Holden V8 (253 / 308 / 304) · 1969-88

Holden V8 253 / 308 / 304 specs: horsepower and sensors

The Holden V8 253 / 308 / 304 (carburettor) is a naturally aspirated 5.0 L V8 engine from GM/Holden (1969-88) with a carburettor from the factory and distributor ignition. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Medium12

Power: 240 hp @ 4,000 rpm · Torque: 315 lb-ft (427 Nm) @ 3,000 rpm (GM/Holden rating, not a GAINS measurement)Medium12

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1969-88Catalog range across the variants on this page.Researched, unverified
Displacement5.0L5,060 cc from bore × strokeSourced · medium12
LayoutV8Researched, unverified
Bore × stroke102.4 × 76.8mm4.03 × 3.02 inSourced · medium12
Compression ratio9.0:1Sourced · medium12
Aspirationnaturally aspiratedResearched, unverified
Fuel injectiona carburettor from the factorySourced · medium1
Blockcast ironSourced · medium1

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

Holden V8 253 / 308 / 304 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (GM/Holden rating)240hp @ 4,000 rpm308 (5.0) HT-HG 1969-71, 179 kW gross as listed by Wikipedia; bore x stroke are the 308'sSourced · medium12
Torque (GM/Holden rating)315 lb-ft @ 3,000 rpm427 NmSourced · medium12
Other published ratings
  • 308 HJ 9.7:1
  • VH Commodore 308: 126 kW @4200, 361 Nm @2800
  • 253 HT-HQ: 138 kW @4400, 355 Nm @2400
  • VL 5.0 carb 122 kW / 323 Nm
Sourced · medium12

Holden V8 253 / 308 / 304 firing order

Ignition and triggers

Ignition systemdistributorResearched, unverified
Valve timingnonepushrodResearched, unverified

Tuning notes

Factory load sensing

Carburettor from the factory: no factory ECU, injectors or O2 sensor; an EFI conversion supplies every sensor.Medium1

Factory oxygen sensors

Upstream: none (carburettor) (0). Downstream O2 sensors: no.Medium1

Valvetrain, factory engine management and weak points across every generation are on the Holden V8 (253 / 308 / 304) guide.

Vehicles with the Holden V8 253 / 308 / 304 (carburettor)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Holden V8 engine (253 / 308 / 304) (E-16500) · en.wikipedia.org · reference · retrieved 2026-11-04
  2. Holden VL Commodore engines and production (E-16511) · en.wikipedia.org · reference · retrieved 2026-11-04

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.

Not yet indexed: fewer than 60% of facts sourced; fewer than 3 sensors; fewer than 5 sources.