Nissan RB · 1989-02

RB26 specs: horsepower, injectors, swaps and sensors

The RB26DETT is a twin-turbo 2.6 L inline-6 engine from Nissan (1989-02) with port fuel injection and coil-on-plug ignition. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low1320192161512

Power: 276 hp @ 6,800 rpm · Torque: 260 lb-ft (353 Nm) @ 4,400 rpm (Nissan rating, not a GAINS measurement)Medium132019

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1989-02Catalog range across the variants on this page.Researched, unverified
Displacement2.6L2,569 cc from bore × strokeSourced · medium132019
Layoutinline-6Researched, unverified
Bore × stroke86 × 73.7mm3.39 × 2.90 inSourced · medium132019
Compression ratio8.5:1Sourced · medium132019
Aspirationtwin-turboResearched, unverified
Fuel injectionport fuel injectionLow confidence161512
Blockcast ironSourced · medium32019
Cylinder linersnoneiron blockSourced · medium32019
Crankshaft
  • 8-counterweight crankWikipedia
  • Early short-nose oil pump drive commonly cited
Sourced · medium32019
Connecting rodsI-beamWikipediaSourced · medium32019
Pistons

cast with cooling channels under crown, piston oil squirters (Wikipedia)

Sourced · medium32019

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

RB26 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Nissan rating)276hp @ 6,800 rpmJDM JIS net 280 PS (206 kW) converted; 36 kgm (353 Nm); R32 Skyline GT-R (BNR32) per Nissan Heritage Collection; CR from third-party sourcesSourced · medium132019
Torque (Nissan rating)260 lb-ft @ 4,400 rpm353 NmSourced · medium132019
Other published ratings
  • R33 GT-R V-spec (BCNR33): 280 PS @6800, 368 Nm @440037.5 kgm
  • R34 GT-R (BNR34) incl. M-spec Nur: 280 PS @6800, 392 Nm @440040.0 kgm
  • Wikipedia: wastegates ~10 psi stock (not OEM-confirmed)
Sourced · medium132019

RB26 firing order

RB26 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleTop-feed, low-impedanceresistor boxLow confidence161512
MakerNippondenso/JECSnot confirmedLow confidence161512
Flow444cc/minforum (factory size list); pressure basis not statedLow confidence161512
Impedancelowpeak and holdLow confidence161512
ConnectorJetronic/EV1-styleFIC adapter PADPUtoJ6 for RB26Low confidence161512
LengthotherLow confidence161512
FeedtopLow confidence161512

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks 1200cc - Skyline RB20DET and RB26DETT (Bosch EV14) · 16MX-05-1200-6221200 cc/min maker listing (pressure basis not stated on product page)Needs adapter plug adapter to OEM harness; OEM low-Z resistor pack bypass
DeatschWerks 1500cc - Skyline RB20DET and RB26DETT (Bosch EV14) · 16M-05-1500-6211500 cc/min maker listing (pressure basis not stated on product page)Needs adapter plug adapter to OEM harness; OEM low-Z resistor pack bypass
Fuel Injector Clinic Nissan Skyline RB26 (High-Z) 1000cc · IS185-1000H231000 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec)Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoJ plug-and-play adapter (USCAR to Jetronic/EV1); OEM resistor box bypass
Injector Dynamics ID1050-XDS (GTR-R32, R33, R34 (14mm)) · 1050.60.14.D.64710121065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter USCAR plug adapter to OEM harness (sold separately); OEM low-Z resistor box must be bypassed/removed for high-Z injectors
Injector Dynamics ID1300-XDS (GTR-R32, R33, R34 (14mm)) · 1300.60.14.D.65811131335 cc/min 3.0 bar (43.5 psi), iso-octane, 52 C (maker spec)Needs adapter USCAR plug adapter to OEM harness (sold separately); OEM low-Z resistor box must be bypassed/removed for high-Z injectors
Injector Dynamics ID2600-XDS (GTR-R32, R33, R34 (14mm)) · 2600.60.14.D.66911142600 cc/min 3.0 bar (43.5 psi) (maker spec; min 11 V supply)Needs adapter USCAR plug adapter to OEM harness (sold separately); OEM low-Z resistor box must be bypassed/removed for high-Z injectors

