Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
4.6 2V horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
- Mustang GT 1996-97: 215 hp / 285 lb-ft
- 1998: 225 hp / 290 lb-ft
- 2001 Bullitt: 265 hp / 305 lb-ft
- Crown Victoria/Grand Marquis 2003-12: 239 hp / 282 lb-ft
- CVPI 2004-11: 250 hp / 297 lb-ft
- F-150 1997-2000: 220 hp @4400 / 290 lb-ft @3250
- F-150 2001-05: 231 hp @4750 / 293 lb-ft @3500
- Torque conflict 302 vs 300 lb-ft (Cars.com)
4.6 2V firing order
The order the cylinders fire in, with the cylinder numbering the source states.
4.6 2V injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Fuel Injector Clinic (FIC) FIC 650cc High-Z injector set · IS402-0650H19 | 650 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Needs adapter harness plug change; FIC set includes USCAR pigtails (PGTUSC8) or optional plug-and-play adapters PADPUtoJ8 |
| Fuel Injector Clinic (FIC) FIC 1200cc High-Z injector set · IS402-1200H19 | 1200 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Injector Dynamics ID1050-XDS (set) · 1050.60.14.14.8591113 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
| Injector Dynamics ID1300-XDS (set) · 1300.60.14.14.86101214 | 1335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position | Ford 1W7Z-6C315-AB (repl 1W7Z-6C315-AA)Sourced · medium15 | Not yet sourced | 2001-14 Mustang 4.6/5.4/5.8 |
| Cam position | Ford 1W7Z-6B288-ABSourced · medium15 | Not yet sourced | 2001-14 Mustang 4.6/5.4/5.8 |
| Knock | Ford F8CZ-12A699-AASourced · medium1516 | Not yet sourced | 1999-2004 Mustang 4.6 (SOHC/DOHC)F-150 4.6 1997-99 F6ZZ-12A699-AA; 1999-2010 XL3Z-12A699-AA |
| MAF | Ford F6UZ-12B579-ABRM (1999-2001) | YC2Z-12B579-BARM (2002-04)Sourced · medium15 | Not yet sourced | Mustang 4.6 |
| O2 (upstream) | Ford XC2Z-9F472-AA (1999-2005, -> GU2Z-9G444-A)Low confidence15 | Not yet sourced | Mustang 4.6 |
| O2 (downstream) | Ford 1R3Z-9G444-AA (2001-04) | XR3Z-9G444-CA (1999-2000)Sourced · medium15 | Not yet sourced | Mustang 4.6 |
Ignition and triggers
Tuning notes
Factory load sensing
No direct source found for 2V; see 3V row (HEGO) for later family practice. Researched, unverified
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Forum consensus names the rods first and calls the hypereutectic pistons brittle, so detonation under boost can break ring lands.Medium1234
Common first upgrades (reported)
Builders most often report upgrading: forged rods (minimum), forged pistons.Medium1234
Valvetrain, factory engine management and weak points across every generation are on the Ford Modular guide.
Vehicles with the 4.6 2V
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
19 sources
- Factory ratings: Ford Modular 4.6 2V (E-705) · en.wikipedia.org · reference · retrieved 2026-10-25
- Factory ratings: Ford Modular (4.6 3V, 4.6/5.4 4V) (E-706) · en.wikipedia.org · reference · retrieved 2026-10-25
- Ford Modular 2V/3V/4V/5.4 (E-1014) · en.wikipedia.org · reference · retrieved 2026-10-25
- 4.6 2V limits (E-1015) · stangnet.com · community · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1205) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- OEM injector (E-1212) · onallcylinders.com · press · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Ford Mustang (E-1327) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Ford F-150 (E-1328) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
- Firing order and numbering: Ford Modular V8 (E-4809) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
- Firing orders: Ford engines (reference list) (E-4816) · aa1car.com · reference · retrieved 2026-10-28
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.


