Wiring guide

Deutsch pins and connector kits: contact sizes, part numbers and what a kit should contain

A Deutsch connector kit bundles the housings, wedgelocks and matching contacts for DT, DTM or DTP connectors. Deutsch pins come in three sizes: size 20 for DTM (7.5 A), size 16 for DT (13 A) and size 12 for DTP (25 A). Each size comes as a solid machined or a stamped and formed contact, in nickel or gold, and each part number covers a set wire range.219182151411

Key takeaways

  • Size 20 = DTM (7.5 A), size 16 = DT (13 A), size 12 = DTP (25 A), per TE.
  • Solid contacts take an indent crimp (HDT-48-00); stamped contacts take an F-crimp (DTT tools).
  • The standard size 16 solid pin covers 16-20 AWG; 14 AWG needs its own contact.
  • Gold-plated versions exist in the same sizes; nickel is the standard plating.
  • A complete kit has both housings, both wedgelocks and the contacts; sealing plugs and tools are often extra.

What Deutsch pins are

Deutsch pins are the crimp contacts that go into Deutsch DT, DTM and DTP housings.

Contact size by series19201821
SeriesContact sizeMating pin diameterCurrent (TE)
DTM201.0 mm (0.04 in)7.5 A
DT161.59 mm (0.063 in)13 A
DTP122.39 mm (0.094 in)25 A

TE sells them as the DEUTSCH Common Contact range: pins for the receptacle side and sockets for the plug side.510

The contact size is set by the housing series. TE lists DTM housings for size 20, DT for size 16 and DTP for size 12 contacts.191821

Solid vs stamped and formed

Solid contacts are machined with a closed wire barrel and crimped with an indent tool such as TE's HDT-48-00.

Solid crimp toolHDT-48-004-indent, sizes 12, 16, 20Sourced24
Stamped crimp tools
  • DTT-20-00 (size 20), DTT-16-00size 16
  • Both listed as superseded
Sourced2322

Stamped and formed contacts are rolled from strip, use an F-crimp and come on reels or loose.51424

TE rates both styles at the same current for a given size, 13 A typical at size 16. The stamped ones also take a slightly wider wire range: 18-14 AWG at size 16 against 16-20 AWG for the standard solid pin.514

Contact part numbers by wire size

Pick the contact by wire gauge, then check the insulation OD.

Deutsch contacts (TE product pages)711151751069131416812
Part numberRoleSizeStyleWire rangePlating
0460-202-20141Pin20Solid20 AWG (0.5 mm²)Nickel
0462-201-2031Socket20Solid20 AWG (0.5 mm²)Gold
1060-20-0122Pin20Stamped22-16 AWG (0.35-1.5 mm²)Nickel
1062-20-0122Socket20Stamped22-16 AWG (0.35-1.5 mm²)Nickel
0460-202-16141Pin16Solid16-20 AWG (0.5-1.5 mm²)Nickel
0462-201-16141Socket16Solid16-20 AWG (0.5-1.5 mm²)Nickel
0460-202-1631Pin16Solid16-20 AWG (0.5-1.5 mm²)Gold
0460-215-16141Pin16Solid14 AWG (2 mm²)Nickel
0462-209-16141Socket16Solid14 AWG (2 mm²)Nickel
1060-16-0122Pin16Stamped18-14 AWG (0.75-2 mm²)Nickel (tin crimp area)
1062-16-0122Socket16Stamped18-14 AWG (0.75-2 mm²)Nickel (tin crimp area)
0460-204-12141Pin12Solid14-12 AWG (2.08-3.31 mm²)Nickel
0462-203-12141Socket12Solid14-12 AWG (2-3 mm²)Nickel

Several TE pages show the part as active but 'not currently available'; check distributor stock.

TE lists the stamped contacts with an insulation range (1.9-3.6 mm for size 16), while the solid contact pages leave that to the housing grommet.145

Nickel vs gold plating

Nickel is the standard plating across the range.

Gold versions use the same part number pattern with a different suffix, for example 0460-202-1631 for a gold size 16 pin and 0462-201-2031 for a gold size 20 socket.5611

TE rates the gold size 20 socket from -55 to 150 °C with the same 7.5 A typical current as the nickel version. Plating does not change the wire range or the crimp tool.117

What a Deutsch connector kit contains

Kits are sold two ways.

Checklist for one sealed 2-way DT pairMedium25185102
ItemExample partQty
Receptacle (pins)DT04-2P1
Plug (sockets)DT06-2S1
Receptacle wedgelockW2P1
Plug wedgelockW2S1
Size 16 pins0460-202-16141 (16-20 AWG)2
Size 16 sockets0462-201-16141 (16-20 AWG)2

DT04-2P and W2P are covered on their own part pages. Sealing plugs are only needed when a cavity is left empty.

