Honda · Analog 0-5 V (ratiometric)

Honda 37830-PNC-003 MAP sensor (K-series, J35)

Honda 37830-PNC-003

Honda 37830-PNC-003 is the MAP sensor Honda lists for the 2006-11 Civic Si (K20Z3), the Accord and TSX K24 and the Pilot J35, all naturally aspirated applications. For a boosted K-series build, fit a 3- or 4-bar sensor and calibrate it.234

Key specifications

Measures: Intake manifold absolute pressure. Output: Analog 0-5 V (ratiometric).

Listed for2006-11 Civic Si, Accord, TSX, PilotSourced23
Range class1-barinferred: naturally aspirated applicationsResearched, unverified
Transfer functionUnverifiedNot in a public Honda document we could archive.Researched, unverified
Part numberMakerNote
37830-PNC-003Honda23

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Any AVI (AVI1-6; pins 17-20, 14 and 26 on the ECU2): 0-5 V input with the pull-up off. Concept hardware.Medium5
Haltech (Elite / Nexus)Configurable (generic input)Analog voltage input (AVI). Haltech's wiring diagram says inputs are user definable in software; enter the maker's transfer function.78
Link (G4X)Configurable (generic input)Analogue voltage input (9 on the G4X FuryX). Link's public page does not describe how a custom calibration is entered.Medium9
MoTeC (M1)Configurable (generic input)Analogue voltage input (17 on the M150). MoTeC's sensor pages show a manual-calibration option in M1 Tune.Medium1011
ECUMaster (EMU Black)Configurable (generic input)One of 9 analog 0-5 V inputs. ECUMaster lists user-defined sensor characteristics for some functions.Medium12
AEM (Infinity)Configurable (generic input)Analog 0-5 V input (12-bit). AEM's spec sheet does not say how a custom calibration is entered.Medium13
MaxxECUConfigurable (generic input)Extra 0-5 V input (6 on the RACE). The public page does not describe calibration entry.Medium14
Holley (Terminator X / EFI)Configurable (generic input)'5' analog input, set up as a custom sensor in Holley's software (per the wiring manual).15

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

Three-wire ratiometric sensor on the ECU sensor rail; confirm pin functions with a meter.Medium1

Failure modes and checks

MAP code after intake work

Likely cause Connector or vacuum port disturbed

Check Check the plug lock and the port seal.Medium1

No boost reading on a turbo build

Likely cause 1-bar sensor saturates at atmosphere

Check Fit a 3- or 4-bar sensor.Medium1

Frequently asked

Which K-series engines use 37830-PNC-003?

Honda lists it for the 2006-11 Civic Si and for Accord and TSX K24 applications; the RSX K20A2 used 37830-PGK-A01.23

Do I need this sensor with a standalone ECU?

Only if you keep the factory MAP. An ECU with its own MAP sensor can read manifold pressure through a hose instead.Medium1

Related

Use it with GAINS

Honda 37830-PNC-003 MAP sensor (K-series, J35) on GAINS hardware

ECU2Internal 4-bar MAP

Pins
On the ECU2 pin map
Pull-up
Not used
Shielding
Not needed

The ECU2 has its own 4-bar MAP on a hose barb, so an external MAP is optional (finer resolution or a second pressure such as boost before the throttle).Medium5

ECU2AVI (0-5 V, pull-up off)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Any free analog input with its pull-up off; 5 V from pin 28, ground to pin 29.Medium5

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.56

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

15 sources
  1. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  2. OEM sensor PNs (Honda): Honda MAP PNs: 37830-P05-A01 (1995 Civic), 37830-PNC-003 (06-11 Civic Si, Accord, Pilot), 37830-RNA-A01 (2012 · hondapartsnow.com · oem · retrieved 2026-10-25
  3. OEM sensor PNs (Acura RSX/TSX): RSX knock PRB-A01 (Type-S) / PPL-A01; AF 36531-PRB-A01, PND-A01/A11; MAP 37830-PGK-A01; TSX knock PPL-A01, LAF · acurapartswarehouse.com · oem · retrieved 2026-10-25
  4. OEM sensor PNs (Honda Pilot J35): 2005 Pilot knock 30530-P8F-A01, LAF 36531-RCA-A02/RDM-A01, secondary O2 RKB-004, MAP PNC-003 · hondapartsnow.com · oem · retrieved 2026-10-25
  5. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  6. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
  7. Nexus R3 wiring diagram (HT-193000_WD) · Haltech · vendor-doc · retrieved 2026-10-27
  8. Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-10-27
  9. M150 product page (M1 series) · MoTeC · vendor-doc · retrieved 2026-10-27
  10. TMAP Sensor product page · MoTeC · vendor-doc · retrieved 2026-10-27
  11. EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-10-27
  12. Infinity Series 5 hardware specification · AEM Electronics · vendor-doc · retrieved 2026-10-27
  13. MaxxECU RACE product page · MaxxECU · vendor-doc · retrieved 2026-10-27
  14. HP / Dominator EFI wiring manual 199R10555 · Holley · vendor-doc · retrieved 2026-10-27

Not yet indexed: fewer than 3 FAQs; more than 40% of specs unverified.