Honda · Analog 0-5 V (ratiometric)

Honda 37830-PAA-S00 MAP sensor (B-, H- and F-series)

Honda 37830-PAA-S00

Honda 37830-PAA-S00 (replacing 37830-P0G-S00) is the MAP sensor Honda lists for the Integra B18B and B18C, the Prelude H22 and the S2000 F20C, all naturally aspirated engines. Honda does not publish its transfer function publicly, so calibrate it before using it with a standalone ECU.345

Key specifications

Measures: Intake manifold absolute pressure. Output: Analog 0-5 V (ratiometric).

Replaces37830-P0G-S00Sourced3
Listed for1994-2001 Integra, 1999 Prelude, S2000Sourced345
Range class1-barinferred: naturally aspirated applicationsResearched, unverified
Transfer functionUnverifiedNot in a public Honda document we could archive.Researched, unverified
Part numberMakerNote
37830-PAA-S00HondaReplaces 37830-P0G-S00345

Pinout and connector

No pinout is shown: the maker or OEM does not publish one in a document we could cite. Identify pins with a meter before wiring.

Connector not published. Browse the connector library

Native support across ECUs

ECU platformStatusHow to set it upSource
GAINS ECU2ConceptConfigurable (generic input)Any AVI (AVI1-6; pins 17-20, 14 and 26 on the ECU2): 0-5 V input with the pull-up off. Concept hardware.Medium6
Haltech (Elite / Nexus)Configurable (generic input)Analog voltage input (AVI). Haltech's wiring diagram says inputs are user definable in software; enter the maker's transfer function.89
Link (G4X)Configurable (generic input)Analogue voltage input (9 on the G4X FuryX). Link's public page does not describe how a custom calibration is entered.Medium10
MoTeC (M1)Configurable (generic input)Analogue voltage input (17 on the M150). MoTeC's sensor pages show a manual-calibration option in M1 Tune.Medium1112
ECUMaster (EMU Black)Configurable (generic input)One of 9 analog 0-5 V inputs. ECUMaster lists user-defined sensor characteristics for some functions.Medium13
AEM (Infinity)Configurable (generic input)Analog 0-5 V input (12-bit). AEM's spec sheet does not say how a custom calibration is entered.Medium14
MaxxECUConfigurable (generic input)Extra 0-5 V input (6 on the RACE). The public page does not describe calibration entry.Medium15
Holley (Terminator X / EFI)Configurable (generic input)'5' analog input, set up as a custom sensor in Holley's software (per the wiring manual).16

Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.

Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.

CAD and drawings

The maker does not publish a data sheet, drawing or CAD model for this part that we could find.

We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.

Engines that use it

From the platform catalog's sensor table; check fitment against your engine code and model year.

Wiring and installation

Three wires to the ECU's 5 V reference, sensor ground and an analog input with no pull-up; confirm pin functions with a meter.Medium1

Failure modes and checks

Rich idle and stumble

Likely cause Split vacuum hose or cracked sensor body

Check Check the sensor and hose under vacuum.Medium1

Reading off after a swap to a standalone ECU

Likely cause No calibration entered for the Honda sensor

Check Measure two pressures and enter slope and offset.Medium1

Frequently asked

What Honda engines use MAP sensor 37830-PAA-S00?

Honda lists it for the 1994-2001 Integra (B18B, B18C), the 1999 Prelude (H22) and the S2000 (F20C).345

Can this Honda MAP sensor read boost?

No. It is fitted to naturally aspirated engines; a boosted build needs a 3- or 4-bar sensor.Medium1

Related

Use it with GAINS

Honda 37830-PAA-S00 MAP sensor (B-, H- and F-series) on GAINS hardware

ECU2Internal 4-bar MAP

Pins
On the ECU2 pin map
Pull-up
Not used
Shielding
Not needed

The ECU2 has its own 4-bar MAP on a hose barb, so an external MAP is optional (finer resolution or a second pressure such as boost before the throttle).Medium6

ECU2AVI (0-5 V, pull-up off)

Pins
On the ECU2 pin map
Pull-up
Off
Shielding
Not needed

Any free analog input with its pull-up off; 5 V from pin 28, ground to pin 29.Medium6

GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.67

Concept Pre-release hardware. Pin assignments come from the current design documents and may change.

Sources

16 sources
  1. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
  2. OEM sensor PNs (Honda): Honda MAP PNs: 37830-P05-A01 (1995 Civic), 37830-PNC-003 (06-11 Civic Si, Accord, Pilot), 37830-RNA-A01 (2012 · hondapartsnow.com · oem · retrieved 2026-10-25
  3. OEM sensor PNs (Acura Integra): Integra 1994-2001 knock 30530-PV1-A01 (GS-R/Type R only), MAP 37830-PAA-S00, O2 36531-P73-G01, rear 36532-P73- · acurapartswarehouse.com · oem · retrieved 2026-10-25
  4. OEM sensor PNs (Honda Prelude): 1999 Prelude knock 30530-P5M-013, O2 36531-P5M-014/P5P-014, rear 36532-P5M-A02, MAP 37830-PAA-S00 · hondapartsnow.com · oem · retrieved 2026-10-25
  5. OEM sensor PNs (Honda S2000): S2000 knock 30530-PCX-003; O2 36531-PCX-014 (2001) / PZX-A01 (2004); MAP 37830-PAA-S00 · hondapartsnow.com · oem · retrieved 2026-10-25
  6. internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
  7. internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
  8. Nexus R3 wiring diagram (HT-193000_WD) · Haltech · vendor-doc · retrieved 2026-10-27
  9. Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-10-27
  10. M150 product page (M1 series) · MoTeC · vendor-doc · retrieved 2026-10-27
  11. TMAP Sensor product page · MoTeC · vendor-doc · retrieved 2026-10-27
  12. EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-10-27
  13. Infinity Series 5 hardware specification · AEM Electronics · vendor-doc · retrieved 2026-10-27
  14. MaxxECU RACE product page · MaxxECU · vendor-doc · retrieved 2026-10-27
  15. HP / Dominator EFI wiring manual 199R10555 · Holley · vendor-doc · retrieved 2026-10-27

Not yet indexed: fewer than 3 FAQs; more than 40% of specs unverified.