Nissan · Optical (digital)

Nissan 23731-02U11 optical crank angle sensor (RB)

Nissan 23731-02U11

Nissan 23731-02U11 is the optical crank angle sensor (CAS) listed for the RB20, non-NEO RB25 and RB26. It mounts on the exhaust cam and gives both crank and cam signals from one slotted disc. Listings indicate Hitachi- and Mitsubishi-made variants; R34-era NEO engines moved to separate cam and crank sensors.Low12

Key specifications

Measures: Cam rotation via a slotted disc (crank and cam signals combined). Output: Optical (digital).

MountingOn the exhaust camshaftLow confidence1
SignalsCombined crank and cam from one unitLow confidence1
Output levels and pinoutUnverifiedNot in a public Nissan document we could archive.Researched, unverified
Part numberMakerNote
23731-02U11NissanLow1

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

How it's calibrated

ECU-neutral: enter these values in whichever ECU you use. Nominal values without the maker's tolerance band.

Trigger setup

  • Trigger type: Optical (digital).12
  • Trigger edge: not published by the maker. Confirm the edge your ECU uses with a scope or a timing light before running the engine.

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptTo be confirmedCRANK/CAM inputs are specified for VR or Hall; an optical sensor's output level and pull-up need confirming (open item).Medium3
Haltech (Elite / Nexus)UnverifiedNo public statement on optical crank-angle sensors found.No public source
Link (G4X)UnverifiedNo public statement on optical crank-angle sensors found.No public source
MoTeC (M1)UnverifiedNo public statement on optical crank-angle sensors found.No public source
ECUMaster (EMU Black)UnverifiedNo public statement on optical crank-angle sensors found.No public source
AEM (Infinity)UnverifiedNo public statement on optical crank-angle sensors found.No public source
MaxxECUUnverifiedNo public statement on optical crank-angle sensors found.No public source
Holley (Terminator X / EFI)UnverifiedNo public statement on optical crank-angle sensors found.No public source

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

Optical units output digital pulses and need a supply; because they read the cam, cam-belt stretch shows up as timing error.Low1

Failure modes and checks

Timing drifts on a high-rpm RB

Likely cause Cam-driven CAS sees belt stretch

Check Compare with a timing light at idle and high rpm.Low1

Intermittent cut

Likely cause Worn CAS bearing or contaminated disc

Check Inspect the CAS for play and dirt on the disc.Low1

Frequently asked

How does the Nissan RB crank angle sensor work?

A slotted disc on the exhaust cam passes between LEDs and photodiodes, giving crank-angle and cylinder-reference pulses from one unit.Low1

Does the RB25 NEO use the same CAS?

No. Listings show NEO engines moved to separate cam and crank sensors (23731-5L300 family).Low1

Related

Use it with GAINS

Nissan 23731-02U11 optical crank angle sensor (RB) on GAINS hardware

ECU2CRANK (VR or Hall, single-ended, adaptive threshold)

Pins
On the ECU2 pin map
Pull-up
To be confirmed
Shielding
Shielded, drain at the ECU end only

Shielded cable, shield to sensor ground at the ECU end only. Hall pull-up arrangement to be confirmed in the schematic.Medium3

ECU2CAM (VR or Hall, single-ended)

Pins
On the ECU2 pin map
Pull-up
To be confirmed
Shielding
Shielded, drain at the ECU end only

Shielded cable, shield to sensor ground at the ECU end only.Medium3

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.34

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

  1. sensors/Nissan RB family: RB CAS/MAF/knock numbers · ebay.de · vendor-doc · retrieved 2026-10-25
  2. sensors/Nissan knock 22060-30P00 and SR CAS: 22060-30P00 SR/KA/VG; SR CAS disk · walmart.com · vendor-doc · retrieved 2026-10-25
  3. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  4. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)

Not yet indexed: fewer than 3 FAQs.