Ford Barra · 2002-16

Barra 4.0 NA specs: horsepower, injectors and sensors

The Barra 4.0 NA is a naturally aspirated 4.0 L inline-6 engine from Ford AU (2002-16) with port fuel injection and coil-on-plug ignition. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low123

Power: 262 hp @ 6,000 rpm · Torque: 288 lb-ft (391 Nm) @ 3,250 rpm (Ford AU rating, not a GAINS measurement)Medium12

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2002-16Catalog range across the variants on this page.Researched, unverified
Displacement4.0L3,983 cc from bore × strokeSourced · medium12
Layoutinline-6Researched, unverified
Bore × stroke92.26 × 99.31mm3.63 × 3.91 inSourced · medium12
Compression ratio10.3:1Sourced · medium12
Aspirationnaturally aspiratedResearched, unverified
Fuel injectionport fuel injectionLow confidence3
Blockcast iron, aluminium headSourced · medium12
Cylinder linersnoneiron blockSourced · medium12
Crankshaftcast nodular ironforumSourced · medium12
Connecting rodsE-Gas variant: stronger H-section rodsSourced · medium12

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

Barra 4.0 NA horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Ford AU rating)262hp @ 6,000 rpmConverted from 195 kW (x1.341); FG Falcon Barra 195Sourced · medium12
Torque (Ford AU rating)288 lb-ft @ 3,250 rpm391 NmSourced · medium12
Other published ratings
  • BA Barra 182: 182 kW, 380 Nm, 9.7:1
  • BF Barra 190: 190 kW @5250, 383 Nm @2500, 10.3:1
Sourced · medium12

Barra 4.0 NA firing order

Barra 4.0 NA injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

OEM part numbers0280 156 123forum claim for BA I6; unverifiedLow confidence3
MakerBoschforumLow confidence3
FeedtopLow confidence3

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
KnockBosch 2-pin knock sensor (Bosch number not captured)Low confidence5Not yet sourcedBA/BF/FG Falcon
MAPFord XS6F-9F479-ABLow confidence4Not yet sourcedAU/BA/BAII/BF/FG Falcon 4.0, Territory SX/SY (per dealer listing title)Turbo applicability not stated
O2 (upstream)Bosch 0 258 986 603 (marketplace listing, OE ref BA-9F472-A in listing URL)Low confidence5Not yet sourcedAU/BA/BF/FG/FGX Falcon, TerritoryMarketplace listing; position not stated

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Valve timingtwin VCTfrom BFResearched, unverified

Tuning notes

Factory load sensing

No source found for strategy (Wikipedia article silent).Low12

Factory oxygen sensors

Downstream O2 sensors: varies.Low12

Known limits (reported)

Forum and Australian press name the rods and rod bolts as the first limit, especially at high rpm or heavy low-rpm boost.Medium12

Common first upgrades (reported)

Builders most often report upgrading: forged rods/pistons, main studs and girdle (forum).Medium12

Valvetrain, factory engine management and weak points across every generation are on the Ford Barra guide.

Vehicles with the Barra 4.0 NA

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Factory ratings: Ford Barra 4.0 I6 (NA and turbo) (E-711) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Barra 4.0 NA/Turbo (E-1025) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. OEM injector (E-1226) · fordmods.com · reference · retrieved 2026-10-25
  4. Barra MAP OEM (E-1340) · jeffersonfordparts.com.au · vendor-doc · retrieved 2026-10-25
  5. Barra knock/O2 marketplace (E-1342) · ebay.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.