Nissan SR20 · 1990-02

SR20DE specs: horsepower, injectors and sensors

The SR20DE / SR20VE is a naturally aspirated 2.0 L inline-4 engine from Nissan (1990-02) with port fuel injection and coil-on-plug ignition. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low29176

Power: 140 hp @ 6,400 rpm · Torque: 132 lb-ft (179 Nm) @ 4,800 rpm (Nissan rating, not a GAINS measurement)Low29

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1990-02Catalog range across the variants on this page.Researched, unverified
Displacement2.0L1,998 cc from bore × strokeLow confidence29
Layoutinline-4Researched, unverified
Bore × stroke86 × 86mm3.39 × 3.39 inLow confidence29
Compression ratio10.0:1Low confidence29
Redline7,500rpmLow confidence29
Aspirationnaturally aspiratedResearched, unverified
Fuel injectionport fuel injectionLow confidence76
BlockaluminiumSourced · medium29
Cylinder linerssteel sleevesWikipedia citing MotorTrendSourced · medium29
Crankshaft
  • 8-counterweight crank on SR20DE
  • Lighter 4-counterweight crank (SR18DE type) used in SR20VE (Wikipedia)
Sourced · medium29
Connecting rods136.3mm lengthSAE spec via WikipediaSourced · medium29
Pistonsno oil squirters on DE, full-skirt pistons (forum)Sourced · medium29

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

SR20DE horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Nissan rating)140hp @ 6,400 rpmSAE net, US 1991-94 Sentra SE-R / NX2000 (B13); redline from enthusiast spec list (not OEM)Low confidence29
Torque (Nissan rating)132 lb-ft @ 4,800 rpm179 NmLow confidence29
Other published ratings
  • Wikipedia lists SR20DE at 145 hp @6400 / 132 lb-ft @4800 SAE (CONFLICT with 140 hp period rating)
  • JDM P10/P11 Primera: 150 PS @6400, 19.0 kgm @4800, CR 10.0186 Nm
  • SR20VE (P11 Primera 2.0Te-V / Bluebird): 190 PS @7000, 20.0 kgm @6000, CR 10.3196 Nm
  • SR20VE 2001-03 (P12): 204 PS @7200, 21.0 kgm @5200, CR 11.0206 Nm
Low confidence29

SR20DE firing order

SR20DE injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleNissan/JECS side-feedSR20DE per DW G20/SR20 listingLow confidence76
MakerJECSLow confidence76
ImpedancehighsaturatedLow confidence76
ConnectorJECS Nissan side-feedLow confidence76
LengthotherLow confidence76
FeedsideLow confidence76

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks G20/SR20/240sx SR20DET/KA24DE 370cc (side feed, 91-98) · 01J-00-0370-411370 cc/min maker listing (pressure basis not stated on product page)Plug-in
DeatschWerks G20/SR20/240sx SR20DET/KA24DE 550cc (side feed, 91-98) · 01J-00-0550-410550 cc/min maker listing (pressure basis not stated on product page)Plug-in
Injector Dynamics ID1050-XDS (Infiniti G20 91-96 / 99-02 14mm) · 1050.60.14.14.4Medium34561065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter aftermarket top-feed fuel rail (OEM rail is side-feed) + USCAR plug adapter

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank position × 1Not yet sourcedLow confidence8optical CAS on cam (combined crank/cam) · FWD disk may be 54 mm vs 50 mm RWD · digital (optical)Seller note: some FWD applications use 54 mm disk
Knock × 1Not yet sourcedResearched, unverifiedpiezo knock sensorPart number not sourced
MAPNot yet sourcedResearched, unverifiedNot yet sourcedNo MAP found (MAF-based)
MAF × 1Not yet sourcedResearched, unverifiedhot-wire, analog 0-5 V · 0-5 V analog
O2 (upstream) × 1Not yet sourcedResearched, unverifiednarrowband zirconia · 0-1 V

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank trigger

optical CAS on cam (combined crank/cam), FWD disk may be 54 mm vs 50 mm RWD, digital (optical)

Low confidence8
Valve timingVTC / VVLVEResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (hot-wire / hot-film). US 1999 Sentra SE-R SR20DE FSM: MAF (hot film), front + rear heated O2 (OBD-II). SR20VE (JDM) not covered by a source read.1

Factory oxygen sensors

Upstream: narrowband (zirconia) (1). Downstream O2 sensors: varies. Closed-loop fuelling: narrowband closed loop at stoich; open loop decel/accel, high load/high speed, cold or failed sensor (Nissan FSM).1

Injector drive

Factory injector impedance: high (saturated). Connector: JECS Nissan side-feed.Low76

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

MotoIQ: rockers fly off with over-rev, water pump flow collapses ~6,600 rpm, inadequate rod-bearing oil flow causing spun bearings, small oil capacity.Medium29

Common first upgrades (reported)

Builders most often report upgrading: mechanical-lash valvetrain conversion, GTI-R wide bearings, VE/GTI-R oil pump, larger oil pan, cooling mods (MotoIQ).Medium29

Valvetrain, factory engine management and weak points across every generation are on the Nissan SR20 guide.

Vehicles with the SR20DE / SR20VE

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

11 sources
  1. Nissan SR/KA ECCS fueling (E-840) · servicemanuals-backend.fly.storage.tigris.dev · service-manual · retrieved 2026-10-25
  2. Nissan SR20 internals (E-1090) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  4. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. DeatschWerks injector catalogue (E-1294) · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  8. Sensors/Nissan knock 22060-30P00 and SR CAS (E-1418) · walmart.com · reference · retrieved 2026-10-25
  9. OEM turbo: nissan-sr20det-t28 (E-10096) · en.wikipedia.org · reference · retrieved 2026-11-04
  10. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  11. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.