GM small-block Gen I / Gen II · 1992-97

LT1 Gen II specs: horsepower, firing order, injectors and sensors

The LT1 Gen II (Opti-Spark) is a naturally aspirated 5.7 L V8 engine from GM (1992-97) with port fuel injection and distributor ignition. Its firing order is 1-8-4-3-6-5-7-2. Factory load sensing changes with year and market. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low1161723857 Conflict

Power: 300 hp @ 5,000 rpm · Torque: 330 lb-ft (447 Nm) @ 4,000 rpm (GM rating, not a GAINS measurement)Medium1

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1992-97Catalog range across the variants on this page.Researched, unverified
Displacement5.7L5,733 cc from bore × strokeConflict1
LayoutV8Researched, unverified
Bore × stroke101.6 × 88.4mm4.00 × 3.48 inConflict1
Compression ratio10.5:1Conflict1
Redline5,700rpmConflict1
Aspirationnaturally aspiratedResearched, unverified
Recommended fuelpremium unleadedConflict1
Fuel injectionport fuel injectionLow confidence857
Main caps
  • 4-bolt (straight) on C4 Corvette
  • 2-bolt on 1993-97 F-body, some 1997 Camaros reportedly 4-bolt (forum)
Low confidence4
Crankshaft
  • Cast
  • Shares casting 14088526 with late 350 but balanced for lighter LT1 pistons (Corvette Action Center rebuild article)
Low confidence4
Connecting rods

forged steel (early) -> powdered metal from ~1994 Corvette, all LT1 by 1995 (Corvette Action Center)

Low confidence4
Pistonsflat-topmaterial not sourcedLow confidence4

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

LT1 Gen II horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (GM rating)300hp @ 5,000 rpm1992-95 C4 Corvette rating, SAE net. Redline 5700 with fuel cutoff 5850 per Corvette Anthology (C4). Fuel per Wikipedia Gen II infobox.Conflict1
Torque (GM rating)330 lb-ft @ 4,000 rpm447 NmConflict1
Other published ratings
  • 1996 Corvette LT1: 300 hp / 340 lb-ft
  • F-body 1993-95: 275 hp / 325 lb-ft
  • F-body 1996-97: 285 hp / 335 lb-ft
  • 1996-97 SS/WS6: 305 hp
  • B/D-body (Impala SS, Caprice, Roadmaster, Fleetwood) 1994-96: 260 hp / 330 lb-ft (250 hp w/ mechanical fan)
  • CR quoted 10.4-10.5
Conflict1

LT1 Gen II firing order

The order the cylinders fire in, with the cylinder numbering the source states.

  1. 1
  2. 8
  3. 4
  4. 3
  5. 6
  6. 5
  7. 7
  8. 2
  9. Medium1617Sourced · medium
FRONTLeft (driver) bank11345677Right (passenger) bank28436582
Top view, front of the engine at the top. Small badges show each cylinder's place in the firing sequence. Numbered front to back: odd cylinders on the left (driver-side) bank, even on the right. Distributor turns clockwise.

LT1 Gen II injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleEV1 (Jetronic)-connector tall injector (GM Multec per forum)Low confidence857
OEM part numbers17121068/ 17095004forum/listing, unverifiedLow confidence857
MakerGM/Rochester MultecforumLow confidence857
Flow252cc/minconverted from 24 lb/hr @ 43.5 psi (forum-reported)Low confidence857
ImpedancehighsaturatedLow confidence857
ConnectorEV1 / JetronicLow confidence857
LengthstandardID kit code 60 mmLow confidence857
FeedtopLow confidence857
O-ring OD (top / bottom)14/ 14 mmLow confidence857

