Ford Coyote · 2018-23

Coyote Gen 3 specs: horsepower, firing order, injectors, swaps and sensors

The Coyote Gen 3 is a naturally aspirated 5.0 L V8 engine from Ford (2018-23) with port and direct injection and coil-on-plug ignition. Its firing order is 1-5-4-8-6-3-7-2 (some versions differ, see below). The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low21819187945

Power: 460 hp @ 7,000 rpm · Torque: 420 lb-ft (569 Nm) @ 4,600 rpm (Ford rating, not a GAINS measurement)Medium2

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2018-23Catalog range across the variants on this page.Researched, unverified
Displacement5.0L5,038 cc from bore × strokeSourced · medium2
LayoutV8Researched, unverified
Bore × stroke93 × 92.7mm3.66 × 3.65 inSourced · medium2
Compression ratio12.0:1Sourced · medium2
Redline7,500rpmSourced · medium2
Aspirationnaturally aspiratedResearched, unverified
Fuel injectionport and direct injectionLow confidence87945
BlockaluminiumSourced32
Cylinder liners

plasma transferred wire arc (PTWA) sprayed bores, 93 mm bore (same as GT500 Predator)

Sourced32
Main capscross-boltedModular familySourced32
Crankshaftforged steel, 92.7 mm strokeSourced32
Connecting rodssinter-forgedBoss 302-derived, per SteedaSourced32

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

Coyote Gen 3 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Ford rating)460hp @ 7,000 rpmSAE net, 2018-20 Mustang GT; bore/stroke/CR per Ford 2018 EU tech spec (via search index); redline not officially published (7400-7800 reported, 7500 per Wikipedia)Sourced · medium2
Torque (Ford rating)420 lb-ft @ 4,600 rpm569 NmSourced · medium2
Other published ratings
  • 2019-20 Bullitt / 2021-23 Mach 1: 480 hp @7000, 420 lb-ft @4600
  • EU 2018: 450 PS @7000, 529 Nm @4600
  • EU Mach 1: 460 PS @7250, 529 Nm @4900
Sourced · medium2

Coyote Gen 3 firing order

The order the cylinders fire in, with the cylinder numbering the source states.

  1. 1
  2. 5
  3. 4
  4. 8
  5. 6
  6. 3
  7. 7
  8. 2
  9. Medium1819Sourced · medium
FRONTLeft (driver) bank52657784Right (passenger) bank11283643
Top view, front of the engine at the top. Small badges show each cylinder's place in the firing sequence. Numbered front to back: 1-4 on the right (passenger-side) bank, 5-8 on the left.

Mustang, Boss 302 and 2011-14 F-150 engines use the first order; 2015-on F-150 engines use the second (truck camshaft). Check where your engine came from.

Coyote Gen 3 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

Style
  • GDIdirect injection, solenoid
  • Plus EV14 port injectors
Low confidence87945
OEM part numbersPort: BR3Z-9F593-Aper OnAllCylinders guideLow confidence87945
Length
  • OtherDI
  • Port injectors standard length
Low confidence87945

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks 1000cc EV14 injectors (set of 8) · 17U-04-0095-8Low61000 cc/min maker listing (basis not stated)Check connector Connector fit not stated on the maker listing.
Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS403-1000HMedium201000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Plug-in
Injector Dynamics ID1050-XDS (set) · 1050.60.14.14B.8Medium41011121065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec)Plug-in

Coyote Gen 3 swap

Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank positionFord JR3Z-6C315-ASourced · medium13163-pin (forum report)2018-25 Mustang 2.3/5.0/5.2Parkway Ford lists Motorcraft DY-1409 for 5.0L 2018-23
Cam positionFord HX7Z-6B288-ASourced · medium13Not yet sourced2018-25
KnockFord JR3Z-12A699-A (orig JR3A-12A699-AA) | AL3Z-12A699-A also listed to 2023Sourced · medium131417Not yet sourced2018-23 Mustang; F-150 2018-25
MAFFord 8V2Z-12B579-ASourced · medium13Not yet sourced2015-23
O2 (upstream)Ford JR3Z-9F472-B / -C (RH) | JR3Z-9F472-D (LH; repl Motorcraft DY-1441, JR3Z-9F472-A)Sourced · medium13Not yet sourced2018-23 Mustang
O2 (downstream)Ford JR3Z-9G444-A (RH) | JR3Z-9G444-B (LH) | GK4Z-9G444-H (repl DY-1335)Sourced · medium1315Not yet sourced2018-23

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank triggerOEM sensor Ford JR3Z-6C315-A2018-25 Mustang 2.3/5.0/5.2Sourced · medium1316
Cam sensorOEM sensor Ford HX7Z-6B288-A2018-25Sourced · medium13
Valve timingTi-VCT4 phasersResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (hot-wire / hot-film). Gen 3 control pack exists (M-6017-M50BA) but sheet not read; inferred from Gen 2/Gen 4 packs.Low1

Factory oxygen sensors

Downstream O2 sensors: yes.Low1

Known limits (reported)

A Ford Performance engineer (EngineLabs) says the production rods and pistons are not up to greatly elevated power.32

Common first upgrades (reported)

Builders most often report upgrading: Manley forged H-beam rods with ARP2000 bolts and Mahle forged pistons (as in Ford Performance Gen 3 Aluminator).32

Valvetrain, factory engine management and weak points across every generation are on the Ford Coyote guide.

Vehicles with the Coyote Gen 3

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

20 sources
  1. Ford Coyote Gen4 sensors (E-809) · www-performanceparts.app.ford.com · vendor-doc · retrieved 2026-10-25
  2. Coyote Gen 1/2 (E-1017) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Coyote Gen 3 (E-1018) · enginelabs.com · press · retrieved 2026-10-25
  4. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1205) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1208) · nipponpower.com · reference · retrieved 2026-10-25
  7. OEM injector (E-1212) · onallcylinders.com · press · retrieved 2026-10-25
  8. OEM injector (E-1213) · onallcylinders.com · press · retrieved 2026-10-25
  9. OEM injector (E-1229) · fordmuscle.com · reference · retrieved 2026-10-25
  10. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. OEM sensors Ford Mustang (E-1327) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
  14. OEM sensors Ford F-150 (E-1328) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
  15. OEM sensor Ford part pages (E-1331) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
  16. Ford Coyote crank connector change (E-1333) · mustang6g.com · community · retrieved 2026-10-25
  17. Ford Coyote knock retail (E-1334) · lmr.com · vendor-doc · retrieved 2026-10-25
  18. Firing order and numbering: Ford 5.0 Coyote (E-4808) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
  19. Firing orders: Ford engines (reference list) (E-4816) · aa1car.com · reference · retrieved 2026-10-28
  20. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.