the connector's 125 C rating.116
Backshell1028-008-0405PA66 plug backshell, straight, 8.5 mm tubing1 (optional)16
Backshell1028-016-000590-degree backshell adapter that fits plug backshell 1028-008-04051 (optional)16
Crimp tool2391435-1Current TE hand crimp tool for stamped size 20 contacts 1060/1062-20-01 and 1062-20-03114-151003 rev J1 names this tool; DTT-20-00 is marked superseded by TE. Instruction sheet 408-35200.11928
Crimp toolDTT-20-00Size 20 hand crimp tool (straight action)TE confirms a size 20 hand tool and marks it superseded. Distributors sell it as the tool for size 20 stamped and formed contacts; TE's page does not state the contact style, so check the replacement part with TE.1Medium13
Removal toolDT-RT1Removal tool for front-release connectors (wedge hook + locking-finger screwdriver)11624
Removal tool0411-240-2005Size 20 contact removal tool1Medium5
OtherM15570-20Insertion tool, size 20 (red); may be needed for wire of 20 AWG or smaller116
Other0413-216-2005Keying pin, red PBT (optional, prevents mis-mating)as needed16

Mating part and wedge

Mates withDTM04-4P 2
Wedge lockWM-4S 2Secondary wedge lock, sold separately.
Sealing plug, size 20 (fills an unused cavity)0413-204-2005 UnverifiedMedium11TE lists 0413-204-2005 as a size 20 sealing plug (red, PBT GF30) but tags it to the HD30/HDP20 series. Distributors sell it for DTM; TE's own page does not name DTM, so confirm fit before relying on it.

Contacts by wire size and plating

Part numberTypeWirePlatingSource
0462-201-20141socket, solid (machined), indent crimp20 AWG (0.5 mm²)Nickel4TE lists 7.5 A typical.
0462-005-20141socket, solid (machined), indent crimp16-18 AWG (0.75-1.5 mm²)Nickel6Size 20 socket with a larger wire barrel. TE lists 7.5 A typical, -55 to 125 °C.
0462-201-2031socket, solid (machined), indent crimp20 AWG (0.5 mm²)Gold (interface and crimp area)7TE lists 7.5 A typical and -55 to 150 °C for the contact itself.
1062-20-0122socket, stamped and formed, F-crimp (open barrel)16-22 AWG (0.35-1.5 mm²)Nickel9TE lists 7.5 A typical and an insulation diameter of 1.9-3.2 mm, sold on reels.
1062-20-0144socket, stamped and formed, F-crimp (open barrel)16-22 AWG (0.35-1.5 mm²)Gold interface, tin crimp area10TE lists 7.5 A typical and an insulation diameter of 1.9-3.2 mm.

Ratings and specifications

Contact size
  • Size 20 sockets
  • Mating pin diameter 1.02 mm0.04 in
Sourced12
Insulation OD1.35-3.05mm0.053-0.120 inSourced21
Wire range
  • 16-22 AWG per the DTM06-4S drawing
  • 16-20 AWG on the DTM04-4P and DTM06-6S drawings1.0-0.5 mm²
The DTM06-4S drawing (rev A) prints 16-22 AWG with 1.5-0.5 mm², which does not match its own AWG range; the wire range is set by the contact you choose. Check the contact part number for your gauge.Conflict23
Current rating7.5 A maximum per contactSourced1
Operating voltage250V AC/DCSourced1
Temperature-55 to 125°C-67 to 257 °FSourced1
SealingIP68 and IP6K9KsealableSourced1
Housing
  • Glass-filled polyamide, grey, UL 94V-0
  • Rubber grommet
Sourced12
Pitch4.19 mm centreline and row-to-row0.165 inSourced1

Crimp and removal tools

JobPart numberTool
crimpHDT-48-00Hand crimp tool for solid contacts, sizes 12, 16 and 20 (four-indent closed barrel) 12
crimpDTT-20-00Size 20 hand crimp tool (straight action) Medium13TE confirms a size 20 hand tool and marks it superseded. Distributors sell it as the tool for size 20 stamped and formed contacts; TE's page does not state the contact style, so check the replacement part with TE.
removal0411-240-2005Size 20 contact removal tool Medium5

How to choose and check a crimp tool →

Crimp and assembly quick card

Shared by every Deutsch DTM housing: the values belong to the contacts, not the housing.

Strip length

Solid size 20 (0460-202-20141, 0462-201-20141, 0460-010-20141, 0462-005-20141): 3.96-5.54 mm (0.156-0.218 in). Stamped size 20 (1060/1062-20-01xx): 4.45 +/- 0.64 mm (0.175 +/- 0.025 in) per the DTT-20-00 guide.