A plug kit holds the plug housing, its wedgelock and the socket contacts; a full kit adds the receptacle, its wedgelock and the pins so you can build a mating pair.Medium2

Check the contact style and range on the kit label. ProWire's DT kits, for instance, come in 20-16 AWG and 16-14 AWG versions, in nickel or gold.Medium2

Wedges, sealing plugs and removal tools

The wedgelock is the secondary lock that holds the contacts in place; TE's W2S is the orange wedge for the DT 2-way plug.

Size 20 sealing plug0413-204-2005, red, PBT GF30, -55 to 125 °CSourced4
Size 16 sealing plug for DT114017 is the part number commonly sold for DT cavitiesTE's 114017 product page returned an error when we checked; confirm the part number with TE or a distributor.Researched, unverified
Size 16 removal tool0411-204-160516-18 AWG, dark blueSourced3
Size 20 removal tool0411-240-2005Sourced1
Size 12 removal toolSold by TE for DTP contactsWe did not confirm a size 12 removal tool part number on a TE or distributor page.Researched, unverified

Fill any empty cavity with a sealing plug sized to the contact, or the housing will not seal.Medium254

Removal tools are sized by contact. TE's 0411-204-1605 is the size 16 extraction tool for 16-18 AWG, and 0411-240-2005 is the size 20 tool.31

Frequently asked

What comes in a Deutsch connector kit?

A full Deutsch connector kit holds both housings (receptacle and plug), both wedgelocks and the matching pins and sockets for one mating pair. Plug-only kits hold the plug, its wedge and the sockets. Crimp tools, removal tools and sealing plugs are often sold separately, so check the contents list and the contact wire range.Medium2

What size are Deutsch pins?

Deutsch pins come in three sizes. Size 20 contacts (1.0 mm pin) go in DTM housings and carry 7.5 A; size 16 (1.59 mm) go in DT and carry 13 A; size 12 (2.39 mm) go in DTP and carry 25 A, per TE's product pages. Each size has its own crimp and removal tools.191821

What is the difference between solid and stamped Deutsch pins?

Solid pins are machined with a closed barrel and need an indent crimp tool such as HDT-48-00. Stamped and formed pins are rolled from strip with open wings and need an F-crimp tool such as DTT-16-00. TE rates both at 13 A typical in size 16, and the stamped ones cover 18-14 AWG.5142422

Do I need gold Deutsch pins?

Not for current capacity. TE rates its gold and nickel contacts of the same size at the same typical current: 13 A for the size 16 pins 0460-202-1631 (gold) and 0460-202-16141 (nickel). Gold versions share the wire range and crimp tool, so the choice comes down to the signal and the spec you build to.Medium65

What Deutsch pin fits 14 AWG wire?

In a DT housing, use the size 16 solid pin 0460-215-16141 or socket 0462-209-16141, both made for 14 AWG (2 mm²), or the stamped 1060-16-0122 pin, which covers 18-14 AWG. The standard 0460-202-16141 solid pin stops at 16 AWG. For 12 AWG, use DTP size 12 contacts.9131458

Keep going

Related

Sources

25 sources
  1. 0411-240-2005 extraction tool, size 20 · element14 / Farnell · vendor-doc · retrieved 2026-10-27
  2. Deutsch DT connector kits category page · ProWire USA · vendor-doc · retrieved 2026-10-27
  3. 0411-204-1605 extraction tool, size 16, product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  4. 0413-204-2005 sealing plug, size 20: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  5. 0460-202-16141 pin, solid, size 16, nickel: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  6. 0460-202-1631 pin, solid, size 16, gold: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  7. 0460-202-20141 pin, solid, size 20, nickel: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  8. 0460-204-12141 pin, solid, size 12: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  9. 0460-215-16141 pin, solid, size 16, 14 AWG: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  10. 0462-201-16141 socket, solid, size 16, nickel: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  11. 0462-201-2031 socket, solid, size 20, gold: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  12. 0462-203-12141 socket, solid, size 12: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  13. 0462-209-16141 socket, solid, size 16, 14 AWG: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  14. 1060-16-0122 pin, stamped and formed, size 16: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  15. 1060-20-0122 pin, stamped and formed, size 20: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  16. 1062-16-0122 socket, stamped and formed, size 16: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  17. 1062-20-0122 socket, stamped and formed, size 20: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  18. DT06-2S product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  19. DEUTSCH DTM connectors FAQ · TE Connectivity · vendor-doc · retrieved 2026-10-27
  20. DTM06-4S product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  21. DTP06-4S product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  22. DTT-16-00 hand crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  23. DTT-20-00 hand crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  24. HDT-48-00 hand crimp tool product page · TE Connectivity · vendor-doc · retrieved 2026-10-27
  25. W2S wedgelock, DT 2-way plug: product page · TE Connectivity · vendor-doc · retrieved 2026-10-27

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.