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
Fuel Injector Clinic (FIC) FIC 365cc High-Z injector set · IS300-0365HMedium18365 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Needs adapter harness plug change; FIC set includes USCAR pigtails (PGTUSC8) or optional plug-and-play adapters PADPUtoJ8
Fuel Injector Clinic (FIC) FIC 650cc High-Z injector set · IS300-0650HMedium18650 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Needs adapter harness plug change; FIC set includes USCAR pigtails (PGTUSC8) or optional plug-and-play adapters PADPUtoJ8
Fuel Injector Clinic (FIC) FIC 1200cc High-Z injector set · IS300-1200HMedium181200 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Plug-in
Injector Dynamics ID1050-XDS (set) · 1050.60.14.14.85911131065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec)Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them
Injector Dynamics ID1750-XDS (set) · 1750.60.14.14.8610121728 cc/min cc/min @ 3.0 bar (43.5 psi), E10 cert fuel at 49 C (maker spec)Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank positionGM 19170837 (repl 10456534, 10456237)Sourced · medium1415Not yet sourced1996-97 Camaro 5.7, 1996 CorvetteAdded for OBD-II 1996; 1992-95 Corvette lists 10457661 crankshaft position sensor assy
Cam positionOpti-Spark distributor (optical)Low confidence14optical (in distributor)1992-97No separate cam sensor in Camaro catalogue for LT1; Corvette 1990-91 10137658 is L98-era
KnockGM 10456126 (1992-95) | GM 10456287 (1996-97; repl 10456017)Sourced · medium1415Not yet sourced10456126: 1991-95 Camaro 5.0/5.7, 1992-95 Corvette 5.7; 10456287: 1996-97 Camaro 5.7, 1996 Corvette10456287 is listed in some catalogue entries as ESC sensor/control module, verify
MAPGM 12569240Sourced · medium14Not yet sourced1988-97 Camaro 5.7 (LT1 1993-97)
MAFGM 25099215 (1994 Corvette, with IAT)Low confidence15Not yet sourced1994 Corvette 5.7Camaro/Firebird LT1 MAF number not found in this pass
O2 (upstream)GM 19178930 (repl 25312184, 25165313, 25171579)Cross-ref: Denso 234-4012 (MM lists 94-97 Camaro Firebird upstream flat 4-pin)Sourced · medium1415Not yet sourced1994-97 Camaro 3.8/5.7; 1997-2003 Corvette

Ignition and triggers

Ignition systemdistributorResearched, unverified
Crank triggerOEM sensor GM 19170837repl 10456534, 104562371996-97 Camaro 5.7, 1996 CorvetteSourced · medium1415
Cam sensoropticalin distributor1992-97Low confidence14
Valve timingnonepushrodResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by a strategy that changes with year and market. MAP speed-density 1992-93 (Corvette 92-93, F-body 93); MAF from 1994 with speed-density fallback on MAF fault. Forum/knowledge-base sources only; OBD-II year boundary conflicts (95 had OBD-II connector).Low23

Factory oxygen sensors

Downstream O2 sensors: no (1992-95) / yes (1996-97 OBD-II).Low23

Injector drive

Factory injector impedance: high (saturated). Connector: EV1 / Jetronic.Low857

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

Forum reports name the connecting rods and rod bolts as the usual first limit.Low4

Common first upgrades (reported)

Builders most often report upgrading: splayed 4-bolt main caps on 2-bolt blocks (requires line bore); rods (forum).Low4

Valvetrain, factory engine management and weak points across every generation are on the GM small-block Gen I / Gen II guide.

Vehicles with the LT1 Gen II (Opti-Spark)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

18 sources
  1. Factory ratings: GM small-block Gen I/II (L98, L31, LT1) (E-700) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. GM TPI load strategy (E-800) · forums.corvetteactioncenter.com · community · retrieved 2026-10-25
  3. GM LT1 Gen II load strategy (E-801) · camaroz28.com · community · retrieved 2026-10-25
  4. LT1 Gen II internals (E-1012) · corvetteactioncenter.com · reference · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1202) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injector aftermarket fitment (E-1204) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  8. OEM injector (E-1225) · camaroz28.com · community · retrieved 2026-10-25
  9. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  10. Injectors / ID1750-XDS fitment (E-1232) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. OEM sensors GM Camaro (E-1320) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  15. OEM sensors GM Corvette (E-1321) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  16. Firing order: Chevrolet small block Gen I/II (E-4802) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
  17. Firing order: Chevrolet small block (crate engine instructions) (E-4803) · static.speedwaymotors.com · reference · retrieved 2026-10-28
  18. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.