RB26 swap

Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank position × 123731-02U11Cross-ref: D-Max aftermarket CAS (for non-Hitachi units)Low confidence18optical CAS on exhaust cam (combined crank/cam) · digital (optical)RB20/RB25/RB26 per listingsListings indicate Hitachi and Mitsubishi supplied variants
Cam positionNot yet sourcedResearched, unverifiedcombined with CAS
Knock × 2 (front/rear group)Not yet sourcedResearched, unverifiedpiezo knock sensorCount from family practice; part number not sourced
MAPNot yet sourcedResearched, unverifiedNot yet sourcedFactory fuelling is MAF-based; separate boost sensor not sourced
MAF × 2 (one per turbo intake)22680-05U00|Nismo Heritage B2680-RHR40Sourced · medium17hot-wire, analog 0-5 V · 0-5 V analogR32/R33/R34 GT-RNismo Heritage reproduction carries its own number
O2 (upstream)Not yet sourcedResearched, unverifiednarrowband zirconia · 0-1 VCount not sourced

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank trigger

optical CAS on exhaust cam (combined crank/cam), digital (optical)

RB20/RB25/RB26 per listingsLow confidence18
Cam sensorcombined with CASResearched, unverified
Valve timingnoneResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (hot-wire / hot-film). R32 engine manual: two air flow meters (AIR FLOW MTR + AIR FLOW MTR (R)), hot-wire, two exhaust gas sensors (EXT GAS SEN + (R)), 0-1V narrowband. R33/R34 GT-R not separately read; Nismo kit lists 2 airflow meters for RB26.2

Factory oxygen sensors

Upstream: narrowband (zirconia) (2 (1 per bank)). Downstream O2 sensors: no. Closed-loop fuelling: narrowband closed loop (RICH/LEAN feedback) at light load; open loop at high load (Nissan FSM).2

Injector drive

Factory injector impedance: low (peak and hold). Connector: Jetronic/EV1-style (FIC adapter PADPUtoJ6 for RB26).Low161512

Driver and calibration

Low-impedance and direct injectors need a peak-and-hold or direct-injection driver. Any injector change also needs new flow and dead-time data in the calibration. Researched, unverified

Common first upgrades (reported)

Builders most often report upgrading: upgraded/wider oil pump gears or drive collar, dry sump for track, N1 block for high power (MotoIQ).Medium32019

Valvetrain, factory engine management and weak points across every generation are on the Nissan RB guide.

Vehicles with the RB26DETT

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

23 sources
  1. Factory ratings: Nissan RB family (RB26/RB25/RB20) (E-734) · nissan-global.com · reference · retrieved 2026-10-25
  2. Nissan RB26DETT / RB20DET fueling (E-841) · servicemanuals-backend.fly.storage.tigris.dev · service-manual · retrieved 2026-10-25
  3. Nissan RB internals (E-1091) · en.wikipedia.org · reference · retrieved 2026-10-25
  4. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1203) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  9. Injectors / ID2600-XDS fitment (E-1233) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  10. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. Injector Dynamics ID2600-XDS fitment table (E-1292) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  15. Fuel Injector Clinic catalogue (E-1295) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  16. RB26 / RB20 factory sizes (E-1301) · forums.nicoclub.com · community · retrieved 2026-10-25
  17. Sensors/Nissan RB26 MAF (E-1416) · jdmgarageuk.com · reference · retrieved 2026-10-25
  18. Sensors/Nissan RB family (E-1417) · ebay.de · vendor-doc · retrieved 2026-10-25
  19. OEM turbo: nissan-rb26-t28 (E-10090) · en.wikipedia.org · reference · retrieved 2026-11-04
  20. Nissan RB30E / RB30ET (E-16501) · en.wikipedia.org · reference · retrieved 2026-11-04
  21. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  22. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  23. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.