TE Connectivity (DEUTSCH), Amphenol, Glenair, Souriau and others

Mil-spec and Autosport circular connectors (MIL-DTL-38999 and DEUTSCH AS)

MIL-DTL-38999D3899938999 Series IIIDEUTSCH AutosportDEUTSCH ASAS connectorautosport connector

A mil spec connector, in wiring talk, usually means a MIL-DTL-38999 circular connector: a miniature, high-density, environment-resistant connector with removable crimp contacts. Series III couples with a triple-start thread and comes in nine shell sizes, 9 to 25. TE's DEUTSCH Autosport (AS) range is a racing-specific family that TE says saves weight and space over standard military designs, with up to 128 ways.125

At a glance

Specification

MIL-DTL-38999 rev M (11 Feb 2015): four series, removable crimp or hermetic fixed contacts

Sourced1
Coupling
  • Bayonet, threaded or breech by series
  • Series III is triple-start threaded
Sourced12
Series III shell sizes9, 11, 13, 15, 17, 19, 21, 23, 25 (codes A-J)Sourced2
Contact sizes22D (5 A), 20 (7.5 A), 16 (13 A), 1223 ASourced3
Temperature-65 to 175 °C or -65 to 200 °C depending on finish classSourced21
Mating cycles
  • 500 standard
  • 1500-cycle versions exist
Sourced2
Most contacts in a Series III shell128arrangement 25-35, all size 22DSourced3
DEUTSCH AS waysMedium- and high-density, up to 128 waysSourced5
AS families

AS Standard, ASDD, ASL (MicroLITE), ASX (XtraLITE), ASU (UltraLITE), ASHD, AS Hermetic

Sourced6

What a mil spec connector is

MIL-DTL-38999 is the US military detail specification for miniature, high-density, quick-disconnect circular connectors.

Rev M covers four series, either environment resistant with removable crimp contacts or hermetically sealed with fixed contacts, rated -65 to 200 °C unless a slash sheet says otherwise.1

Several makers build to the same slash sheets. Glenair, for example, lists the D38999/20 wall-mount receptacle as QPL qualified, with a red band that shows when the plug is fully mated.26

38999 Series III: shells, finishes and part numbers

Contact type letters
  • P pin / S socket500 cycles
  • H pin / J socket1500 cycles
  • A / B inserts without contacts
Sourced2
KeywaysN (normal) plus alternates A, B, C, D, ESourced2
Selected D38999 Series III finish classes (Glenair D38999/20 sheet)2
ClassShell and finishSalt sprayTemperature
WAluminium, cadmium olive drab over electroless nickel500 h-65 to 175 °C
FAluminium, electroless nickel48 h-65 to 200 °C
TAluminium, nickel-PTFENot stated-65 to 175 °C
JComposite, cadmium olive drab500 h-65 to 175 °C
MComposite, electroless nickel500 h-65 to 200 °C

A Series III part number reads like D38999/20WA35PN: slash sheet (20 = wall-mount receptacle), finish class, shell size code, insert arrangement, contact type and keyway. Shell code A is size 9 and J is size 25.2

Contact sizes and how many fit

The -35 arrangements use only size 22D contacts and give the highest density.

Series III contact ratings and the all-22D (-35) arrangements (Glenair MIL-STD-1560 reference)3
Contact sizeMax currentWire rangeExample arrangements (contacts)
22D5 A22-28 AWG (0.34-0.08 mm²)9-35 (6), 11-35 (13), 13-35 (22), 15-35 (37), 17-35 (55), 19-35 (66), 21-35 (79), 23-35 (100), 25-35 (128)
207.5 A20-24 AWG (0.5-0.2 mm²)17-26 (26), 19-32 (32), 23-53 (53)
1613 A16-20 AWG (1.3-0.5 mm²)11-2 (2), 13-4 (4), 17-8 (8), 25-29 (29)
1223 A12-14 AWG (3.3-2.1 mm²)17-6 (6), 21-11 (11), 25-19 (19)

mm² values are standard AWG conversions added for convenience.

The count grows from 6 contacts in shell 9 to 128 in shell 25.3

Crimp, insertion and removal tools

Series III power contacts take an eight-indent crimp.

