Ford Godzilla 7.3 · 2020-

7.3 Godzilla specs: horsepower, firing order, injectors and sensors

The 7.3 Godzilla is a naturally aspirated 7.3 L V8 engine from Ford (2020-) with port fuel injection and coil-on-plug ignition. Its firing order is 1-5-4-8-6-3-7-2. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Medium1624

Power: 430 hp @ 5,500 rpm · Torque: 485 lb-ft (658 Nm) @ 4,000 rpm (Ford rating, not a GAINS measurement)1

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2020-Catalog range across the variants on this page.Researched, unverified
Displacement7.3L7,293 cc from bore × strokeSourced1
LayoutV8Researched, unverified
Bore × stroke107.2 × 101mm4.22 × 3.98 inSourced1
Compression ratio10.5:1Sourced1
Aspirationnaturally aspiratedResearched, unverified
Fuel injectionport fuel injectionSourced · medium4
Blockcast ironSourced · medium3
Cylinder linersnoneiron blockSourced · medium3
Crankshaftforged steelSourced · medium3
Pistonscast aluminiumcrate listingSourced · medium3

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

7.3 Godzilla horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Ford rating)430hp @ 5,500 rpmSAE net, 2023+ Super Duty / Ford Performance M-6007-73B crate engine page (seen directly)Sourced1
Torque (Ford rating)485 lb-ft @ 4,000 rpm658 NmSourced1
Other published ratings
  • 2020-22 Super Duty: 430 hp @5500, 475 lb-ft @4000
  • 2020 chassis cab: 350 hp, 468 lb-ft
  • 2027 Super Duty (emissions de-rate): 420 hp @5350, 445 lb-ft @4250
  • Megazilla crate: 612 hp @5580, 670 lb-ft @3920 on premium
Sourced1

7.3 Godzilla firing order

The order the cylinders fire in, with the cylinder numbering the source states.

  1. 1
  2. 5
  3. 4
  4. 8
  5. 6
  6. 3
  7. 7
  8. 2
  9. Medium6Sourced · medium
The source states the sequence only; cylinder numbering is not shown.

No cylinder numbering found in an allowed source; the press source states the order only.

7.3 Godzilla injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

Styleport injectorstyle not statedSourced · medium4
Flow368cc/minconverted from 35 lb/hr (basis not stated)Sourced · medium4
ConnectorEV6 / USCARSourced · medium4
FeedtopSourced · medium4

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank positionFord LC3Z-6C315-C (repl DY-1518, LC3Z-6C315-A) | LC3Z-6C315-B | AL3Z-6C315-ASourced · medium5Not yet sourced2020-25
KnockFord AL3Z-12A699-ASourced · medium5Not yet sourcedSuper Duty 7.3 gas 2020-25
MAFFord LC3Z-12B579-B -> -C (repl AFLS-198) | JX6Z-12B579-A (2020-22) | PC3Z-12B579-A -> -B (2023-25)Sourced · medium5Not yet sourced
O2 (upstream)Ford K2GZ-9F472-A (front)Sourced · medium5Not yet sourced2020-22
O2 (downstream)Ford LC3Z-9G444-B (repl DY-1575) | GK4Z-9G444-G (2020-22) | ML3Z-9G444-E (2023-25)Sourced · medium5Not yet sourced

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank trigger

OEM sensor Ford LC3Z-6C315-C (repl DY-1518, LC3Z-6C315-A) | LC3Z-6C315-B | AL3Z-6C315-A

2020-25Sourced · medium5
Valve timingcam phaserpushrodResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (hot-wire / hot-film). Ford Performance 7.3 control pack: induction tube with integrated MAF; one UEGO per bank upstream with wide-range closed-loop feedback.2

Factory oxygen sensors

Upstream: wideband A/F (UEGO) (2 (1 per bank)). Downstream O2 sensors: yes. Closed-loop fuelling: wideband (UEGO) closed-loop A/F control.2

Injector drive

Connector: EV6 / USCAR.Medium4

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

That suggests the pistons and rods are the first limit (inference).Medium3

Common first upgrades (reported)

Builders most often report upgrading: forged pistons (e.g. Wiseco), rods; stock block/crank retained (Engine Builder builds).Medium3

Valvetrain, factory engine management and weak points across every generation are on the Ford Godzilla 7.3 guide.

Vehicles with the 7.3 Godzilla

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Factory ratings: Ford 7.3 Godzilla (E-708) · performanceparts.ford.com · oem · retrieved 2026-10-25
  2. Ford 7.3 sensors (E-810) · performanceparts.ford.com · oem · retrieved 2026-10-25
  3. Godzilla 7.3 (E-1021) · enginebuildermag.com · press · retrieved 2026-10-25
  4. OEM injector (E-1214) · onallcylinders.com · press · retrieved 2026-10-25
  5. OEM sensors Ford Super Duty 7.3 (E-1329) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
  6. Firing order: Ford 7.3 Godzilla (press) (E-4818) · enginelabs.com · press · retrieved 2026-10-28

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.