114-151003 gives the stamped strip length only in a figure that could not be extracted; the legacy 2009 Deutsch manual gives 3.81-5.08 mm, consistent with the DTT-20-00 guide.Sourced182021
Crimp height
  • Stamped 1060/1062-20-01xx and 1062-20-03 (wire barrel): 16 AWG 1.22-1.30 mm
  • 18 AWG 1.19-1.27 mm
  • 20 AWG 0.94-1.02 mm
  • 22 AWG 0.89-0.97 mm
  • Crimp width 1.80-1.98 mm (insulation OD 1.91-3.18 mm). Solid contacts on HDT-48-00 (reference only, validate by pull test): 0460-202-20/0462-201-20 at 20 AWG 0.73-0.82 mm lock indent, 0.95-1.02 mm entry indent
  • 0460-010-20/0462-005-20 at 16 AWG 0.90-0.98 / 1.06-1.22 mm, at 18 AWG 0.79-0.90 / 1.03-1.10 mm.
Sourced1918
Pull-out force (minimum)
  • Stamped size 20: 14-18 AWG 89 N20 lbf
  • 20 AWG 67 N15 lbf
  • 22 AWG 22 N. Solid size 20: 89 N at 16, 18 and 20 AWG per 114-151004 rev E15 lbf · 20 lbf
  • 108-151004 rev E gives 156 N at 16 AWG, 111 N at 18 AWG and 67 N at 20 AWG. Contact retention in the housing: 89 N minimum.20 lbf
TE's two solid-contact documents disagree for size 20. Until TE confirms, take the higher figure per wire size as the pass mark (16 AWG 156 N, 18 AWG 111 N, 20 AWG 89 N).ConflictMedium221823
Application spec

Connector: 114-151010 rev D2. Contacts: 114-151004 rev E1 (solid 0460/0462-xxx-20), 114-151003 rev J1 (stamped 1060/1062-20-01). Tools: 0425-071-0000 rev D (HDT-48-00), 0425-072-0000 rev A (DTT-20-00).

Sourced1618192021

Assembly

  1. Check the insulation OD is within the DTM seal range of 1.35-3.05 mm (16-20 AWG).16
  2. Strip the wire to the length for the contact type and check for damaged strands.182021
  3. Solid contacts: set the HDT-48-00 dial to the wire size, insert the wire until strands show in the inspection hole with a 0.63-2.54 mm gap to the insulation, and close the handles until the ratchet releases.2018
  4. Stamped contacts: seat the contact fully in the locator of the cavity marked for the wire size, insert the wire and close the tool until the ratchet releases.2119
  5. Inspect the crimp: all strands captured, no broken strands, mating end undamaged.1819
  6. Hold the contact about 25 mm behind the crimp barrel, grommet towards you, and push straight in until it stops and locks. Tug the wire lightly to confirm. For 20 AWG and smaller wire, insertion tool M15570-20 may help.16
  7. Fit a sealing plug in every unused cavity; it should sit flush with the cavity opening, not pushed through.16
  8. Push the wedge lock in until it snaps into the locked position (pliers can help on receptacles; plugs by hand).16
  9. Mate until there is an audible and tactile click, then check the latch is fully engaged.16

Removal

  1. Unmate: press the plug latch to its stop and pull the halves apart.16
  2. Grip the wedge lock with small long-nose pliers (or the DT-RT1 hook) and pull it straight out. Avoid damaging its inner ribs if it will be reused.1624
  3. Push the DT-RT1 screwdriver tip or a small flat screwdriver into the contact's cavity to release the locking finger.1624
  4. Pull the wire until the contact comes out, holding the rear grommet in place if the housing has no end cap.16
  5. If the grommet came out, inspect it for cuts or cracks and replace it if damaged.16

Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →

Where it's used

Our harness designs

Not used in our current harness designs.

Sensors that mate with it

No sensor in our sensor library lists this connector yet.

Factory (OEM) use

No factory ECU in our pinout library uses this connector family.

Commonly used for

Assembly notes

Insert each crimped socket from the wire side until it clicks, then push the WM-4S wedge in from the mating face.

The wedge only seats when every contact is fully home, so a wedge that will not close points to a short contact.Medium2

Solid contacts are crimped with a four-indent closed-barrel tool such as HDT-48-00. Stamped contacts need an open-barrel F-crimp tool. Do not mix the two crimp styles in one tool.129

Stamped contacts list an insulation diameter of 1.9-3.2 mm, while the housing grommet seals 1.35-3.05 mm. Check that your wire's insulation sits inside both ranges or the seal can leak.91

Frequently asked

What mates with DTM06-4S?