Crimp tool checkVerify M22520/2 tools with M22520/3 gaugesSourced4
Military tool numbers for Series III power contacts (Glenair tool sheet)4
Contact sizeCrimp toolPositionerInsertion / extraction tool
22D pinM22520/2-01M22520/2-09M81969/14-01
22D socketM22520/2-01M22520/2-07M81969/14-01
20M22520/2-01M22520/2-10M81969/14-10
16M22520/1-01M22520/1-04M81969/14-03
12M22520/1-01M22520/1-04M81969/14-04

One M22520/2-01 frame covers sizes 22D and 20 with the right positioner; sizes 16 and 12 use the larger M22520/1-01. Plastic M81969/14 tools insert and extract contacts from the rear.4

DEUTSCH Autosport (AS) connectors

AS lineageRetailers say AS was derived from MIL-DTL-38999 Series 1.5Only retailer listings state the Series 1.5 origin. TE's AS pages compare AS with 'standard military designs' but do not name a 38999 series.Researched, unverified
AS contact and tooling numbersNot confirmedTE's AS technical manual (1-1773721-9) holds AS contact and tool part numbers; we could not read it, so this page does not list AS-specific tools.Researched, unverified
ASDD 7-11About 80% of the length of a standard shell size 8Sourced7
AS007-35SN example (TE product page)8
ItemValue
SeriesDEUTSCH AS Micro, receptacle, 2-hole flange
Shell / layoutShell size 7, layout 7-35, 6 positions
ContactsSize 22D sockets, rear insertion, not preloaded
ShellAluminium alloy, black zinc
CouplingBayonet peg retention, keyed, code N
Temperature-55 to 175 °C (-67 to 347 °F)
SealingDust 6, water 7 (IP67), immersion
Durability500 cycles

TE describes the DEUTSCH AS Standard series as the first range designed for professional racing, lighter and smaller than standard military connectors. It lists conductive black zinc shells, interfacial wire sealing and arrangements up to 128 ways.5

The smaller AS families shrink the shell further. One example is the AS007-35SN, a shell size 7 AS Micro receptacle with six size 22D sockets, the mate for the motorsport plug on Bosch's LSU 4.9 wideband sensor.810

TE lists motorsport data acquisition, engine and suspension testing, aerodynamics and power transmission as AS uses. Bosch Motorsport sells AS, ASL, ASU, ASX and ASDD connectors from 3 to 128 pins for its harnesses.79

Common mistakes

Crimping 38999 contacts with an open-barrel tool is the big one.

They need the M22520 indent crimper with the positioner for that contact size, and the tool should be checked with M22520/3 gauges.4

Mixing keyways is the next. N is the normal keyway and A-E are alternates, so a plug and receptacle with different letters will not mate even when shell and insert match.2

CAD and drawings

  • CatalogueDEUTSCH Autosport Interconnection Solutions catalog 1-1773721-8 · 1-1773721-8Medium11Download from TE Connectivity ↗No login at last check; the maker may change this

We link to the maker's own downloads and do not rehost drawings, 3D models or specifications: the makers' terms grant no redistribution. Our cavity maps are drawn from the cavity numbers, never traced from these drawings.

Crimp and assembly quick card

Strip lengthTBCNot published in the documents we could read; TBC.Researched, unverified
Crimp height

Not applicable: machined contacts use indent crimp tools M22520/2-01 (sizes 24-20) or M22520/1-01 (size 16) with the listed positioner

Sourced · mediumMedium11
Pull-out force (minimum)TBCNot published in the documents we could read; TBC.Researched, unverified
Application spec

TE Autosport catalog 1-1773721-8 reference guide (contacts, tools, positioners)

Sourced · mediumMedium11

Assembly

  1. Crimp size 24-20 contacts in M22520/2-01 and size 16 in M22520/1-01, each with the positioner listed for that contact (e.g. M22520/2-09 pin / M22520/2-07 socket for size 22 standard contacts).Medium11
  2. Insert and remove with the colour-coded plastic tool for the contact size (M81969/14-01 size 22/23, M81969/14-10 size 20, M81969/14-03 size 16, 605837 size 24).Medium11
  3. Fill unused cavities with filler plugs 600300-24 / -22 / -20 / -16 by contact size.Medium11

Removal

  1. Use the same M81969/14 insert/extract tool for the contact size.Medium11

Summarised in our own words from the maker's application specifications and instruction sheets cited above. Disconnect the battery before working on a vehicle harness. A crimp is only as good as its pull test: check samples with your tool and wire before building a loom. Choosing a crimp tool →

