Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
4AGE horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
- 16v Gen1 blue top (AE86 1983-87): JDM 130 PS gross @6600, 149 Nm gross @5200, CR 9.4
- US ~112 hp @6600, 135 Nm @4800114 PS
- 16v Gen3 smallport red top (1989-91): 140 PS @7200, 147 Nm @6000, CR 10.3 (toyota.jp 1989 Trueno GT APEX)
- 20v silver top (1991-95): 160 PS @7400, 162 Nm @5200, CR 10.5
- 4A-GZE (SC12 supercharged) Gen1 1985-89: 145 PS @6400, 190 Nm @4400, CR 8.0, ~7-8 psi
- Gen2/3 1989-95: 165/170 PS @6400, 208 Nm @4400, CR 8.9, ~9-10 psi (Wikipedia; boost not OEM-confirmed)
- Wikipedia Gen3 caption says 140 PS @6600 vs table 7200
4AGE firing order
4AGE injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Injector Dynamics ID1050-XDS · 1050.60.11.D.446810 | 1065 cc/min at 3.0 bar, gasoline 52 C (maker) | Needs adapter USCAR-to-Toyota plug adapters (ID connector is USCAR; adapters sold separately per retailer listings E-1238) |
| Injector Dynamics ID1300-XDS · 1300.60.11.D.457911 | 1335 cc/min at 3.0 bar, iso-octane 52 C (maker) | Needs adapter USCAR-to-Toyota plug adapters (ID connector is USCAR; adapters sold separately per retailer listings E-1238) |
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Knock | Toyota 89615-17010Sourced12 | knock control sensor (Denso) | US MR2 AW11 1987-89 GT (4A-GELC) and Supercharger (4A-GZE)20v 4A-GE (JDM) not checked. |
| MAP | Not yet sourcedLow confidence12 | not listed for 1987 AW11 (AFM-metered) | US 1987 MR2 |
| MAF | Toyota 22250-16020 | Toyota 22250-16040 | Toyota 22250-16090Sourced · medium12 | intake air flow meter (22250 series) | US 1987 MR2 4A-GELC/4A-GZEVane vs other type not stated in catalogue. |
| O2 (upstream) | Toyota 89465-19205 (-> -19206) | Toyota 89465-19135 (-> -19136) | Toyota 89465-19245Sourced · medium12 | oxygen sensor (position not stated) | US 1987 MR2Position not stated. |
Ignition and triggers
Tuning notes
Factory load sensing
The factory ECU measures load by a strategy that changes with year and market. Wikipedia: 16v gen1 vane AFM (US/EU) vs MAP (JDM 4A-GEU); gen2/3 MAP outside US, MAF in US; 20v Silver Top vane AFM, 20v Black Top MAP; 4A-GZE gen1 AFM, gen2/3 MAP (D-Jetronic). Mostly uncited statements.Low23
Factory oxygen sensors
Upstream: narrowband (zirconia) (era-typical; not sourced) (1). Downstream O2 sensors: varies.Low23
Injector drive
Factory injector impedance: low (peak and hold) for 4A-GZE. Connector: Toyota.Low6
Driver and calibration
Low-impedance and direct injectors need a peak-and-hold or direct-injection driver. Any injector change also needs new flow and dead-time data in the calibration. Researched, unverified
Valvetrain, factory engine management and weak points across every generation are on the Toyota 4A-GE guide.
Vehicles with the 4A-GE (16v / 20v) / 4A-GZE
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
12 sources
- Factory ratings: Toyota A family (4A-GE/4A-GZE) (E-726) · toyota.jp · oem · retrieved 2026-10-25
- Toyota 4A-GE / 4A-GZE air metering (E-832) · en.wikipedia.org · reference · retrieved 2026-10-25
- Toyota 4A-GE / 4A-GZE / 3S-GTE internals (E-1042) · en.wikipedia.org · reference · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- OEM sensor PNs (Toyota 4A-GE AW11) (E-1369) · toyotapartsdeal.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.