DTM06-4S mates with the DTM04-4P receptacle, which carries the four size 20 pin contacts. The DTM06-4S drawing states the pairing and says it applies to all modifications of the DTM04-4P, so suffix variants such as end caps or flanges still mate with the plain DTM06-4S plug.2

Which wedge lock does DTM06-4S use?

DTM06-4S uses the WM-4S secondary wedge lock, which TE sells separately from the housing. The receptacle side uses a different wedge, WM-4P. Fit the wedge only after all four sockets have clicked into their cavities, because it is what holds the contacts against being pulled back out.23

Which socket contacts fit DTM06-4S?

DTM06-4S takes size 20 Deutsch sockets. TE lists solid 0462-201-20141 for 20 AWG and 0462-005-20141 for 16-18 AWG, both nickel, plus gold 0462-201-2031 for 20 AWG. Stamped options are 1062-20-0122 (nickel) and 1062-20-0144 (gold), each for 16-22 AWG. All are rated 7.5 A typical.467910

Should I use solid or stamped contacts in DTM06-4S?

Use either; both are size 20 sockets that fit the same cavity. Solid contacts take a closed-barrel indent crimp and suit small batches with a hand tool such as HDT-48-00. Stamped contacts come on reels, use an open-barrel F-crimp and cover 16-22 AWG with one part number, which suits production runs.1294

Gold or nickel contacts for DTM06-4S?

Pick gold for low-current sensor signals and nickel for general circuits; the current rating is the same 7.5 A. TE offers gold versions of both the solid socket (0462-201-2031) and the stamped socket (1062-20-0144). Mate gold with gold, so order the matching gold pins for the DTM04-4P side.Medium7108

Keep going

Related

Sources

28 sources
  1. DTM06-4S product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  2. Customer drawing DTM06-4S rev A (plug, 4 sockets, size 20) · TE Connectivity (Deutsch) · vendor-doc · retrieved 2026-10-27
  3. Customer drawing DTM04-4P rev A (receptacle, 4 pins, size 20) · TE Connectivity (Deutsch) · vendor-doc · retrieved 2026-10-27
  4. 0462-201-20141 contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  5. 0411-240-2005 extraction tool, size 20 · element14 / Farnell · vendor-doc · retrieved 2026-10-27
  6. 0462-005-20141 socket contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  7. 0462-201-2031 gold socket contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  8. 0460-202-2031 gold pin contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  9. 1062-20-0122 stamped socket contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  10. 1062-20-0144 stamped gold socket contact product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  11. 0413-204-2005 sealing plug, size 20 · TE Connectivity · vendor-doc · retrieved 2026-10-27
  12. HDT-48-00 hand crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  13. DTT-20-00 crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  14. DEUTSCH DTM connectors FAQ · TE Connectivity · vendor-doc · retrieved 2026-10-27
  15. DTM06-4S product page (documents tab) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  16. Application Specification 114-151010 DEUTSCH DTM Series Connector System, rev D2 (23 Sep 2025) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  17. internal GAINS internal: GAINS universal harness designs v1: Single Controller and IO Module harness build scripts, connector lists and wire lists (pre-release, not yet built)
  18. Application Specification 114-151004 DEUTSCH Size 4-20 Solid Pin and Socket Contacts, rev E1 (14 Sep 2022) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  19. Application Specification 114-151003 DEUTSCH Size 20 S&F Pin and Socket Contacts, rev J1 (04 Jun 2026) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  20. Instruction Sheet 0425-071-0000 DEUTSCH Field Maintenance Crimp Tool HDT-48-00, rev D (15 Jan 2018) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  21. Instruction Guide 0425-072-0000 for DTT-20-00, rev A · TE Connectivity · vendor-doc · retrieved 2026-10-27
  22. Product Specification 108-151000 DEUTSCH Stamped and Formed Contacts, rev J (25 Sep 2024) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  23. Product Specification 108-151004 DEUTSCH Solid Contacts (HD), rev E (20 Aug 2020) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  24. Instruction Sheet 408-151008 DEUTSCH Removal Tool DT-RT1 for Front-Release Connectors, rev B (22 Jan 2015) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  25. Application Specification 114-151000 DEUTSCH Size 16 S&F Pin and Socket Contacts, rev R (08 Aug 2025) · TE Connectivity · vendor-doc · retrieved 2026-10-27
  26. Instruction Guide 0425-037-0000 for DTT-16-00, rev D · TE Connectivity · vendor-doc · retrieved 2026-10-27
  27. Product Specification 108-151010 DEUTSCH DTM Series, rev F · TE Connectivity · vendor-doc · retrieved 2026-10-27
  28. 2391435-1 product page (SDE F pin/socket 16-18 hand tool) · TE Connectivity · vendor-doc · retrieved 2026-10-27

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.