Kit parts for this family

ItemPart numberDescriptionWireQtySource
Cavity plug600300-24 / 600300-22 / 600300-20 / 600300-16Filler plugs by contact sizeAllper unused cavityMedium11
Boot202K121 / 202K132 / 202K142 / 202K153 / 202K163 / 202K174Raychem straight boots for AS shells: Mini and 08 = 202K121, 10 = 202K132, 12-14 = 202K142, 16-18 = 202K153, 20-22 = 202K163, 24 = 202K174All1Medium11
Boot222K121 / 222K132 / 222K142 / 222K152 / 222K163 / 222K174Raychem 90° boots, same shell mapping (16-18 = 222K152)All1Medium11
Boot204W221 / 224W221; 203W301-25-G02 / 223W601Raychem boots for ASL / ASC / ASU and ASX shellsAll1Medium11
BackshellCX6566-000 or Glenair Band-IT 600-057 / 600-083Braid termination options suggested by TE for screened harnessesTE names these as options; fit by shell size not checked.All1Low11
Crimp toolM22520/2-01; M22520/1-01Crimp frames for size 24-20 and size 16 contactsAll1Medium11
Removal toolM81969/14-01, M81969/14-10, M81969/14-03, 605837Plastic insert/extract tools for size 22/23, 20, 16 and 24All1Medium11

Where it's used

Our harness designs

Not used in our current harness designs.

Factory (OEM) use

No factory ECU in our pinout library uses this connector family.

Frequently asked

What is a mil spec connector?

In vehicle wiring it usually means a MIL-DTL-38999 circular connector. The US military specification covers miniature, high-density, environment-resistant connectors with removable crimp contacts, or hermetic versions with fixed contacts, rated -65 to 200 °C unless a slash sheet says otherwise. Many makers build to the same part numbers, such as D38999/20 and D38999/26.12

What is the difference between 38999 Series I, II, III and IV?

The series differ mainly in how the plug couples. MIL-DTL-38999 rev M covers four series with bayonet, threaded or breech coupling. Series III uses a triple-start threaded coupling. Check the slash sheet of the exact part, because shells, finishes and inserts differ between series.Medium12

What are DEUTSCH Autosport connectors?

They are TE's racing-specific circular connectors, sold as the DEUTSCH AS range. TE says AS Standard saves weight and space over standard military designs and offers up to 128 ways. Smaller and denser families include ASL, ASX, ASU, ASDD and ASHD. They appear in data logging, engine testing and sensor harnesses such as Bosch's motorsport LSU 4.9.56710

What crimp tool do 38999 contacts use?

Sizes 22D and 20 use the M22520/2-01 eight-indent hand crimper with a size-specific positioner: M22520/2-09 for 22D pins, /2-07 for 22D sockets and /2-10 for size 20. Sizes 16 and 12 use the M22520/1-01 with the M22520/1-04 positioner. Insert and extract with the matching M81969/14 tool.4

How many pins fit in a 38999 shell?

It depends on shell size and contact size. With all size 22D contacts (the -35 arrangements), Series III goes from 6 contacts in shell 9 to 128 in shell 25. Larger contacts mean fewer positions: a shell 25 holds 29 size 16 contacts or 19 size 12 contacts in the standard arrangements.3

Keep going

Related

Sources

11 sources
  1. MIL-DTL-38999M detail specification, connectors, electrical, circular, miniature, high density (11 Feb 2015) · US Department of Defense (via EverySpec) · standard · retrieved 2026-10-27
  2. D38999/20 wall-mount receptacle, MIL-DTL-38999 Series III · Glenair · vendor-doc · retrieved 2026-10-27
  3. MIL-STD-1560 and other standard contact arrangements (SuperNine reference) · Glenair · vendor-doc · retrieved 2026-10-27
  4. MIL-DTL-38999 Series III and IV contact crimp and installation tools · Glenair · vendor-doc · retrieved 2026-10-27
  5. DEUTSCH AS Standard series connectors · TE Connectivity · vendor-doc · retrieved 2026-10-27
  6. DEUTSCH circular mil spec connectors · TE Connectivity · vendor-doc · retrieved 2026-10-27
  7. Autosport AS connector ranges · TE Connectivity · vendor-doc · retrieved 2026-10-27
  8. AS007-35SN DEUTSCH AS Micro receptacle · TE Connectivity · vendor-doc · retrieved 2026-10-27
  9. Connectors datasheet · Bosch Motorsport · vendor-doc · retrieved 2026-10-27
  10. Lambda Sensor LSU 4.9 product page · Bosch Motorsport · vendor-doc · retrieved 2026-10-27
  11. DEUTSCH Autosport Interconnection Solutions catalog 1-1773721-8 (12/22), distributor-hosted · TE Connectivity, hosted by IBS Electronics · vendor-doc · retrieved 2026-10-28

Facts come from manufacturer documents and distributor spec pages, read on the retrieval date shown. Part numbers and ratings change: confirm against the maker's current drawing before you order. Manufacturer names identify parts only; no affiliation is implied.